Search results

  1. H

    Gigabyte - 970A-UD3 MB / Do I need to install the drivers?

    Thanks for the extra detail on this. You are right about SSD's being fast. I can't believe how quick my system boots up, and how fast MS Word, Excell, etc... open up.
  2. H

    Gigabyte - 970A-UD3 MB / Do I need to install the drivers?

    The Beta version? Is it stable?
  3. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    I've not moved the NB at all yet, so it must still be at 2000mhz. This is the next thing that I will try. QUESTION 1: How far would you guess I could reasonably push it above 2400? I ran a 9.5 hour MemTest at Optimized Defaults, with no issues. I will plan to run MemTest and Prime95...
  4. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    Earlier you suggested a NB setting of 2400mhz. Should I back off on the multiplier, or just leave it at 19? Also, what other stress test should I use to verify stability? I did run a rather long MemTest and found no issues with RAM.
  5. H

    Phenom II X4 965 Core Voltage Question

    OK, I have a confirmed Prime95 test at 3.8GHz. FFT's - Small Duration of Test - 16 Hours Errors - None System Monitor - HWMonitor OC Type - Multiplier Only (19x200 = 3800mhz) CPU Core Voltage Setting - 1.5v (+.25v Over Normal of 1.475v) LLC Setting - Regular Min Core Voltage - 1.152v...
  6. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    OK, I have a confirmed Prime95 test at 3.8GHz. FFT's - Small Duration of Test - 16 Hours Errors - None System Monitor - HWMonitor OC Type - Multiplier Only (19x200 = 3800mhz) CPU Core Voltage Setting - 1.5v (+.25v Over Normal of 1.475v) LLC Setting - Regular Min Core Voltage -...
  7. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    I would actually be happy with 3.8ghz. Heck I am happy with 3.4, but want to get the most out of it that makes sence. BTW it is a C3 stepping, lower voltage.
  8. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    Thanks, that is my plan. There is a wealth of information on what are good NB, HT, etc.... settings. One place shared these (Let me know what you think): CPU Freq: 225 Multi: 18 (4050mhz) NB Multi: 12 (2700mhz) HT Multi: 9 (2025mhz) CPU-VID Volts: 1.475 CPU-nb Volts: 1.275
  9. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    Oh man........... My Bad.......... The max out was 57c, not 37c I have corrected that. I believe that the temps are holding at just a bit lower at 1.5v than they did at 1.475 because I have the LLC set ar regular, and that seems to hold the voltage a lot closer to the set amount. Still...
  10. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    Well, I am now endeavoring to OC this CPU, and got it to run Prime95 small FFT'sfor a couple of hours at 3.6ghz at 1.4v, so I went up to 3.8ghz, and had to go to 1.475v (Normal Voltage on my board) to get it stable. I ran Prime95 for a couple of hours last night, and the temps locked in at...
  11. H

    Confused: How do we moniter our AMD CPU's?

    That is a very good question, and one that I was asking myself just yesterday. No 1 – I am not an Intel fan, although I would consider there chips, but I have always preferred to go with AMD, more for price, and philosophical reasons I guess. No 2 - I started with the plan of...
  12. H

    Confused: How do we moniter our AMD CPU's?

    multiple posts
  13. H

    Confused: How do we moniter our AMD CPU's?

    multiple posts
  14. H

    Gigabyte - 970A-UD3 MB / Do I need to install the drivers?

    Thanks for the Info. Can you also check your BIOS version as well? I am very curious to see what it says. Again, mine says AMD BIOS ver 7.0.3 (Unlike any of the version nos at Gig)
  15. H

    Gigabyte - 970A-UD3 MB / Do I need to install the drivers?

    Thanks for the clarification. Which version of the board do you have? I ahve version 1.1 Also, when I see the BIOS version at it boots up, it says AMC BIOS version 7.0.3. pr 3.0.7, I can't remember which. When I go to Gigabyte to check for BIOS updates, they have no revisions even...
  16. H

    Confused: How do we moniter our AMD CPU's?

    My cooler is the Noctua NH-UNB SE2 http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1 My Ram is the G.Skill Ares Orange 1600 8gb (2x4gb) Kit.
  17. H

    Confused: How do we moniter our AMD CPU's?

    This is the kind of information that has had me a little of track. Here is a direct quote from one of Anandtechs own articals: http://www.anandtech.com/show/2821 The power consumption tests utilize an watts up? Pro meter and we capture total power consumption for the system at the wall...
  18. H

    Confused: How do we moniter our AMD CPU's?

    My apologies, but I did search, a lot, but never saw a mintion of that important detail. Not here nor anywhere else. I have seen a lot of recommended monitors, but never did I read a single thing about AMD not reporting actual temps. What I did not think to do was look for FAQ's, as shared...
  19. H

    Confused: How do we moniter our AMD CPU's?

    I downloaded the latest just days ago, and HWMonitor is showing 4 core temps, even though AMD CPU's, supposedly only have one, off die, sensor. All core temps are the same and static relative to each other, indicating that they are coming from the same sensor.
  20. H

    Phenom II X4 965 Core Voltage Question

    I believe that HWMonitor is actually reading the proper voltage: IDLE - 1.008 Full Load - 1.344 Peak - 1.344 Now, the next question is this: Is 1.08 too low for an IDLE voltage?
  21. H

    Confused: How do we moniter our AMD CPU's?

    That thread was about getting monitors to work, and YES I did do the search that you suggested, and read those threads, but all of that still left me with more questions, and I find that a new wrinkle in a thread, many times does not get answered in that thread. For example, GaiaHunte's...
  22. H

    Confused: How do we moniter our AMD CPU's?

    But do you know it to be accurate? I have read in more than one place, and here as well, that it can read low, as much as 10 degrees C. _________________________ I have tried Real Temp, highly recommended, but it simply says my CPU is not supported and stops. _________________________ I...
  23. H

    Confused: How do we moniter our AMD CPU's?

    Double Post
  24. H

    Confused: How do we moniter our AMD CPU's?

    After a lot of searching, here and elsewhere, and getting lots of suggestions on the best CPU monitors for temps and voltage, I have come to understand that monitoring core temp for an AMD CPU is not actually available. Can you guys help me out here with how to test my Phenom II and monitor...
  25. H

    HWmonitor only displaying 3 core temps and they look wrong

    Then what about all the threads regarding Stress Testing, and monitoring voltage and temp?
  26. H

    Phenom II X4 965 Core Voltage Question

    My board does have LLC, and the settings are Regular, Extreme, Auto. I have it set to Regular, because, from all my reading, Regular seems to be the closest thing to disabled.
  27. H

    HWmonitor only displaying 3 core temps and they look wrong

    Will do, thanks. But then, how do you monitor temps with an AMD CPU?
  28. H

    HWmonitor only displaying 3 core temps and they look wrong

    Please forgive me for being unaware of the 1 vs 4 core temp sensor in AMD processors. I was only going by what I saw in HWMinitor, which has been recommended many times and in many places. It must just have the place holders for the 4 cores, but then read the single temp sensor, and then...
  29. H

    HWmonitor only displaying 3 core temps and they look wrong

    A couple of posts back I was corrected, and then realized that I was not looking down far enough in HWMonitor to find the Core Temps. It actually does show separate temps for each of the 4 cores, and they very slightly over time, so they must be being read individually.
  30. H

    HWmonitor only displaying 3 core temps and they look wrong

    OK, I have lowered the core voltage to 1.35, by setting a -.125 below 1.475, and have set the LLC to regular (Choices are Extreem, Regular, Auto) I have performed several, approx 30 minute, runs of Prime 95 Small FFT's, and have been seeing the following results: HWMonitor shows the core...
  31. H

    Phenom II X4 965 Core Voltage Question

    I don't remember seeing LLC options, but I will check tonight. Thanks for the suggestion.
  32. H

    Phenom II X4 965 Core Voltage Question

    I tried HWMonitor again, and it read 1.408 Core Voltage under load, and again that is with a Core Voltage setting of 1.35 in BIOS. Again, it was reading 1.475 under load before. I was not able to run it long enough to see if the peak temps are siginficantly lower or not.
  33. H

    Phenom II X4 965 Core Voltage Question

    OK, I went in and set the voltages from auto to manual, and then set the core voltage from "Normal" which is 1.475 (must be max as that is the max that it ever went to) to 1.35v. I ran Core Temp and the started Prime 95 again, and the voltage went straight up to 1.475 again. I stopped...
  34. H

    EDITED - Question Re: Prime 95 Error Running Stock settings

    I am not ignoring the previous posts but I promised to post back after running another proper Prime 95 test, and I just ran Prime95 for 22 hours with no errors. The temps got up to 58c, but no issues.
  35. H

    Phenom II X4 965 Core Voltage Question

    That settles it. 1.35v, to start, it is then. I will post back on how it goes. Thanks,
  36. H

    HWmonitor only displaying 3 core temps and they look wrong

    That is great advice, and I am happy to hear that "Real Temp" is an accurate monitor, as and I have already downloaded and installed Real Temp. I like it a lot, and am currently using it to monitor a Prime95 test as I type this, on another pc of course. Thanks, and I appreciate the...
  37. H

    Phenom II X4 965 Core Voltage Question

    My BIOS is set for at Optimized Defaults, except for SATA, and AHCI. CPU controls such as core voltage are al set to AUTO. I will go in and set them to manual and set the CV to 1.35 and see what happens. If all is stable, after a few hours of Prime95, I will try 1.3v. As far as my temps...
  38. H

    HWmonitor only displaying 3 core temps and they look wrong

    So it is not showing cor temps at all then. I wonder why? Even after what I know to be a clean install into a clean image of my system. I think I will download a fresh copy and try that.
  39. H

    Phenom II X4 965 Core Voltage Question

    Yes, I believe that it is my motherboard, since all the controlls are set to AUTO, and I believe that allows the board to send as much voltage as the CPU wants. I went back and read my original post and see that I was not as clear as I might have been about the real question. QUESTION...
  40. H

    HWmonitor only displaying 3 core temps and they look wrong

    _____________________ I reimaged my system drive to an image that had no monitoring installed, ever so that there would be absolutely no chance of bleed thru from an earlier install. I then reinstalled HWMonitor, and it is still showing only the three cores just as listed above. I...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |