Sillious:
You are having the same problem lots of other P4C800 owners are having. I am having a similiar problem. Mine started when I tried to upgrade my P4C800 Deluxe to a new processor. Kept getting the CPU Failed message. Put my old processor back in and same thing. I tried multiple...
My currrent system has a FastTrack TX2000 controller. I just upgraded my motherboard to a Soyo Dragon Ultra and the TX2000 keeps failing out saying it can't find the proper interrupts. I've disabled everything on the motherboard (USB, IDE, RAID, SERIAL, PARAL) just to see if the TX2000 would...
Let me see if I can clarify this.
I had three drives on my FasTrak RAID card. Two 30 gig drives were set up in tandem and working, and I had a 40 gig just setting on channel two, not part of the RAID. One of the 30s died (clicks constantly) and won't boot. So, I removed the 40 gig, with the...
I "HAD" a RAID system with three hard drives. Two 30 gig drives (1+0) set up on channel 1. I had a spare 40 gig I set up on channel 2 showing up as a slave. This drive was not part of the array (or so I thought). Well, one of the Maxtors died (less than a year old). I thought, "No problem...
I had two of these Cliks at one time. Great for small storage and MP3s. But it wouldn't work with my single slot PCCARD adapter for the IPAQ. I sent Iomega an email and they claimed it was Compaq's fault for not properly supporting the PCCARD interface. Anyway, it wouldn't work. I moved on...
Kewl Information. I'm moving (career change) and I have to give up my wired house for an unwired house. So I have to decide on a wireless solution. Of course, Anandtech was my first stop for information, and as usual, I found it!
Thanks
Thanks for the post. Ordered one today for a new box. Can't believe you can get a 16X burner now for what a standard CD-ROM cost just a little while ago. With taxes, mine came to about $34.00. Good deal.
I found this a funny thread. I "used" to be into Honda long ago (4 civics and 2 accords). My wife liked them then. I personally like Ford myself. She gave up her Honda's and can't stand Japanese cars now, but my oldest son is really into them. I put a whole short block in my Ford T-bird...
Well, their site says this works with iPAQ's so I'm assuming they are using the PCMCIA adapter. I have one on mine. But some things don't work too hot with it (Iomega Cliks=NOGO). This may be what I need for pictures and music.
I just read the review on the MSI Board. I'll Pass on this one too! I've got my memory already, and it's not registered. So, I'm still waiting. Anybody else here taken the plunge on the Asus?
LMAO!
This is the funniest thing I've ready in a long time! Thank you DocSmarts for some great laughs.
As one of the poster put it: "It wasn't like it was your nuts"
May I suggest using that part of your anatomy next time as the heat sink! I recommend a BIG 120MM high speed fan to make the...
HEY, how did you sneak in my house and take a picture of my computer desk! JPEG 5 looks just like my desk! :)
Great Pics. Might see if I can get one of these for my son.
Okay, I tried to join a few days ago. Three computers here in this house doing nothing most of the day. I followed the instructions and could absolutely no way get registered. Maybe I'm just STUPID! Got pi$$ed and quit. So if someone would like to tell me how this works, I have three...
I got in on those Panaflow 80mm fans a few weeks ago. They are quiet, but I'm not too happy with the amount of air they move around. I've added three to my case, and I've noticed a general rise in temperatures as reported by my DigitalDoc. I'm going back to the Pabst I have for case cooling...
I just finished a marathon reading of the threads on the ASUS board over at 2CPU. I think I'm gonna take some time on the side lines. I've just started my new case mod anyway. I didn't like some of the trials over there. But it does sound like it is working.
Thanks HarryT for your insights. I'm...
I'm still waiting. Got the parts flowing in, and I'm gonna need that Mobo pretty soon. But I want to see some HEAD-2-HEADs first.
As for the SoundBlaster problems, I remember reading that you had to be careful about what PCI slot you stuck it into. Seems you need to know what PCI slots are...
Most excellent! DUDE, YOU'RE GETTING A DUALLY!
(that's what that morron in the Dell commerical should have said!)
I can't wait to read the update! I was almost in there with you. I've got the memory, and the money for the processors and MOBO, but since I haven't yet decided on a MOBO, I'm...
I think StorageReview is going under? Think I read that someplace on the web.
I was doing some video (amature stuff) with Firewire on my Sony DV. I started with SCSI (non-raid LVD) and it was fine. But with the prices of IDE coming down, I also tried a pair to 40 gig maxtors in RAID0, and...
I was flipping through the review of the MSI Dually HERE (as mentioned earlier) and I didn't see the holes in the MOBO for the larger coolers either. I wonder if we will not see them on any board? Does anyone know if the Tyan board will have these? I haven't seen anything on the new Tyan or the...
Anyone have a Sam's Club link to this product on their site? I've tried seaching for it at Sam's but no luck. My local Staples have been very good to me about price matching every web page I print out and carry in (of course, I haven't tried any of those flaky sites). But I believe they would...
New review posted HERE of the ASUS board. This one does talk about the USB problem. So head over that way and take a peak!
I'm tempted after reading, but I think I'll wait to see one or two of the other boards first.
I got two of these 16x HiVal's from OM when they substitued them for the Iomega's they didn't have on hand. They come with Super-Link, and Nero 5.5 and one rewriteable CD. Mine has been burning flawlessly with no problem. Don't have any idea who makes these, but as I recall, HiVal itself went...
TBC:
Actually, I wish MOBO companies would stick 256mb on their boards (of whatever the board needs). That would help stabilize the price and I'm sure they would get a better deal for it that than I can. I don't care if I can't overclock it to some ungodly number just for the bragging rights...
I have found my first review of the MSI K7D Master board HERE. Although this reveiwer didn't discuss the overclockability of this product, MSI in the past, has had some great options available.
I still haven't made up my mind yet which to purchase and plan to wait a while longer to see...
I used this tool (actually a Craftsman) at my Dad's house a few weeks ago to cut some drywall. Question: Do these come with any metal bits? I don't want to use cutting wheels as my Dremel has those, but if this came with a metal cutting bit, it would be great for cutting computer cases. I'm...
Too bad more companies don't follow this lead. I just returned from 4 years of overseas duty in Germany, Bosnia and Kosovo. Only a handful of companies send to APO/FPO addresses. And most of them want extra money because they have to ship with USPS and fill out a customs label. What they...
I'm almost ready to launch into building this system, but it looks like the majority of the folks listing "760MPX" mobos on the net will not have stock until mid January. I did find the Tyan at Gateway for about $185, but after reading THIS article on Anandtech.com, I have decided that I am...
I agree with Loopy. Can't be the CPU, and can't really be the MOBO. Sounds like an early hang. I usually start a MOBO the first time with just one DIMM (make sure you have the right kind for your MOBO), the Video Card and a floppy. If it boots, start adding your other cards/drives. I have a...
This web site does have some good looking Fry's Sale pages, but they are ads that ran to December 20. I wonder when they will post the next ads, and all the addresses do appear to be SoCal.
I was at Lowe's yesterday here in Killeen, Texas buying some small fix-it stuff for the house. Lowes asked me if I was Active Duty or Retired. I produced my ID Card and received a 10% discount. When I asked if this was on anything in Lowes, the cashier replied that it was. She didin't know...
The Seaworld at San Antonio has been having this deal. I didn't know about the Disney properties. I'm active duty heading to Orlando in the spring. Does anyone know the range of dates for this?
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.