Search results

R
Am I being Paranoid about my Temperatures????

I was wondering if you guys could tell me if my CPU and System is running too hot or if is fine. I have an XP 1900 and my System temp at Idle is: 33.00C and CPU temp is 41.50- 42.50C. I ran Prime95 last night and I got System 32.00C and CPU 45.50, This was after 4 hours of Prime95. Then...
- rsilva28
- Thread
- Aug 9, 2002
- Replies: 7
- Forum: Cases & Cooling
R
Pretty Amazing: my Athlon XP1500 running stable @ 1.63v

Hey Guys, how are you doing? Well, After reading fatbrain's article. I decided to go home and try it to, I had my Core voltage set to 1.770 and my Temps were at idle 45.50 and full at 52.00 and case temp was 31C so I started to drop the Core voltage. I dropped it to 1.700 and ran Prime95...
- rsilva28
- Post #5
- Aug 1, 2002
- Forum: Cases & Cooling
R
Whats the best way to clean up excess and long power cables?

Hey Armageddon415, How are you? I wanted to ask you, How good are those Round Cables? Did you buy them from that website you gave us?? Are they any good?? I'm just asking because I went to go purchase some today at a store and the guy was telling me that if they're not made right they can...
- rsilva28
- Post #18
- Jul 26, 2002
- Forum: Cases & Cooling
R
Who's got a painted sx10x0 case? need ideas and examples and how to paint?

Hey Flowerman, What's up? Listen, What is the temperature on your CPU?? I'm working on lowering the temperature on my CPU. Let me know, THxs
- rsilva28
- Post #3
- Jul 25, 2002
- Forum: Cases & Cooling
R
Case/chipset temps

Hey, How are you doing? I'm having the same issue with my PC, I'm trying to lower the Temp on mine. According to the Winbond Hardware that came with my MB, It says that my CPU is running at 47C on Idle and it goes up to 51.00 - 52.00C when being worked on. Now I was wondering if anyone...
- rsilva28
- Post #3
- Jul 25, 2002
- Forum: Cases & Cooling
R
Windows 98 SE question

You can't use the Win98SE original cd, You need to have the Win98SE Upgrade cd so that you can install over the old Win98.
- rsilva28
- Post #6
- Feb 28, 2001
- Forum: Computer Building
R
WinMe Shutdown Problem

Hi, I'm having a problem with WinMe Shutting down. I upgraded from Win98 to WinMe, Just to try it out. I noticed it improved my DSL connection, Faster than Win98 for some reason. Everything is been running fine, Until Friday that I installed my Quickcam. After I installed it I played...
- rsilva28
- Thread
- Feb 28, 2001
- Replies: 0
- Forum: Computer Building
R
WinMe Shutdown Problem

Hi, I'm having a problem with WinMe Shutting down. I upgraded from Win98 to WinMe, Just to try it out. I noticed it improved my DSL connection, Faster than Win98 for some reason. Everything is been running fine, Until Friday that I installed my Quickcam. After I installed it I played...
- rsilva28
- Thread
- Feb 28, 2001
- Replies: 0
- Forum: Computer Building
R
Windows Dumped My CD ROM Drives, and Disk Controllers!!

First of all I would do what Pederv said, Which you can also just copy the win98 folder from the win98 cd to your root of C:\ Either or. Then go into your Device Manager, Try to remove the Primary Ide Controller dual fifo with the yellow exclamation mark, then reboot and let windows pick it...
- rsilva28
- Post #3
- Feb 16, 2001
- Forum: Computer Building
R
Help me please!!!Computer wont shutdown.

When it restarts, Does it even go into Win98?? Or it just restarts and restarts over and over again?
- rsilva28
- Post #3
- Feb 16, 2001
- Forum: Computer Building
R
how do I copy win NT on a burner?

You should be able to copy it just like you copy any other cd, I have a copy and I had no problems with copying it. Do you get any errors when you copy other cd's or is it just this one? Because if you get errors copying other cd's then you might want to get the burner checked or exchange it...
- rsilva28
- Post #2
- Feb 16, 2001
- Forum: Computer Building
R
Windows CD-Rom drivers corrupted.

Just copy the Cab Files from another win98 cd-rom to your hard drive. If you look in a win98 cd-rom, You'll see a folder called "Win98" Copy that folder on to your hard drive. Whenever I do an install I usually create a folder in the C:\ called win98, Then I copy the win98 folder...
- rsilva28
- Post #5
- Feb 16, 2001
- Forum: Computer Building
R
DVD Drive choppy - What to do?

I would try adding more memory and see if that helps. If not then install a better video card. Try that and see what happens.
- rsilva28
- Post #2
- Feb 16, 2001
- Forum: Computer Building
R
Half Life and Win2000 Pro....HELP!!

Try setting it to OpenGL, That happened to me one time and I had the wrong settings. When I would try direct3D and went into a game, I noticed right from the beginning that it was loading so slow and my ping was super high. I think for Voodoos , If you use Direct3D you have to choose...
- rsilva28
- Post #2
- Feb 4, 2001
- Forum: Computer Building
R
Display malfunction: Apparently G400 or monitor problem??

What do you have your Display Settings set to? Let me know.
- rsilva28
- Post #2
- Jan 17, 2001
- Forum: Computer Building
R
Please help me please!!!

Are you sure that your mother board holds up to a PIII 500? We had a similar problem, We put a PIII 800 on the MB and it wouldn't give us any picture. The reason why was because the motherboard wouldn't hold PIII 800. So check your motherboard specs and see what it holds up to, You may just...
- rsilva28
- Post #6
- Jan 17, 2001
- Forum: Computer Building
R
GeForce 2 GTS + Athlon 800/KA7 - AGP Apature problems

Are you using an AMD approved PSU? Also, Are you using AMD approved memory? That seems to be the problem with AMD systems when freezing up. Go to the amd's web page and check it out. Let me know if this helped you at all.
- rsilva28
- Post #3
- Jan 17, 2001
- Forum: Computer Building
R
Need help, network problems :(

Go into your Network Neighborhood Properties and double click on the Etherlink adapter. Go into the Advanced Tab, Under Propeties click on Media Type. Then on Value, Choose 100Mbps Full-Duplex. Hit OK, OK again and reboot, Then see if it works. Let me know what happens. I hope that helps.
- rsilva28
- Post #2
- Jan 17, 2001
- Forum: Computer Building
R
Help: Computer won't boot up after installing CDRW

If you have a Cd-rom and a Cd-rw, Hook them up on the same cable on the secondary IDE. Make sure your Jumper settings are correct on the drives. Either put the cd-rom as a slave and cd-rw as master or Vise Versa. Make sure you have the Hard drive on the Primary IDE alone. Try and see if...
- rsilva28
- Post #3
- Jan 17, 2001
- Forum: Computer Building
R
New A7V system I built has a bug.

Go into your BIOS SETUP and boost your AGP Aperture Size to 256M and if it doesn't freeze, Then try it on 128M. See if that helps out. Let me know.
- rsilva28
- Post #6
- Jan 17, 2001
- Forum: Computer Building
R
MSI KT7Pro 2-A UDMA 100 Problem! Please Help!

Try putting them on seperate Ide's, Put one on the primary Ide and the other on the Secondary Ide. If that works, You'll get better performance than having them both on the same IDE cable. Let me know how it goes.
- rsilva28
- Post #2
- Jan 9, 2001
- Forum: Computer Building
R
mp3..to wave

If you give me your e-mail, I can send you a little software that'll do all those types of conversions. Is pretty cool and real simple to use. I use it all the time and it works great, Is a small program. Let me know if you want it.
- rsilva28
- Post #5
- Jan 9, 2001
- Forum: Computer Building
R
Swapping MOBOs question

No, There's no registry issues at all. Just swap everything to the new motherboard, What OS are you using? I would start by connecting the peripharels 1 by 1, So that Windows picks it up. Sometimes if you throw everything in at once, You might get some errors and you'll go to install...
- rsilva28
- Post #2
- Jan 9, 2001
- Forum: Computer Building
R
Beeps coming from my computer.

Most likely you have the cables that come from the case for the speaker, HDD, Reset etc... You probably have the speaker and the HDD one hooked up wrong. Check your motherboard book to see which way the positive and the negative goes. I hope this helps. rsilva28
- rsilva28
- Post #3
- Jan 8, 2001
- Forum: Computer Building
R
Problem with Novell...

Reload the Novell client, That should work. Let me know.
- rsilva28
- Post #2
- Jan 8, 2001
- Forum: Computer Building
R
random freezes, hanging etc

Hey guys, I might have a similar problem to you guys that I cant seem to figure out. When I leave my computer on for a few hours and I connect to the internet through a USB DSL modem, Sometimes when I surf for a 10-15min it will freeze my whole system up and I have to power it down. Then...
- rsilva28
- Post #13
- Jan 8, 2001
- Forum: Computer Building
R
New PC Problems

THere's a possibility that the motherboard does not support that PC133 memory you're trying to use. try using a PC100 and see if that works. Make sure the video card is pressed in all the way. Also, Does it make a long beep when you turn on the PC? Beeeeeepppp, Beeep, Beep? Does it beep...
- rsilva28
- Post #5
- Jan 8, 2001
- Forum: Computer Building
R
WW bios for Abit KT7.

Hello, I was wondering if you know, If any of these bios upgrades would help with the USB ports? I have a USB DSL modem and If I leave my computer on for a long time and go into the internet, After surfing for a while, My internet would freeze and the whole computer would freeze and I...
- rsilva28
- Post #19
- Jan 8, 2001
- Forum: Motherboards
R
what file is my email address's (in outlook 2k)

The .pst file is located in your C:\WINDOWS\Local Settings\Application Data\Microsoft\Outlook\outlook.pst I hope that helps.
- rsilva28
- Post #2
- Jan 4, 2001
- Forum: Windows
R
Microsoft Paint Problem

I was wondering if anyone knows how come when I go to Microsoft Paint and go to File, Save as, File Type: .JPEG or .Gif I dont have those 2 options under file type. Does anybody know how to get those 2 options?? BTW, I'm using Windows98 SE. Thanks in advanced.
- rsilva28
- Thread
- Jan 4, 2001
- Replies: 6
- Forum: Computer Building

RESOURCES

Top Bottom