Hello Everyone,
I have a HPE m510 server blade.
The blade has a CPU but it is soldered on to the board.
I am trying to desolder the CPU from the board.
I am using a desoldering heat gun and I have tried temperatures 220-320 degrees Celsius ,also using Soldering flux paste.
I am still having...
This aint a homework question. How do I know how many cpu cores or threads are needed based on all the different applications and workloads out there to compute? Just trying to get a better understanding.
How can I determine the appropriate number of CPU cores needed for various tasks and applications? I would like to understand how CPU core count impacts performance and resource allocation for different activities. Please provide guidance on the following:
Basic tasks: What is the recommended...
Hello, I have a LENEL LNL-1320-S2 module board that I am trying to power up. What I found online is it takes 12V24V. I am not sure what this means and where I can get it. If anyone knows any information on how to power up this board it would be really helpful. Thank you
Hello, I have some dell thin clients that have windows 7 embedded version on them.
I need a windows KEY though to get it registered.
I have had no luck finding the windows 7 embedded key anywhere to buy online.
If anyone knows how or where I can get the windows 7 key it would really help.
Thanks
Hello, I have a Seagate ST373455LW hard drive with a firmware model M002. I am trying to change the firmware back to the default version it comes with. If anyone knows where and how I can do this, please let me know. I would really appreciate it. Thanks.
Hello, I am having trouble with my eaton power module model #ASY-0673.
It is not giving power to the rackmount.
Any information on if I can get this product repaired and if there is a way to check if the power module is functioning properly like a simple test of some sort,
Any information would...
Hello, I have a sierra airlink GX450 that has the ATT firmware on it.
I am trying to get this device to work with the sprint and Verizon firmware as well.
But every time I go into ace manager and install the firmwares from the sierra wireless website for Verizon and sprint I get a message saying...
1. Hello to anyone reading this. For a while I could not get the right solution for the power connectivity for this camera but finally I have it connected to the right power source and connected to my monitor.
2. Every time I power on the camera itself the camera in the dome starts making a...
Hello, I was able to get the bnc to hdmi converter but when I tried to connect it through a regular power supply and the bnc to hdmi converter, it gives me no response. The monitor is saying there is no signal like nothing is connected. In the manual is says the power source is 24 V AC, 60 Hz. I...
thank you for the information, but I am actually having a hard time finding a power source. In the manual it says Power Source 24 V AC, 60 Hz. I have not been able to find this power source that specifically fits with the camera. Below I will attach a photo of the power connector for the...
Hello I am trying to re image my Dell Wyse 5030 / 909569-01L (p25) thin client. It is a VMware product and I cant get into any bios setting when I boot it up. I need to re image this. If anyone has any information on how to re image this specific product I would really appreciate it.
Hello, I have a Panasonic WV-CW864A CCTV camera and I need to test it to see if it is functioning prooperly, According to the manual i need a certain switch of some sort to see if the camera is functioning. I was just wondering if anyone knows if there is a universal switch or something that I...
Hello, I am trying to run a benchmark test on some used NVIDIA Quadro K4200
Part No. VCQK4200-PB.
The motherboard I am using is an Intel DQ67SW which is running off Windows 7 64bit.
If anyone knows which application would work with this setup to run benchmark tests on the card, I would really...
I am trying to check power on hours for my drive (MTFDHAL3T2TDR-1AT1ZABYY) on windows 7.
I have tried the crucial storage executive program.
I have tried seatools for windows.
I have tried the cmd shortcut method.
I have tried hard disk sentinel program.
I tried all these programs but they are...
Hello, the drives are not showing up in disk management and its also not showing up on device manager. So you think its most likely my cables? I have 2 pci cables and they were working fine previously but they are not new.
Hello, I am trying to connect my micron MTFDHAL3T2TDR-1AT1ZABYY 3.2TB drive to my windows XP system and my windows 7 system.
None of my windows systems are detecting my my drive but the drive is new. I have 2 other new drives. also not being detected.
I am using LSI card and im using a pci cable...
Hello,
I have a S2600WT intel motherboard but when i plug it in and start it up the video is not showing on the monitor.
1. The processor i am using is an intel xeon SR203 3.20GHZ
2. the memory i am using is DDR4 MTA9ADF1G72PZ 8GB
If anyone has a solution to why the video is not displaying id...
I have an intel DX79TO motherboard and im trying to run the benchmark test on it. If anyone knows how to run the benchmark test on this and where i can download the benchmark test software or program, id appreciate it.
I have a brand new Plextor PX-716A dvd writer and it won't read or write anything. I need help updating the firmware to see if that might fix the issue. I'm having a hard time trying to update the firmware on this dvd writer. If anyone knows how I would really appreciate it.
I have a Motorolla MC75A8 scanner and im trying to update it to see if it might fix the touchscreen. If someone knows how to update this device id really appreciate it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.