Search results

E
Radeon LE Overclocking

As for how to enable HyperZ...not only can you just do a search for it, but I'll post the code here. Copy the following into notepad and save it as something like "radeon.reg" on your desktop and double-click it after you save it: REGEDIT4 [HKEY_LOCAL_MACHINE\Software\ATI...
- EvilPig
- Post #18
- Mar 5, 2001
- Forum: CPUs and Overclocking
E
Radeon LE Overclocking

pay: I don't play cs very often, and i have yet to get some fps averages in q3a, but here's some numbers from UnrealTournament Direct3D drivers after playing CTF-Face for 10 minutes in each mode (I used all the weapons and even killed myself a few times with the redeemer to test the close-up...
- EvilPig
- Post #17
- Mar 5, 2001
- Forum: CPUs and Overclocking
E
Radeon LE Overclocking

Oh one more: I got 3166 3DMarks running the Standard test...but it would be higher if my processor could handle my radeon.
- EvilPig
- Post #11
- Mar 4, 2001
- Forum: CPUs and Overclocking
E
Radeon LE Overclocking

kimcheeboy: I know where to get the blue orb, but what kind of epoxy did you use...or did you use a thermal pad? i was thinking about getting something for my video card, but i'm new and i don't wanna make any bad decisions. In powerstrip it only lets me oc the mem clock anyway, so i guess it's...
- EvilPig
- Post #10
- Mar 4, 2001
- Forum: CPUs and Overclocking
E
Radeon LE Overclocking

I just got a Radeon LE from Newegg.COM (got it 2.5 days after i ordered!!! YES!) to replace my Monster Fusion (Voodoo Banshee with 16mb ram in case you didn't already know) and my Radeon just kicks my banshee's ass all over the place! I must say i'm VERY happy. But i'm a little nervous about...
- EvilPig
- Thread
- Mar 3, 2001
- Replies: 21
- Forum: CPUs and Overclocking
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

I've never suspected it was my AGP card, i'll check it out. I'm not too sure I wanna boost the voltage, it seems like a messy and time consuming task and i'm just not that desperate (that is if what i've read is accurate: you need a permanent marker, super glue, a bent paper clip, and some...
- EvilPig
- Post #22
- Feb 19, 2001
- Forum: CPUs and Overclocking
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

the board revision number is 1.02, so i guess if i wanted a faster cpu i'd have to use the slotket method...truthfully i'd rather just buy a new slot 1 motherboard that nativly supports PC133 memory so i don't have to overclock anything...but i'm not sure i want a slot 1. the only reason I do...
- EvilPig
- Post #14
- Feb 10, 2001
- Forum: CPUs and Overclocking
E
Overclock video cards using power strip?

to overclock your video card with powerstrip: after you install powerstrip, you'll see the monitor icon in your system tray, right click on it, select the submenu "Advanced" or something like that, then select performance. there should be 2 sliders (sometimes there's might be one, or...
- EvilPig
- Post #4
- Feb 9, 2001
- Forum: Windows
E
I got a Monster Fusion, few questions...

Ok, i've made my decision: I found a Creative 3D Blaster TNT2 32mb AGP (yes, 128mhz mem) for less than $80, and that's INCLUDING standard ground shipping. I don't want some crappy TNT2 M64 and those LEs sounded like bad news. hopefully i'll get enough cash in a few months to just buy a new ATX...
- EvilPig
- Post #10
- Feb 9, 2001
- Forum: Graphics Cards
E
I got a Monster Fusion, few questions...

yes, i just found that out from a friend of mine....after i got him to stop laughing for an hour. I have been stuck in the timeperiod when PII-400's were the fastest thing out there. And so, with a crappy system and a tight budget, I have to say I'm gonna get an older video card, as long as it...
- EvilPig
- Post #8
- Feb 8, 2001
- Forum: Graphics Cards
E
I got a Monster Fusion, few questions...

one more note: inno3d tornado geforce2 mx 32mb agp oem w/heatsink (no fan)~ $90 1mb svga pci card~ $16 good deal?
- EvilPig
- Post #5
- Feb 8, 2001
- Forum: Graphics Cards
E
I got a Monster Fusion, few questions...

here's the deal: i've found a geforce2 mx card and a 1mb pci card for ~$110 plus shipping, but i don't know if it matters who makes the geforce2 card or not since all geforce2 labeled cards use, well, geforce2 technology. i'm new, but i'm fully aware i'm taking a performance hit with an...
- EvilPig
- Post #4
- Feb 8, 2001
- Forum: Graphics Cards
E
Hot Deal! Geforce 2 MX Retail - $99

if you go to: http://ocie.safeshopper.com and click on video cards, agp, 32mb, no tvout you'll see this lower down: Inno3D Tornado GeForce2 MX 32MB AGP OEM W/HEATSINK (NO FAN) for ~$90 shipping is heavy on the money though...:(
- EvilPig
- Post #20
- Feb 8, 2001
- Forum: Hot Deals and Giveaways
E
I got a Monster Fusion, few questions...

