Search results

  1. M

    My hard drive is really messed up.

    I need to get into this WD 120gig HD to get lots of data off, but I cant figure out a way to get in without XP seeing it and throwing up the blue screen o death. I have tried it as a master, slave and even in an external USB hard drive case but all with the same results. I fear that I will...
  2. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    I have had this cpu for a few weeks now. I have not tried any other OS yet, but I may format and try 98 SE..... Im am running out of ideas and options.
  3. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    WElp, I just got the latest bios, the 5W dated 10/22/01. No change. Still wont even look at the floppy drive before windows loads. I guess I will take the heat sink off, clean off old artic silver, reapply and try it again.
  4. M

    Ath. XP 1700 shows up as 1100mhz?

    I am having the same problem, except when I put it at 1466, windows 2000 wont boot. I cant seem to figure it out!
  5. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    I am trying the BIOS thing again. I did it before, but it did not work. I may have gotten the wrong one. I am DL'ing the "KG75W.EXE". Its the latest one. Its one above the 5E. Hope this works!!
  6. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    Pederv, Yes, I am going into Soft Menu III and I have tried it both ways. I have set it to 1700+ (133) mode, then also to user select mode to get 1466. No dice. I have also used the jumper a few times to reset the CMOS to no avail. I am running out of ideas. Thanks for the help tho... any...
  7. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    2 sticks of 256MB, DDR pc2100, unbuffered/non parity Crucial RAM.
  8. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    I guess those of us with less than 2000 posts dont know what we are doing. I enter the bios, hit "set OPTIMIZED defaults"... and it puts me at 1100mhz when I boot up. When I TRY and FORCE it at 11x133....It wont load! I dont touch anything else! I dont touch the FSB.... Should it not load...
  9. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    Anyone?
  10. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    Well, Ive been playing and I have some news. I upped the core voltage from default (1.75 I think) to 1.825. I was able to load windows fully, but as soon as I tried to get on the net, it locked up. Time after time.... I moved the voltage up in .25 increments untill I got to 1.825 and each...
  11. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    I am using an Antec 400w power supply that is AMD approved. I have the FSB settings set to the normal, default settings and I am not even upping them. Maybe It will load if I start overclocking?! Any other ideas?
  12. M

    Cant get my AMD 1700+ to boot Win2k past 1100mhz!

    I have a 1700+ AMD XP chip with an ABIT KG7 mobo, 512 MB crucial ram, IMB hd, creative labs anilator 32mb ddr, SB x-gamer.... what gives? If I load the fail safe defaults, it runs fine at 1100, but as soon as I move it to normal, 1466, it wont start to load windows. As soon as it says...
  13. M

    AMD 1700+, Abit, win200 problems...

    My cpu is at 35 and the case is 29. This is at 1104mhz.
  14. M

    AMD 1700+, Abit, win200 problems...

    I am having some issues with my new computer. I just bought an AMD 1700+, Abit KG7, Antec 1030B with a 400 watt power supply installed, and 512 MB of crutial pc2100 RAM. When its set at 1100mhz, its usually fine. Windows 2000 loads and most is normal. When I up it to 1466mhz, it usually wont...
  15. M

    Can Win2K "talk" to WinME?

    Wow Mike, thanks for the huge reply. I will read through it and see what turns up! Thanks again!
  16. M

    Can Win2K "talk" to WinME?

    Good news, they are talking. I basically just want them to be able to share files, printer, internet etc. The only problem now is that I am having a hard time getting from the ME to the 2K machine because of passwords. But I can get into the ME from the 2k now with ease. Thanks guys
  17. M

    Can Win2K "talk" to WinME?

    << Hi, Details: 1. What kind of connection is your LAN? Cat5, Parrallel? >> cat5 << 2. What have you tried so far? Can you ping or anything? >> I dont know how to ping. I just got the names of the pc's and the correct domain for both. << 3. Give us a description of what you...
  18. M

    Can Win2K "talk" to WinME?

    << Gotta give us some more details than that. >> Ditto... Like what?
  19. M

    Can Win2K "talk" to WinME?

    I just installed win2k back on my fast computer and still have all of my backed up stuff on the old machine with winME. I am having a hard time getting the two networked. Anyone know how this can be done? Thanks
  20. M

    12x10x32x vs. 8x4x32 (Iomegas)

    Which one is better for the money? The cheapest I have seen the 12x is about $170, and I can get a 8x for $80 at Compusa. 80 bucks is a pretty good deal for a burner, but will I be happy with it? Thanks
  21. M

    What are some good fans to add to my case?

