Also on MSI support page for that motherboard the 4gig version of my GPU(Sapphire RX 460) is not mentioned. Is that a problem? Only the 2gig version of RX 460 is listed.
I have a Ryzen 3 1200 CPU with 8GB Corsair CMK8GX4M1A2400C16R RAM module. I want to use this memory with the MSI B450M Pro VDH Max. Will this memory be compatible with this motherboard. Anybody has a bad experience using this specific memory module with the motherboard I mentioned?
It is not on...
Could it be that the refurbished motherboard connector lost contact due to wear and tear done by excessive use before the service center gave it to me? If I decide to get it replaced (the connector) how easy is it?
The motherboard and PSU were working fine before. I think my problem will be solved after I get the connector replaced and if it doesn't I will change the board. I have already sent my PSU for replacement.
I am not overclocking anything. My GPU does not have the 6 pin connector. I cleaned the pins with isopropyl alcohol but the burns didn't go. I will see if I can get the connector replaced by some local shop.
I used a torch to see if the pins on motherboard were corroded or not. I saw that the two pins burnt did not reflect light properly as the other pins did. For PSU I have this picture-
https://drive.google.com/open?id=1PlnOALYrTvyuiw87akSqEDIsPfj5XjdS
Pins 2,3 from top are burnt. I did not...
Can I test it if it is bad or not ? The people at service center said that they tested it for 6 hours and they didn't find anything wrong. Please guide. I am ready to replace my board if it is a risk for my components.
I have a CX 450 PSU which I bought in july 2019. My specs are-
Ryzen 3 1200
AB350M-GAMING3
RX 460 4GB
16GB DDR4
Due to some issue with my motherboard (not related to power or the connectors) I go my motherboard replaced with a refurbished one. My PSU wass working fine till then. After a month...
I have two RAM modules installed in my system. Both have almost same specs. The only difference is chip manufacturer. One is made by SKHynix and the other is Microntech. My RAM model is CMK8GX4M1A2400C16R by Corsair. I have issues running certain games like Wolfenstein 2 and I think they are...
I have windows 10 with feature update 1903. I am having problems switching to normal startup configuration from msconfig. It was set to selective startup by default which is really weird. On all systems boot configuration is set to normal but on mine this is not the case. As advised by microsoft...
I found out the root cause of the problem but I don't know how to fix it. When I enabled bootlog option I saw that a directx component named as dxkrnl.sys is not loaded while booting. It could be AMD drivers issue or my motherboard. I have tried doing clean install of windows and running directx...
What is confusing me is that when the fps climbs the power consumption rises and when the fps drops power consumption lowers. I think psolord is correct about power consumption behaviour of GPUs. And yes my temps are fine.
Do you mean forcing vsync off using .ini files? I tried that already. I saw on the internet how a GTX 960 was having problem with this game so i think my fps is as it should be. What do you think?
It could be something else. Considering windows and drivers it is difficult to point at one thing. Recently I discovered that WHQL drivers are far ahead in performance in comparison to other drivers. But I also have seen how stuttering is introduced in new BIOS updates and get fixed in new...
I don't know but I am having issues with this board in games. They stuuter a lot. And my PSU(CX 450) should not be a problem. And the main thing is that each time I update BIOS I have different experience. Which BIOS are you using? Also because I have 1st gen Ryzen does it mean that I should not...
I was wrong about HPET. It has zero impact now. I have now tested again and confirmed it. However I still oppose buying Gigabyte products as I believe that my GPU is underperforming on this board. Also I get weird errors with this board in games and after changing all components except...
F31. I updated to the F41a BIOS too but I liked F31 more. Still HPET is enabled by default in both BIOS. And do see the link I posted. Have you ever tried disabling HPET on your Gigabyte board? If yes then did you notice the difference?
I am one of those who just hates Gigabyte and I have satisfactory explanation and proof for that. Here is the proof-
https://community.amd.com/thread/227041
Being an owner of Gigabyte board (AB350M GAMING 3) I know how much I have suffered. It is not about defects but the BIOS. For eg. they use...
That is another weird issue. In all games due to higher power consumption the temps go above 70 but only in THIS specific game they are around 60-65 due to lower power consumption. And about warranty I tried that too and I got another card with different serial numbers but the same errors. So I...
Max clocks. The most surprising part is that the most intensive scenes like diamond city run well while others do not.Only when I step on shadows and that too from a certain angle I get horrible fps. And yes one more thing, the godrays are pixelated for some reason even on high godrays setting...
It is a Sapphire RX 460 4GB Single fan version without the 6pin connector. This one-
https://www.techpowerup.com/gpu-specs/sapphire-rx-460-oc-single-fan-4-gb.b4216
Tried reducing all draw distances and 0 effect. How is the tomshardware benchmark showing r7 370 and r7 360 playing the game at acceptable frame rates? Post the link of the thread.
I am going to upgrade my GPU soon but what I wanted to know was why I see the power droop in those games. Nobody has explanation for that. And yes regarding the age of my components you gotta consider the age of the games that I am playing.
Ryzen 3 1200 which is not used above 20% in these games. PSU is CX 450 and motherboard is GIGABYTE AB350M GAMING 3 with16gb RAM. Are you sure techpowerup is using ultra settings?
While playing Fallout 4 and Far cry Primal I noticed that my RX 460 was not drawing its full 76W as it does in Furmark and other games. It was stuck at 52 W and I got only 24fps. However the GPU utilisation was not dropping much , only to 98% when the drops ocurred. Is this behaviour normal? I...
I have a corsair carbide 100r case and I currently have the VS 450 orange PSU. I want to switch to CX 450 but I am doubtful if it fits in my case. I saw the tomshardware review of the CX 450 and they wrote the dimensions as (WxHxD)152x82x143 mm. The corsair site lists that the dimensions are...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.