Oh and the horse power as I will be playign a lot more than older games on this as time goes on :)
THis is also a Jukebox / DVD Player / Movie File Player / ETC ETC Multip purpous machine
I looked at the links and all they were linked to was http://shot1 when they were labeled with the link then shot1 as the link....
All of you that came up with NSFW pics must have some bad stuff on your own machines lol
I honestly looked at the first link and though you were speaking...
Ok everyone long delay between updates but I finally got the Marquee assembled and put on after some problems. I had designed the Marquee one way and the person who was helping me cut it differently and really threw things off by quite a bit.
But since it was free help and it is more than I...
I am currently building the Marquee and was looking in to how to print it out and decided to have someone else do it to have it look a little better. I found one place out there (I am sure there are more) that has pre-made marquees or you can send in custom size and picture and they will print...
so far it is a 1800+, 512mb mem, 9800xt, 80gb 8mb cache 7200 rpm, 16xdvd, NVTV single tuner, 10/100 NIC.
I plan to make it a Duron 3000+ later on for plenty of horsepower :)
I have started the log for this project wanted to pass this along to any who were interested. I have always wanted my own arcade machine and finally began construction on one. The only thing though is that my arcade machine is a slim one using a 17" flat panel and can be taken apart in to...
Going for an upgrade...what do you think....
Ok I could possibly geta free a64 board... and then buy a 3000+ and use my existing ddr 333mhz mem in it until I get some 400mhz mem in...
Or
I have Abit IS7-E board now and could pick up a p4 2.6c for dirt cheap from intel retail program which...
well I sent them an e-mail and never heard anything back....
BUT
they have removed the content and now have the wrong item in the pictures...they obviously have no Idea what they are doing there....
Still ticks me off....no apology, no responce, nothing!
uhhh... no
Read it, actually read it..don't glance, fully read it
Word for Word taken from my site. I wrote that and did not borrow any lines or etc. Even the part where I say:
"ATI says the HDTV adapter is out of stock for my card. Where else can I get one?
The only other place I know of to...
what about this for an e-mail?
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
It has been brought to my attention that the page for the ATI HDTV adapter had taken the FAQ on the product from my webpage and guide which can be found at the following...
I got the picture directly from ATI I am enrolled in their partner program at work and have full permission to use any promotional itmes or materials needed including pictures :)
Ok go to this URL....
http://www.z-buy.com/product.asp?item=VG-AHDTV
now go here:
http://www.mrmicro.net/joshua1/atihdfaq.htm
WTF? I would have understood if they had asked me but they just completely ripped me off???
What should I do?
http://www.aldifoods.com/Special_Purchase/pr1103_1.htm
Dont know how good of a deal this is but figured I'd post it here.....
Looks like its $399 at BestBuy
http://www.bestbuy.com/site/olspage.jsp?id=1051826098803&skuId=5276747&type=product&cmp=%20%20
I'll throw in my 2 cents here :)
I reccomend anyone thinking about anything Home Theater related should visit the link SpaceHulk Posted. The AVSForums are a great place to gain lots of knowlege on HT related items. I found the site and havent been the same ever since. I built my HTPC thanks to...
I was wondering what your opinion of the optimal settings for a Server are on the HDD Configuration.......
Please leave raid 5 out of this configuration :)
Two SCSI Drives Mirrored and partitioned so OS and data are on the same drive but seprate partition?
One IDE Drive With the OS, two SCSI...
People who should read the guide:
People who have the ATI HDTV adapter and are tired of playing games at 640x480
People who have the ATI HDTV adapter that want to play games that cant be set to 1776x1000i
What will this guide do:
allow you to play the vast majority of D3D Games at...
Hi!
I've recently written a guide on setting up custom resolutions on the ATI HDTV Adapter whic a lot of people didnt know you could do! The vast majority of people are limited on resolutions, get virtual desktop and it can become fustrating...especially for gaming!
Well The guide I have made...
Ok Could overclock the 1.6a to 2.4 but could not get it to boot in to windows. Couldnt get it to go in at 2.13 either....and was unstable still at 1.6 :(
ok Now I'm just talking to myself but I just updated to bios revision 1.3 and now the idle temps are at 98-100 F on a Celeron 2.0 Ghz ........thats a good sign I guess it keeps going down with each bios revision......
On a side note I was able to take this CPU to 2.6 with this bios revision and...
OK Now I know this has to be a problem with the temp sensor on board. I just took one of the first 865pe neo2-ls boards we got in at work and stuck in a celeron 2 ghz it is sitting idle in the bios reading 116-118 F IDLE!!!
The bios revision on this board is version 1.1 the one on my board is...
What about this board?
Gigabyte GA-8IPE1000L
Think it would be or do any better that the MSI Board?
I'm limited in the boards I can get through my work :)
Bump to see if anyone else has this problem, I've posted on MSI support forums and one of the Mods replied back wanting full system specs, lets see what he says lolMSI Support thread
I got the board and had nothing but probs
ddr 333 only worked at 266 when it worked.
And my 1.6a which ran at 2.4 fine barely ran fine at 1.6 :(
Havent tried 1.3 but it came with 1.2 that said fixed problems with some system that would not overclock and it still didnt appear to work.
anything higher....anything higher than stock it doesnt post. Temps are normal and all seems fine at stock speeds except when I boot in to windows it'll reset itself.
Again though with the p4b 266-c I had it at 2.4 with vbery very little temp diffrence
Ok why cant I overclock my p4 1.6a that was on a asus @2.4 with 512mb 333mhz ddr??
I have tried to down clock my memory but didnt seem to help. Tried increasing voltage to both memory and cpu with no luck. Tried manually adjusting the pci and agp down. Plus in the bios it only allows my memory...
I dealt with electronics years ago but since have fogotten quite a bit but would like to pick up as much as possible again. I found a great program online that letsyou create circuits and use a virtual ocsilioscope and multi meter but it is in russian so that doesnt do me any good :(
I rememeber...
no all conections seem to be fine as I said I can swap out the hdd with a win98 setup or a win me setup and all runs flawlessly. Even when no drives are mapped still takes forever in xp to log on. Once on everything seems to be fine navigating the network resources seem to be a bit sluggish but...
Anyone know any fixes for this? I have done clean installs on two machines to try and get this to go faster. The windows XP Machines take waaaaay to long to log on to a windows 2000 server (w2k setup using active directory). Yet windows ME and 98 have no problems at all. Tried different nics and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.