    Noise is an concern, as my FOP32-1 is at 38dba, and i dont want to go any louder than that. So i guess I am looking for the Max cfm under 38 db.
  22. M

    What are some good fans to add to my case?

    I am thinking of adding a fan on the side of my case, and possibly a blowhole on the top as well. What are some good fans to use? I guess I could use the largest that would fit, so the side can be pretty big. Can I just run down to Radioshack and get some fans to plug right in? How do I...
  23. M

    Overclocked T-Bird 900 to 1030, now its slower?

    When I boot the computer up, it says 10x103, so im sure that it did unlock corectly. My MBM5 also agrees, saying 1030. Is that what you mean by post? I have a Creative labs Geforce2 32MB DDR if that helps. I was playing UT again today, and it seems to be back to normal. I dont know what...
  24. M

    Global WIN FOP 32-1 broke my brand new TBIRD 750 Socket A

    I found it really easy to install the FOP32-1. All I did was put a torx driver between the fan blades to push down the clip so it wont slip off and hit the mobo. This also puts the pressure on the fat part of the clip so its really easy. It takes me about 10 seconds to remove/install it...
  25. M

    Overclocked T-Bird 900 to 1030, now its slower?

    I unlocked my T-bird 900 with the permatex window deffoger kit and upped the multplier to 10 and the FSB to 103. NOw when I play UT, it is much choppier than before? What happened? I also raised the volts to 1.85. The temps are good, being 32°C CPU and 26°C case with a few things running...
  26. M

    Best bang for the Buck, which case?

    TTT
  27. M

    Best bang for the Buck, which case?

    What about Antec? How do they compair $ to performance?
  28. M

    Best bang for the Buck, which case?

    I am in the market for a good OCing case where I can easilly add fans to keep the case temps low, to complement my FOP32 and Arctic Silver. What are my options, how much $$$ and where can I get it?
  29. M

    Super ORB vs. FOP32-1

    I see, so actually my FOP is probably keeping the die about 4-5° cooler than the super orb, i just cant tell. I get it. Thanks alot Mike, this makes me feel alot better for spending the extra cash on the fop! Now i just need to unlock more chip!
  30. M

    Super ORB vs. FOP32-1

    I am measuring the temps with the socket-thermistor. That is, I assume the factory installed temp sensor on my Abit mobo, right? How does the Super orb cheat?
  31. M

    Super ORB vs. FOP32-1

    I installed my new FOP32-1 about a week ago expecting to see some major temperature drops since I had the heap of crap Super Orb, or so everyone says.... Well, running my T-bird 900 at 946 and playing Unreal Tourny for a while, the super orb would keep my chip at 45°C, and the case would get up...
  32. M

    Unlock which bridges on TBird 900 to use 133 FSB on KT7A-RAID?

    Can someone please clue me in? Why do you want to underclock the CPU and raise the FSB to 133? I am assuming that the system will still be at a higher clock speed, but i am not sure on the specific reasons. Will the pci slots, vid card and HD still be ok at these speeds? Thanks
  33. M

    What are the Best programs for Benchmarking/Stability testing?

    I got the Prime95 and its doing a self test now. When its done, i can do the torture test, right? What exactly does that do?
  34. M

    What are the Best programs for Benchmarking/Stability testing?

    I have started overclocking my system and would like to measure/test everything in a systematic way. What are the best and easiest programs to use and where can I get them?
  35. M

    First time OverClocker needs help!

    OK, now the only other question I have is: how do you do the window defroster trick?
  36. M

    First time OverClocker needs help!

    THANKS BCYL, that is what i was waiting for. So then i am going have to use the pencil trick or something like that? Which is safer on the hardware? FSB OCing or Multiplier OCing?
  37. M

    ThermalTake Super ORB sucks??

    I have the super orb on my sustem with a T-Bird 900 and I have never seen it over 47°C. Even after playing UT for hours. At idle its about 29, and full load its usually 45. I have heard both reviews on it, and so far its OK. Not great, but it gets the job done.
  38. M

    First time OverClocker needs help!

    Sorry....... wish there was a delete button.... :o
  39. M

    First time OverClocker needs help!

    Opps......
  40. M

    First time OverClocker needs help!

    I made the next step. Up to 928 and all is well.... Still have the same questions to the above post.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |