Search results

  1. S

    Mouse pad/mat with adhesive - anyone try one before?

    hmm...I have some teflon tape - i could try covering the bottom of the mouse. i'll report back...thanks for all the suggestions!
  2. S

    Mouse pad/mat with adhesive - anyone try one before?

    I don't use a mousepad with my optical mouse, but my dark-colored desk is getting "chaved" and the surface is scratched up pretty badly. Has anyone tried something like CS Hyde's C4 classic? http://www.cshyde.com/c4web/C4Classic.htm or anything similar to that ? do they work well? Do...
  3. S

    How do I connect my computer to my LCD TV and get full screen scaling?

    The whole reason i'm connecting the TV to the computer is to watch movies on my TV instead of the 19" LCD. When i extend half my windows could swap over to the TV side when i work on the computer. Besides, i already tried that and i couldn't get the picture to get any bigger than it already is...
  4. S

    Problems with my new computer.

    return the creative junk and get yourself a nice firewire or USB m-audio box M-Audio Products
  5. S

    How do I connect my computer to my LCD TV and get full screen scaling?

    I have a Sharp 45" LCD Aquos that i connected to my Gigabyte GeForce 7300GT graphics card using component cables. I also have a 19" dell connected to the same card via DVI. I used Nvidia's control panel to set the displays to Dual View Cloning and I get acceptable picture quality on the 45" LCD...
  6. S

    Using eSATA in RAID 1 configuration?

    I have a 250GB boot drive and a 500GB storage/music drive. Would it be feasable to get a external 500GB drive and set up a RAID 1 configuration to mirror my internal storage/music drive using eSATA? Has anyone done this? Or am I better of doing internal RAID? I have a ASUS P5B...
  7. S

    Turning on SATA support on already running system

    I have a Albatron KX18D Pro II mobo and till now, just used the PATA hard disks with SATA disabled. I'm going to start upgrading the system over the next 6 months (due to lack of $-flow) and wanted to upgrade my SLAVE hard drives to larger capacities first (a few 500GB'ers would do) - SATA...
  8. S

    Turning on SATA support on already running system

    nobody has an idea?
  9. S

    Have an Athlon XP2500+ with DDR1 PC 3200

    i would assume you could use something like this: http://www.satacard.com/sata-ii-pci.html i've used the PATA ones before, but never the SATA ones.
  10. S

    Turning on SATA support on already running system

    I have a Albatron KX18D Pro II mobo and till now, just used the PATA hard disks with SATA disabled. I'm going to start upgrading the system over the next 6 months (due to lack of $-flow) and wanted to upgrade my SLAVE hard drives to larger capacities first (a few 500GB'ers would do) - SATA...
  11. S

    DVI not working?

    any more ideas?
  12. S

    DVI not working?

    the cable that came with the LCD is DVI-D. I assume that the vid card supports both DVI-A and DVD-D
  13. S

    DVI not working?

    does anyone have any ideas?
  14. S

    DVI not working?

    i just hooked up my LCD to my computer but i can't get the DVI connection to work. The regular VGA works, but when i switch to DVI (both in the display properties and on the LCD itself), the screen just goes blank. When i hook both connections up at the same time (VGA and DVI), the display...
  15. S

    Hard Drive Failure

    I can boot into windows fine, it's a slave drive that's corrupted. Isn't knoppix just a bootable OS?
  16. S

    Hard Drive Failure

    well, one of my HDs crashed and it really SUCKS!! The disk wasn't accessible in Windows XP, which showed it as "unformatted". I downloaded a copy of r-studio (http://www.data-recovery-software.net) and did a disk scan. which was able to find all my files on the partition. I'm assuming...
  17. S

    Need RAM help - faulty ram???

    OK, i tested it with no OC and both sticks seem to be fine. Are these errors occuring due to the actual RAM that's not behaving nicely or is it the CPU itself? I've been running at 3200+ for over a year now but the BSODs only started showing up a few months ago and have become progressively...
  18. S

    Need RAM help - faulty ram???

    OK, i'm going insane here. I need to know what to do next here.... My machine has been running test for the past several days now, since i've been getting random BSODs lately. I use the Windows Memory Diagnostic utility for this. I have two sticks of Buffalo 512 DDR3200. I was running my...
  19. S

    Capture Card sound to external soundcard?

    nevermind, solved the problem myself.
  20. S

    Capture Card sound to external soundcard?

    any suggestions on this?
  21. S

    Capture Card sound to external soundcard?