First, does anyone have any performance tips? The card comes stock overclocked at 114/114mhz and has a fan on already and doesn't require a base SVGA card. I've used Powerstrip once and a while, but it just started bugging out on me so I killed it. In case you didn't already know, the Monster...
- EvilPig
- Thread
- Feb 8, 2001
- Replies: 9
- Forum: Graphics Cards
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

i'll look into that celeron idea (the only thing i can assume about a 600mhz celeron being overclocked to 900mhz is that it would be faster than a pii 450mhz...i'm not sure how much of a performance hit the smaller l2 cache takes, maybe someone could enlighten me...again) and it turns out it IS...
- EvilPig
- Post #12
- Feb 8, 2001
- Forum: CPUs and Overclocking
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

OK, i've played around with the jumpers and the highest I can get is 448mhz. scorch2000: how'd you get it up to 496mhz? you wouldn't happen to remember the jumper settings would you? I don't know how to read a manual, but according to what's in the book, I have my system currently set on CPU...
- EvilPig
- Post #8
- Feb 8, 2001
- Forum: CPUs and Overclocking
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

Ok, i'm done dealing with the overclocking, thanks for the help, i got my CL3 to run at CL2 and so far so good! I've run Unreal Tournament, 3D Studio MAX R3, and Adobe Photoshop 5 without a hitch. Oh, I should also mention that this newbie just overclocked his PII400 to PII 447, small victory...
- EvilPig
- Post #89
- Feb 7, 2001
- Forum: Hot Deals and Giveaways
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

Well I moved some jumpers around and here's what i've gotten done: I used the hot deal on the crucial pc133 memory and got a 256mb stick to add in with my 64mb pc100, the new pc133 stick is cl3, but I was able to go into my bios and overclock the mem to cl2 and i got my cpu up to 447mhz which...
- EvilPig
- Post #7
- Feb 7, 2001
- Forum: CPUs and Overclocking
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

here's the funny part, i don't know what ANY of that is. coppermine? what? are you talking about PIII support on an asus motherboard? hahahah, i'm totaly lost. I guess I forgot to mention that i've only reciently started understanding hardware terminology. :)
- EvilPig
- Post #5
- Feb 7, 2001
- Forum: CPUs and Overclocking
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

you have a piii on a p2b?? i thought the p2b could only support a pii and celerons.....i'll have to check it out....yeah, I think my mother board can run at 100mhz normally since i have 1 module of pc100 ram and one pc133 stick (of course i'm not expecting it to run at pc133 on a pc100...
- EvilPig
- Post #3
- Feb 7, 2001
- Forum: CPUs and Overclocking
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

i'll check out my bios for that and i'll scan my motherboard manual, but thanks for clearing up the abreviations! i had no idea what 2-2-2 meant. thanks!
- EvilPig
- Post #87
- Feb 7, 2001
- Forum: Hot Deals and Giveaways
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

how do you overclock cl3 memory to cl2? i have a pii 400 on an asus p2b motherboard. apparently the default speed is 100mhz bus. sorry if this seems a little off the topic...
- EvilPig
- Post #85
- Feb 7, 2001
- Forum: Hot Deals and Giveaways
E
How can I overclock a PII 400 on an ASUS P2B motherboard?

I've got a PII 400 with an ASUS P2B motherboard and I have SOME idea on how to over clock it, but I've only been able to manage to get an extra 1MHz out of it! hahah There are a few tutorials out there that I looked at but they were really vague and I don't have any other method for cooling...
- EvilPig
- Thread
- Feb 7, 2001
- Replies: 21
- Forum: CPUs and Overclocking
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

I got my mem yesterday (tuesday), would've gotten it monday, but I had to be there to sign out for it and i work full time. At least I got it! =o) Yeah, Crucial might be out of stock, and a note about the online tracking: IT'S NOT ACCURATE. As far as I could tell, the Delivery Date was just...
- EvilPig
- Post #78
- Feb 7, 2001
- Forum: Hot Deals and Giveaways
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

Gustavus Dude, call Staples. You shouldn't be waiting that long. Raise some hell man, that's crap. I've only been processing for 2 days and i'm about to call them now. But you should definately call them and ask what gives.
- EvilPig
- Post #69
- Feb 5, 2001
- Forum: Hot Deals and Giveaways
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

Forgot to mention: THANKS H1ghlander!
- EvilPig
- Post #51
- Feb 2, 2001
- Forum: Hot Deals and Giveaways
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

Ok, here's the whole thing: go to the staples web page and do the search for the memory, click on the link to see the results and click on the only listing that's there to see the product number below the image block. Open a new window and go to the Crucial site and take note of the price. Open...
- EvilPig
- Post #50
- Feb 2, 2001
- Forum: Hot Deals and Giveaways
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

you gotta call 800-3STAPLE and select 1 for sales and just ask them to do a pricematch.
- EvilPig
- Post #49
- Feb 2, 2001
- Forum: Hot Deals and Giveaways
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

CORRECTION: The ground shipping was NOT free. I repeat NOT FREE. It cost something like $5.50. If you get some Canadian lady, hang up and dial in again to get a different CSR.
- EvilPig
- Post #46
- Feb 2, 2001
- Forum: Hot Deals and Giveaways
E
HOT: Crucial PC133 256MB CL3 @ Staples PM, $74 + Tax

I just ordered it today and it cost around $93 and ground shipping was free because the order was over $50, but when I asked them to use next day, she said they don't even have next day. Yeah, right. So apparently I'm gonna get it no later than Friday (the 19th!!). But it's a great deal, so I...
- EvilPig
- Post #45
- Feb 2, 2001
- Forum: Hot Deals and Giveaways

RESOURCES

Top Bottom