built in raid turned off. Add on card being used because the P4PE only supports 1 parallel and 1 serial raid channels or 2 serial and serial hard drives are not out yet so I bought the parallel add in card and disabled the onboard raid until serial ata drives hit the market. The card i'm using...
HI,
Please Help! I have used the latest sandra software to benchmark my dual western digital 7200 rpm 80GB special edition hard drives on raid 0 with a PCI dual ata raid 100 controller by highpoint and my benchmark is slower than a single hard drive! What the hell is going on ? I notice that...
It's actually not a repost because 1) the deal from before was at BUY.COM, not AMAZON. 2) that deal was dead at the end of august, 3) the price at amazon is cheaper anyway!
Happy birthday to come!
Greg
IMHO THIS IS AN EXTREMELY HOT DEAL AT Amazon For THIS 5.1 CARD. EVEN NEWEGG CHARGES MUCH MORE FOR AN OEM!
LINK: http://www.amazon.com/exec/obidos/tg/detail/-/B000063WQ0/ref=pd_hp_hd_ts_e3//002-7755262-0744845?v=glance
ADD Code for $5.00 OFF $35.00 that is floating around MAKING THE TOTAL $...
You can do it that way but I do not think that They wouldhonor the coupon code for $20 off because it is on clearance merchandise. Ordering it over the website hits you up for $5 more but you are guaranteed the $20 off with my method. Just an FYI before all of you head over to the store just to...
Cloudmog, There is no limit in their computer system that prohibits you from ordering using the same code more than once. In other words, their online database does not stop you from using the code a few times by the same customer. The charges will be for the full merchandise and then an...
Yes that is correct, everyone who orders will see a charge for the clearance price of the merchandise, and then a $20 crdeit immediately below that on their statement. Anyone who had internet account access will see this credit long before you get your statement. The two billing cycles is...
Hi fellow anandtechers. It's my privledge to due my part in these hot deal forums as I have saved tons of money from all the hot deal posts from thoughtful members so here we go:
For those of you who shop Eddiebauer.com, you normally would not be able to use the "currentcodes" that are out...
Here's some help:
Go to a store named "PCI" in manhatten, on or around 34th street and 6th ave. You can ask information for the exact address,
When you get there, tell them 'Johnny" rererred you to them and he said you can get some good deals on computer components there.
Ihave some...
I would call themup and tell them you want to report your current card as lost(this is what you have to do even if it is not lost) and that way, they will cancel that # and suspend all future activity on it. They will then issue you a new card # and send you a new card in about 4-5 days. I have...
Please someone help me!
I had exhausted all options and have been spending hours trying to figure out my problem. I need some expertise!
My Problem: I have a new setup, Soyo Dragon, 2 Western Digital 7200 rpm ata/100 Hard drives set up on a raid 0 array, each on thier respective Raid...
Please someone help me!
I had exhausted all options and have been spending hours trying to figure out my problem. I need some expertise!
My Problem: I have a new setup, Soyo Dragon, 2 Western Digital 7200 rpm ata/100 Hard drives set up on a raid 0 array, each on thier respective Raid...
Hey luk,
Right after you add the item you want to buy into your shoppiing cart and you see the 20% discount come off the total, on the same page, there is a little icon that you click on the right hand side of the page that says"add coupon" A little box will pop up in the left hand...
Hi,
Yes actually,
You need to change the CMOS Lithium Battery on the motherboard. Usually this is the culprit when the time eother changes forward or backwards for no apparent reason. The Battery looks like a quarter and sits right nest to the bios on the MB. Hope this helps.
Greg
I need Help!
Ok this is what happens. I have everything hooked up properly with a cdrom drive on the regular primary ide controller and a cdrw drive on the reglar secondary ide controller. I'm able to access the raid setup by hitting Control M when booting up and I configure the array to stripe...
Ok this is what happens. I have everything hooked up properly with a cdrom drive on the regular primary ide controller and a cdrw drive on the reglar secondary ide controller. I'm able to access the raid setup by hitting Control M when booting up and I configure the array to stripe the one...
Hi Guys,
I want to thank you for your help in setting up my Pc, but I still have the same problem and I thought i'd see if you have any other suggestions. Your assumptions are indeed correct in that I cannot format the hard drive when it is on either of the controllers, however I can...
Hey D,
Thank you very much for your advice. The only thing is that I do not have a copy of the Win2000 boot disks I need to do the formatting! Is there a website that you can go to that I can get them perhaps?. I received a copy of Win2000 pro. from a friend at work but he's on vacation all...
Hi everyone,
Mabye there is help for me. I currently put together an Athlon 1.2GHZ t-bird system using an enlight 7237 300watt case, Iwill kk266r MB, 256MB Crucial Ram cl-2, Maxtor 30Gb dioamondmax plus ata 100/7200 RPM Hard Drive, Aopen 12x10x32x CDRW and Windows 2000.
My problem tis that...
Hi everyone,
Mabye there is help for me. I currently put together an Athlon 1.2GHZ t-bird system using an enlight 7237 300watt case, Iwill kk266r MB, 256MB Crucial Ram cl-2, Maxtor 30Gb dioamondmax plus ata 100/7200 RPM Hard Drive, Aopen 12x10x32x CDRW and Windows 2000.
My problem tis that...
Hi Bud,
I just built a system with the same exact MB and and 1.2ghz t-bird overclocked to 1.45!
In order to access the FSB that you are looking for over 132, you need to switch the jumper on the MB from the 100mhz FSB setting that it comes with from the factory to the 133mhz FSB. The jumper...
I wanted to mention also that no matter what I set the cpu voltage to, the hardware monitor that came with the motherboard always say 1.84v....Is that normal?
Thanks again
Thank you everyone for all of your help and tips.
Well, considering that I must have received one of the new Axia core t-birds, I guess I can't complain about getting 1.32ghz. I have tried lowering the fsb and boosting the multiplier but the same result. It maxes out at 1.3ghz. I think I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.