what type of memory are you using.....could be what is holding it back.....
and i have a question of my own.....i have two sticks of 512 geil memory cas 2.5 3 3 6.....i have an abit nfs and want to do dual channel with 2gigs by adding a stick of 1gig ....the problem is that most 1 gigs...
that is the problem....i cant seem to loosen the timings to cas 3 at present on the cas 2.5...system wont boot....but at present it will run at 2 3 3 7(lower timing)
i have two sticks of 512 geil memory cas 2.5 3 3 6.....i have an abit nfs and want to do dual channel with 2gigs by adding a stick of 1gig ....the problem is that most 1 gigs are cas 3 ....and the 2.5 cas gigs are few or way more expensive...i was wondering would the cas 3 gig work... i have...
i have two sticks of 512 geil memory cas 2.5 3 3 6.....i have an abit nfs and want to do dual channel with 2gigs by adding a stick of 1gig ....the problem is that most 1 gigs are cas 3 ....and the 2.5 cas gigs are few or way more expensive...i was wondering would the cas 3 gig work... i have...
is there a way to play ps2 games on a pc? without the gaming system... seems like you should have more power to play them on a pc.. is there an emulator or something...? thanks for the help in advance
but would i have to disable the onboard sound?.....it seems that i can only use either or....is there a way to get both to work at the same time? or would i need a different type of sound card for them to work together?
i just tried backing up a game so i can run it off the back up instead of the original and the siystem installed fine from the back ups but wouldnt run from the back up ...is there something i need to do? im using nero 6 to make the back up..thanks for the help and advise in advance.
i have an abit nf7-s and wanted to put an audigy in.... i had an old sound blaster live that i installed but it would only work if i disabled the onboard sound...when i first put it in they both worked but on reboot only the sound card worked.....i have a card reader with front audio connectors...
want to know what the original multiplier of a 25oo mobile is since it suppose to have a 266 bus...but run at 2500 speeds..1.8ghz.. but to obtain that speed it would have to use a multiplier of 13.5..am i correct....trying to lower temps on system through different settings and would get better...
whoooo i set it back to 11X200 for a little while and then shut it off while i went shopping...my cpu temps were 27c idle(again at 11x200)...maybe i need to let it cool down some and let the compound set in(by shutting system down at nite)....guess i will be cranking it back up to 2.6 in a...
thanks appreciate the help..was worried about my temps..i keep giving it voltage to overclock so its gets hotter it seems....and hoping that the new application of thermal compound just needed to settle in and that temps will go down.... i have it at 13x200....as soon as i figure out how to up...
i have my system overclocked to 2.6 now but my temps idle are at 50c. is this ok about 55c load...i just in stalled with artic ceramique a day ago...do i need to let it cure some more..or burn in time on the compound? are these temps safe or ok?
im only using 4 fans plus the cpu fan.. thanks...
so if i lapp the heatsink it will not be flat..even if i use a flat surface to lap it i had planned on using a sheet of glass to lap it on figuring that it would be a relatively flat surface to avoid the sink becoming uneven.....
in using the glass surface ...you still reccomend leaving the...
thanks.....guess i will have to either send the new powmax back and get something else...thanks for the input....guess my real concern was having enough power to overclock and support my system.... so from what i gathered a 350w would be good enough to supply my system and overclock?
also i...
i just got my artic thermal compound(ceramice).... and i noticed in a reveiw it says it needs about 12hrs of cure time to set in ...is the cure time the time the paste needs to dry set before running system or cure time before you overclock it or run system at all?
my temps are 40c now...should...
uggh..i needed a psu and was ordering multi parts and to lower shipping just added the above power supply in link...maybe i might get lucky with the 480 version of powmax.... but if not i will just send it back and get one of the suggested ones.....
but will 400w or the 480 be suffiecent to run...
i have a 400w power supply made by powmax..... i was thinking of getting another because my rails are all over the place when i overclock...2.4 is ok and 2.5 pretty stable but with rails all over....2.6 it hits windows and the reboots but im sure i can get there and beyond... my system spec are...
i would like to know the same thing....i have a soyo 6ba+VI and it was like the 440 overclocking marvel...but know i dont hear nothing about soyo...what's up? have the gone to crap? or was a one hit wonder?
i have the nf7-s board .. it came with a ide to sata adaptor that needs to have a molex and floppy power connector attached to run the ide drive. my question is ... do i need to hook up the floppy connector if i get a real sata drive or can i just use the sata power convertor?
and with using a...
if you overclock say a 2500+ to 3200+ speed...will it show up as a 3200+ or a 2500+ on posting of the system..and if you exceed the 3200+ speed what will it post at? thank for the help/info in advance.
i know celeron is some what crap....but i just want to buy a 40 dollar cpu(celeron 1.3 or one that reaches 1ghz) and throw it into the board i have with out any complications...and need to know if a fc-pga or fc-pga2 would fit on my converter and work with my board... i am building an amd system...
would i have to get a new converter? it would cost more to buy a new cpu, mb, and ram....i just want to get this system up and running so that i will have a semi decent back up if other system fails....been caught with my pants down too many times...usually give old system to a friend or family...
i have a soyo 6ba+IV board that died but now i have the bios chip it needed to come back to life....it has a celeron processor(400mhz) and a slot 1 to 370 coverter......can i upgrade to a celeron 1.3 or at least a celeron of 1mhz with the converter? can i use a fc-pga chip....and even better...
thanks all really appreciate the help....i have ordered a new bios chip after trying all suggestions..nothing worked... lolol guess i have to spend the 25 bucks for a replacement...oh well ...once again thanks for the assistance really appreciate it.
i cant get to windows..when i boot system i get bios check sum error....i can boot from a floppy...i have tried to reflash the bois but it keeps telling me "unknown flash type". i can boot a floppy but bios will not open or go to hd...
i have a soyo board that when i boot says " bios rom checksum error" is there a way to reflash the bios without sending the chip back to the manufacture? i have award bios... and what is an autoexcut.bat file and how do i find it or make one? thanks for the help...
i have a soyo board that when i boot says " bios rom checksum error" is there a way to reflash the bios without sending the chip back to the manufacture? i have award bios... and what is an autoexcut.bat file and how do i find it or make one? thanks for the help...
hahaha thanks isman .... that is almost how i built my last system with rebates and freebies...miss those days.. think i may go with a biostar board..... just dont know if i should go nivida or kt400....the kt 400 is cheaper..and the reason im going with an all in one board is because of after...
isman i dont know what to say.... i really appreciate you taking the time to enlighten me....where would be a good place to get a cheap ide controller card?.... oh yeah .....what do you think of choices of dvd rw and cd rw drives....im thinking of either msi, lite on, or NU? the nu is...
ahh i got ya on the sata....basically its just more for those who sorta..wax the cpu....no real gain...but makes system look better.... thanks isman really appreciate the update..... im still looking for a stable board... i think i can do with out the firewire...but would be nice...sata...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.