    I have the LeadTek WinFast 2000XP Expert card and in the instructions it says to connect the audio-out (which is a standard flat 4-pin mobo audio connector) to the soundcards audio-in. However, i'm using an external firewire soundcard. Is there any other way to convert the flat 4-pin connector...
  22. S

    Best DVD-Burner out now???

    second that
  23. S

    Pass Sandra & Memtest, but fail Prime95?

    UPDATE: I let prime95 rip through the night using small FFTs Torture Test and everything seems fine (after 9 hours). Should I consider the system stable now ? I don't really know why it failed the first few times though. Maybe i was using a different prime95 test (medium FFTs or the blend...
  24. S

    Pass Sandra & Memtest, but fail Prime95?

    well, I just ran Prime95 for abour 3 hours and it went fine :confused: The funny part - i haven't changed anything! Still running at 200 FSB I will have to let prime run overnight and see if there are any problems tomorrow morning...I'll post back
  25. S

    Pass Sandra & Memtest, but fail Prime95?

    what type of memory settings do you recommend?
  26. S

    Pass Sandra & Memtest, but fail Prime95?

    I built my new rig as follows: + Albatron KX18D PRO II nForce2 SPP + AMD 2500/333 ATHLON XP BARTON + Buffalo 512 PC3200 DD4333-512 + ALBATRON GeForce 128MB FX5200EP + Thermalright SLK-900A I overclocked my FSB only to 200MHz, but left everything else at default. I'm running a...
  27. S

    New Computer Problems

    check your video card: take it out and reseat it properly.
  28. S

    Upgrading system & OS at the same time

    do you burn those images on CD/DVD ? what program do you use?
  29. S

    Upgrading system & OS at the same time

    I'll take your advise and do a clean install...damn you :P @LegionX: do you think I should burn a backup on DVD? And should I install standart programs like Office before I do the backup? I'm assuming you're talking about basically making an "image" of my HD for recovery purposes, right?
  30. S

    Upgrading system & OS at the same time

    i agree with you...this would be my first "upgrade" ever, although I've clean-installed win2k hundreds of times. the only reason I "considered" upgrading is because of all the programs that I would need to reinstall. Is upgrading really so bad?
  31. S

    Upgrading system & OS at the same time

    because it would take forever to reinstall all the programs that I have installed on my current sys. And just thinking about looking for all the CDs and installation files gives me nightmares.
  32. S

    Windows Login Question

    in win2k, go to Administrative Tools > Local Security Settings. In the folder Local Policies > Security Options, you can enable the following: "Do not display last user name in logon screen" which will display a blank username field.
  33. S

    Upgrading system & OS at the same time

    I want to move my current win2k installation to a new rig and upgrade to winxp pro at the same time. What's the best way to do this? Should I complete the move to the new rig and let win2k repair itself (to recognize the new hardware configuration) and then upgrade to winxp ? Or should I drop...
  34. S

    Need Advice on a new rig

    I want to get some rounded cables from svc.com, since they're only a few bucks. what lenght should I Get for the Evercase? 24" or 36" ??
  35. S

    Need Advice on a new rig

    I did check, but i chose the lite-on for a little $ more since it has 8MB buffer and 4x write on almost all media. What other video card do you recommend?
  36. S

    Need Advice on a new rig

    actually, newegg does have Buffalo 512MB chips available at 3200. however, they are infenion chips and not winbond...i guess they should do, right?? and they are a tad cheaper than the crucial sticks.
  37. S

    Need Advice on a new rig

    Thanks for all the info - really awesome! here is what I'm imagining right now: for a total of $607.97 from Newegg (w/o tax & shipping) then add another Maxtor L01P160 160GB HD from staples for $100, CPU fan from svc.com for another $20, and a case fan for about $10 - $20 and I should be set...
  38. S

    Need Advice on a new rig

    is 300W going to be enough for a 2500+ barton with DVD / CD and 2 HDs ??
  39. S

    Need Advice on a new rig

    @Johnbear007: for music editing....i edit 2-3 hour music sets which are sometimes a few gigs (and I don't use a mac) so the reason for the RAM (i have 1 gig right now in my old rig) is that i actually do need it. you're right about the hq parts that I selected vs. HP. I'm starting to see the...
  40. S

    Need Advice on a new rig

    thanks ionizer...plenty of excellent info!! if i get the barton 2500 ... newegg is listing that as a 333 fsb. can i oc it to 400 fsb without a problem? and should i be able to use the fan that comes in the retail box or go for something else (like a volcano or so)?
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |