Search results

  1. G

    Cooling for a quiet 3900 AMD processor - what is recommended?

    That 280mm corsair is perfect in the desktop with the 3600. You can barely hear the fans kick in. I wouldn't trust the 3900X in that motherboard, but it's great in the little midrange box. Before the intial aorus died within 3 days, the case fan were louder then the noctua. That EVGA 360mm...
  2. G

    Cooling for a quiet 3900 AMD processor - what is recommended?

    The NH-D15 is the quietest. After the x570 aorus master died after 3 days, I RMA's it (NewEgg replaced it), but I needed something in the meantime, so I snagged combo deal with 3600 and an MSI WiFi gameing Edge and a 280mm Coursair CLC. That was almost as quiet as the Noctua, and haven't had...
  3. G

    People avoiding GB B450 & X470 boards?

    For what it's worth, even though the Aorus Master I bought died 3 days after it arrived, I still like it. It seemed very well built (frankly over the top) the BIOS was mostly laid out logically (two or three BIOS features were poorly explained in the manual), and that 3900X at least seemed...
  4. G

    AMD Ryzen 3000 Builders Thread

    Cool, cool. :) The 3900X build is air cooled, too. I got a Meshify S2 for it (so space isn't an issue), but if I had to do it over again, I'd get an O11 dynamic or something close to it. There's definitely no issue with airflow in there, since I strategically put enough NF-F12s in the right...
  5. G

    AMD Ryzen 3000 Builders Thread

    Cool! I was leaning towards that one, since it'll eventually end up in a mid-range gaming rig anyway, once I get this crap with the work desktop sorted out, and back up and running. Thanks! :D Oh, BTW, I've still got that Wraith Prism cooler that came with the 3900X (I used an NH-D15 for...
  6. G

    AMD Ryzen 3000 Builders Thread

    Did you go with an x570 board for that 3600, or upgrade the BIOS on an X470/B450? Since my motherboard kicked the bucket during a reboot just 2 days after I build the new system, I'm thinking about grabbing a 3600 and a sub-$300 (<$200 would be better) X570 board so I not only have...
  7. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    Whelp. It was fun while it lasted. Looks like the motherboard went tits up about an hour ago. Not even getting the little reset switch on the motherboard to light up. I pulled the PSU out of it, and connected it to the old desktop, and it powers up. I tried the PSU from that PC in the new...
  8. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    I wouldn't necessarily trust Ai Suite 3. On the desktop I just replaced, it would routinely tell me my case fans weren't active (despite being able to hear them run), and it would also alert me that the vcore had dropped to 0.00 while I was working. Any chance something is gunking up the...
  9. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    Ah! Cool. I was starting to wonder if I should be very concerned. :D
  10. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    Huh. I just checked mine (it's definitely not at idle right now, but I'm not pushing it hard), and with basically everything at stock except enabling SVM and an XMP profile, and disabling PBO, the vcore on this 3900X is pulling more than that:
  11. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    I used Aida64 Extreme in Win10 1903, and didn't get a BSOD or a CTD, either. Not sure what the deal is there. The reported CPU and CPU diode temps in it were off by just 1 degree from each other in my tests.
  12. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    It's the "Apply & Test" button at the bottom. After you click that, it'll show "Running Stress Test", with the normal meters still semi-visible behind that.
  13. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    I found the tip on using Advanced View to change the compute settings before I ran the test. ; ) I also double-checked Resource Monitor, and made sure all 24 "CPUs" were pegged at 100%.
  14. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    Wow! I just tried it, and averaged 81C, with spikes up to 90C, and I only let it run for 3 min. O_o
  15. G

    PrimeGrid PPS LLR (CPU temp) challenge (for Ryzen 3000-series owners)! (Testing heat density of TSMC 7nm)

    Assuming I picked the right project, I predominately saw temps hovering between 65/66C. I briefly saw the temp jump to 80C when I shut down BOINC. I've attached the before and after (I just ran that project for 30min, since I need to get working anyway). FWIW, here's the hardware: 3900X X570...
  16. G

    AMD Ryzen 3000 Builders Thread

    Yup, even the normal 140mm fans can definitely get loud when the CPU is under heavy load, but those IndustrialPPC fans are even louder at full speed. The 120mm NF-F12s aren't exactly quiet, either. Still, they've got fantastic static pressure.
  17. G

    AMD Ryzen 3000 Builders Thread

    Hehe, getting between 3.9 and 4.2GHz on some cores, just transferring 3TB of files off an external USB 3.0 HDD to a WD Blue 6TB HDD. I also attached the RAM info from Ryzen Master as well, for the curious. It's that Vengeance LPX 3200 CL16 (4x16GB) DDR4 kit. Hopefully I can tweak my cooling a...
  18. G

    AMD Ryzen 3000 Builders Thread

    It's really dependent on which board has the features you need. There seems to be zero point in trying to overclock the 3900X, so according folks like Buildzoid, the VRM design on the $200 and up motherboards is perfectly fine. I'm not 100% happy with the F5G bios on the aorus master, so I'll...
  19. G

    AMD Ryzen 3000 Builders Thread

    It's entirely possible. The F5G BIOS (AGESA 1.0.0.3AB) has a single XMP profile for that 3200CL16 LPX kit I have installed. It does run the memory at 3200 16-18-18-36, though.
  20. G

    AMD Ryzen 3000 Builders Thread

    Nope, it's running at 3200 16-18-18-36.
  21. G

    AMD Ryzen 3000 Builders Thread

    @Fanatical Meat @StinkyPinky @IndyColtsFan Just a quick update. all the parts arrived late yesterday, so the new build is assembled, and Win10 Pro is installed. That aorus master mobo showed up with the F3 BIOS installed, and since GB put out the F5G BIOS (AGESA 1.0.0.3AB) the other day, I...
  22. G

    AMD Ryzen 3000 Builders Thread

    Oh man, I forgot about that stupid puzzle with the melting mugs! Way back in the day, a buddy of mine owned a t-shirt shop, so we made a couple of Monkey Island shirts that had that recipe for grog on the back. :D Wish I knew what happened to those... Yeah, I was going through some Gamer...
  23. G

    AMD Ryzen 3000 Builders Thread

    That was the point of his video. There's been a ton of rampant speculation about the VRM designs on the various X570 motherboards, and a number of folks were effectively steering other people towards much costlier motherboards with "superior" VRM setups that they don't even need. If a...
  24. G

    AMD Ryzen 3000 Builders Thread

    FWIW, from the folks I know that run it, 6.7 U2 is supposed to work well on EPYC-based systems. That said, you may very well be able to get it running on a Ryzen 3000 CPU (or the inevitable TR versions), but if you run into a snag, the VMware support forums are probably gonna be the last...
  25. G

    AMD Ryzen 3000 Builders Thread

    Kinda glad I didn't grab the Strix-E right now. o_O (not that the aorus master won't have it's own unique blend of suck going on. I'm still waiting on it to be delivered, so I guess I'll get to find out.) Has anybody seen a review of the ASRock X570 Micro-ATX motherboard? After fighting...
  26. G

    AMD Ryzen 3000 Builders Thread

    Thanks! :) The original name was pretty funny, but the last thing I wanted was to cause some uncomfortable conversations, if anybody's kid got on here. "Mom, what's a **** ring?"
  27. G

    AMD Ryzen 3000 Builders Thread

    That's quite possible, but I haven't stumbled across any in the last 3-4 weeks I've been looking. That's the sole reason I even went with the LPX kit, since I got the same cooler for my 3900X build. Otherwise, I would've snagged a Ballistix kit, or maybe a CL14 G.Skill kit.
  28. G

    AMD Ryzen 3000 Builders Thread

    Theoretically, the 64GB kit of LPX 3200 I ordered should be here tomorrow afternoon. Assuming it actually does arrive on time (I've got a feeling it'll end up being Wednesday morning) and the DIMMs aren't DOA, I'll let you know how it goes.
  29. G

    AMD Ryzen 3000 Builders Thread

    Those DIMMs are about 40mm tall, so the options with an NH-D15 would be to either raise the front 140mm fan up (if the case has enough space for that), swap the front fan for a 120mm, or remove it altogether, and use it like an NH-D15S and mount the 140mm fan as a case fan somewhere. The...
  30. G

    AMD Ryzen 3000 Builders Thread

    That's understandable. I was helping out a friend on his build a few years back who was dead set on ASRock, due to the price. After all the headaches I watched him deal with, I swore them off, too. I've had some builds with Asus and Gigabyte boards that are still alive and kicking (*knock on...
  31. G

    AMD Ryzen 3000 Builders Thread

    I hear ya on the 32GB DIMMS. I won't be running server loads per se, but the VMs I do use (and the number of instances) can be very resource hungry, core and RAM wise. If you aren't wedded to the idea of needing 8 sata ports, that aorus master does have 6 sata ports and 3 M2 slots, and you...
  32. G

    AMD Ryzen 3000 Builders Thread

    That is pretty messed up! I ordered mine Wednesday as well, and they sent it out from NJ, so I got it Friday. Going from Buffalo to California and back to Indianapolis is like going around your elbow to scratch your butt.
  33. G

    AMD Ryzen 3000 Builders Thread

    Will do!
  34. G

    AMD Ryzen 3000 Builders Thread

    Yup, the QVL for the X570 Strix-E lists some 3600 4x16GB kits. Guess I'll find out Tuesday how well the x570 aorus master handles a 64GB 3200 CL16 LPX kit...
  35. G

    AMD Ryzen 3000 Builders Thread

    Sweet! Those look perfect for the smaller 3600 build I'm wanting to do, once the current build is finished and stable. Haven't decided if it'll be a Mini-ITX build, or use the smallest dual-chambered ATX cube case I can find.
  36. G

    X570 motherboards

    Thanks for the video! :) It didn't clear up everything, since the manual for the Master isn't the clearest in the world (what the crap is "above 4G decoding", and how does it relate to gfx cards?) I'm still puzzled why they're so proud of their 3DMark01 cheat er.... "enhancement", that they...
  37. G

    AMD Ryzen 3000 Builders Thread

    The host OS is gonna be Win10 Pro, since I need to use Hyper-V occasionally, but the vast majority of the time, it'll be *nix-based VMs like IEC said, and what SK10H is trying to run in WS 12.5.x. :D WS Pro 15.1 and those VMs work great in Win7 Ultimate at the moment, though. But that's an i7...
  38. G

    AMD Ryzen 3000 Builders Thread

    That's not good. Guess I'll find out Tues/Wed if there's an issue with WS Pro 15.1.0 an a 3900X, and whether I need to keep using the 2600K-based desktop for work, and wait on a patch, or not :oops:
  39. G

    What qualifies as B-die memory? I have Samsung memory that boots 14-16-16 @ 3200mhz

    Heh. Sorry about that! I'm too used to needing to explain things to students in nauseating detail, and can't assume their level of tech knowledge. :D Back in 2017, I saw all sorts of claims that "B-die was anything rated for 3200 and up" , which may've been true then, but I don't recall ever...
  40. G

    AMD Ryzen 3000 Builders Thread

    Have you confirmed that from the manual? The way the ryzen 3000 slides were written, I thought I'd lose 2 sata ports by using any M2 slot, no matter what. I was flipping through the manual for the x570 motherboard I ordered, and as long as I don't use the third M2 slot, all 6 sata ports are...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |