I have a Elsa Gladiac 32 MB DDR Vid Card.
What Size should have I have my AGP Aperature set to?
Does it make a difference what it is set to?
Specs of my Rig:
900 Mhz AMD athlon T-bird with 3Dnow
Abit Kt7A mobo
Sblive sound card
512 MB PC133 SDRAM CAS3
Windows ME
40 GB HD 7200 RPM ATA100
20 GB...
Warranty can come in handy. I had a viewsonic monitor act funky on me (the colors where turning blue) after 6 months and I called viewsonic up and they told me they would replace it. In my case it helped alot since my monitor cost me about 350.But maybe this doesnt happen to often.
my 2 cents
Hello,
Here are the specs to my rig:
900 mghz AMD T-bird
520 MB ram
abit kt7a mobo
40 GB ATA 100 7200 RPM HD
20 GB ATA 66 7200 RPM HD (connected to an pci ata adapter)
elsa gladiac Vid card
Windows ME OS
Hitachi DVD rom drive
sblive sound card
Im having trouble making a backup copy of Unreal...
CmaMath,
I reformatted my drive last nite. I reinstalled win me and updated the latest drivers for my Hardware.
I also installed UT the contents of disc 2 (the extra models and skins)
I also dl the patch v436 for UT and updated UT.
UT will run sometimes but it never closes properly. It gives me...
I run Unreal Tournament on my
900 mhz AMD Tbird with 3DNow
768 MB PC133 CAS3 memory
Windows ME OS
Elsa Gladiac Vid Card
Abit Kt7A Mobo
Creative Sblive value
Sometimes it wil hang my system and I hit Cntrl-Alt-Del to check my processes and I see msgsrv32 (not responding)in the list. Whenever I...
Hello,
I just installed an OEM version of Windows ME on my new pc and when I try to run Unreal Tournament (along with other things) my systems hangs and when I hit CTRL-ALT-DEL I See that in the list says:
msrvqs.exe (not reponding) WTF is that?
Here are the specs to my rig:
Abit KT7A mobo
900...
I think this is a great deal. No place better to get s***-faced and play games to your hearts content...not to mention to flirt with the nice looking waitresses...and the hotties that go to D&B...woohoo!
I had bought alot of my PC parts at PowerUp. They are good. And they know alot about what goes with what (unlike Microcenter and CompUsa).
They are very reseanoable too. Try them out. Only bad thing that they dont open on the weekends...=(
Mem,
Thanks once again. I have a dumb question. How do I know I have a via chipset on my pc? is it on the mobo, memory vid card?
I have an abit KT7A mobo and generic memory, and an Elsa Gladiac 32 AGP card. Im not sure is the chipset for. Thanks again and pardon my ignorance...im learning heh...
Thanks mem. Where Can I get the Via 4-1 drivers?
So my monitor can be the one causing this problem?
hmm. I might have to search and download the latest drivers for it.
Thanks so much. Any more input would be appreciated.
:D
My CPU is an 900 Mhz AMD Athlon ThunderBird with 3DNOW.
My motherboard is an Abit KT7A. I beleive i have the UT patch v436 ( I beleive this is the latest) I have soundblaser live value card and I downloaded the livewire 3.0 for ME (the latest I beleive).
I have a 40 GB Quantum 7200 rpm ATA 100...
Hello,
I seem to have alot of problems with my vid card. I dotn know if its is that I dont have the right drivers but this is becoming rather fustrating. :(
I have a Elsa Gladiac 32 MB AGP card running on Windows ME (crap system..I wish I had 98). Running on a 900 mhz processor with 768 MB of...
Im running Windows ME with an Elsa Gladiac AGP 32 DDR MB. My processor is 900 Mhz with 768 MB of RAM. The reason I wanted to run it under D3D was it looks better under that mode vs the directdraw. I used to have a voodoo 3 and it ran fine under that. I see if I upgrade to 6.5
Where Can I get...
I went and downloaded the latest drivers nvidia provide (detonator 3 i think) and Diablo 2 will only load under 2D. Anyone out there was able to run diablo 2 under using the d3d drivers?
Thanks
Since you say you put together a new PC, then that means all software was freshly installed after hardware was assembled?
Yes, I installed all software after the hardware.
You went to your motherboards site, or web sites devoted to your motherboard, and read up on this combo, and made correct...
Hello,
I just put a new pc togethere with ME as the OS. I installed the gladiac, but I am having some trouble with some games. Example diablo 2 wont load under direct3D only Direct2D (even though it says it can). Unreal Tournament doesnt load perioud. And the worst but not least, when I start a...
Ive been wanting to add this module to my Elsa Gladiac, but I have windows ME. I notice on the retailers site that it only supports Windows 98. Does anyone know if there is a Windows ME driver out there? or Is anyone using this module under windows me?
Thanks
I have a 900 Mhz athlon with an Abit kt7a mobo. I bought a coolmaster and it is running at 51C w/o a case at idled. I called the store up and they told me they had a better one.
Here is the description:
Alpha PAL6035MUC heatsink with Sanyo Denki fan(19.4CFM, highest quality available...
What is the best cpu fan to have for a AMD Athlon Tbird 900 MHZ on a Abit KT7A Mobo?
I have a KT7A abit Mobo and an 900 Mhz Athlon Tbird chip and I was using a Coolmaster DP56H11 and It was not doing the job (it was a 51C at idled and open case). I was wondering if you guys could tell me the...
I ordered two sticks of 256 MB Memory sticks from Zeus.
"256MB 32x64 PC133 Non-Parity Unbuffered 3.3V SDRAM"
And a stick of 256 MB micron (here are the micron specs)
Micron's 256Mb Synchronous DRAM (SDRAM) support includes 64 Meg x 4, 32 Meg x 8 and 16 Meg x 16 organizations...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.