Search results

  1. C

    460W: overkill?

    I got the TP 550 today and it seems to run fine. However, I'm reading very low voltages 11.3 4.8 2.9 1.5 However, I don't have any stability issues (yet?). 2.9 vs 3.3 seems especially low. What do you guys think? Athlon 64 3400 (205 FSB for now), 2xRaptor SATA, 1xIDE, 1xCDROM, ATI 9700
  2. C

    *** Official EPoX 8RDA/+ (nForce2) Thread ***

    How do you know that these are good/no good types of memory (I mean where did you get the info from?) I learned from my own stupid personal experience that ValueRam 2700 and TWINX512-3200LLPT are no good.
  3. C

    Epox 8RDA+ and Kingston Value Ram...Be Careful!

    Also, I found another weird thing about this board. I disabled the "APIC Mode" feature in "Advanced BIOS" and WinXP simply stopped booting up! WHY?!!!!! It freezes on the mup.sys if I try to launch it in safe mode... According to EPOX's manual APIC is supposed to provide symmetric...
  4. C

    Epox 8RDA+ and Kingston Value Ram...Be Careful!

    So this review site discovered something that I knew for the last two weeks. 8RDA+ is WEIRD!!! These guys are describing my situation exactly. So 8RDA+ doesn't work with Kingstom ValueRam 2700, it doesn't work with Corsair XMS 3200LLPT. What the heck?! Link to Ninjalane article You may have...
  5. C

    Epox 8RDA+ and Kingston Value Ram...Be Careful!

    I do not overclock at all. It works fine with the expensive memory, but the pain to find that sweet spot where it works at all is INSANE!
  6. C

    Epox 8RDA+ and Kingston Value Ram...Be Careful!

    I think you might be right....
  7. C

    Epox 8RDA+ and Kingston Value Ram...Be Careful!

    OK, I picked up 2x256 Corsair XMS 3200LLPT (freakin' 180 bucks). Well, the ONLY way this memory runs on my board is at "By SPD Timiing" and Optimal settings. THAT'S IT. When I try to set up things manually - EXPERT - I get NO POST, can't even go to BIOS. This is insane!!!
  8. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    Stock retail AMD cooler. 1.775 vcore, 2.77 vdimm. CPU temperature hovers in the 50-55C range. Is that high?
  9. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    It's supposed to run at 11x. It runs solid at 11.0, 11.5, 12.0, 12.5, but that's it :(( wah!
  10. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I can set a multiplier to ANYTHING. But the system does not POST at anything over 12.5
  11. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    Does anyone know why my Barton refuses to run at anything over 12.5 multiplier?
  12. C

    Finally happy with my EPoX 8RDA+

    What really makes me NOT want to RMA the board is the built-in sound chip. OMG, what a great sounding setup (with my Klipsch 2.1 speakers).
  13. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I've got a Barton 2500+ and it absolutely refuses to run at anythyng over 12.5x I'm pissed :))
  14. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I think I'm going to get a pair of XMS 3200LL sticks from newegg. Then we'll see :)
  15. C

    Finally happy with my EPoX 8RDA+

    yes. it works with a 330 build. 155x12.5, 155 RAM seems to be stable
  16. C

    Finally happy with my EPoX 8RDA+

    OK, that was simple. I had an older build (300) and a newer build (330) is working OK
  17. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    well, I'm trying 153x12.5 FSB + 153 RAM - seems to work, but I'm not sure how reliable it's going to be (my 3DMark 2001 SE doesn't work anymore :)
  18. C

    Finally happy with my EPoX 8RDA+

    Well, I installed a DX9 thingy from Microsoft and 3DMark2001 SE stopped working. Here's what it says: Application info ---------------- Name 3DMark2001 SE Build 300 Error log --------- DirectX8 not installed.
  19. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I didn't see the codes - my BSOD was turned off - autoreboot. My system would not work with any stability even at 139 RAM. WHAT IS THAT?!!! GODDANGIT!!!!
  20. C

    Finally happy with my EPoX 8RDA+

    Tao, doesn't 3DMark 2001SE require DirectX 8.1? And you "12,000+ setup" shows DirectX 9.0. How did you do that?
  21. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    gotcha re BSOD. Infineon HYB250256800BT-6 chips BTW, my barton runs stable at 12x166 (Barton 2800+). What is the highest acceptable CPU temp for Barton?
  22. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    OK, flashed the latest BIOS - didn't help at all.
  23. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I use 30.82 right now and at 133 RAM they seem to work OK so far. also, 21.88(?) worked OK at 133 RAM and was unstable at 166 RAM. With 4x.xx my system WOULD NOT even boot into Windows at 166 RAM. Oh, and by the way, I have not seen ANY BSOD's at all - my system would simply reboot. I also...
  24. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    Tao, you mean you WOULDN'T give up on Barton/nforce2 board?
  25. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    Did you try to play with timing on that memory? What are the "Kingston-recommended" timings? I'm seriously thinking about returning the whole setup to newegg if I can't find a solution within a week or so...
  26. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I tried to install 41.09 nvidia drivers and windows would not boot up again (even at 133 RAM, 1.775 vcore, 2.77 vdimm). What is that? I'm not even trying to overclock anything. I just want to have my brand new board to work at a prescribed speed - 166 FSB, 166 RAM, etc. This is the weirdest...
  27. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I was following that thread and my only conclusion is that I probably should blame my RAM? 3DMark2001SE freezes on the second test with RAM at 166 and passes the test (ever so slowly) at 133. Should I return my RAM to newegg?
  28. C

    EPoX 8RDA+, Barton 2500+, 2x512 Kingston Valueram 2700, GF3 Ti 200 - UNSTABLE!

    I guess the subject tells the story... The system is extremely unstable under Win XP - random reboots, weird problems - for example I can't install my joystick drivers. Also, new nvidia drivers (41.09 or 40.72) for the video card kill the system - windows would not start up, so the only way I...
  29. C

    PNY GF3 Ti200 + IWILL KK266 (VIA KT133A) - NO GO

    The card works great _IF_ I can start the computer :) No stability issues whatsoever. It usually boots up OK after a long time off, but if you shut it down and try to power it back up - no dice... It only happens with the PNY, ATI works great :~(( Should I return the card maybe??
  30. C

    PNY GF3 Ti200 + IWILL KK266 (VIA KT133A) - NO GO

    OK, here's the deal. I got my new PNY GF3 Ti200 last night and it seems to work great. However, I started to have this weird problem. My computer wouldn't boot up! I mean, I turn the power on - both CPU and video fans start spinning, CDRW and DVD start blinking (but wouldn't open if I press a...
  31. C

    ATI 8500 from avlogic.com

    I called avlogic and the guy seemed to be convinced that their "White Box" 8500 is identical to a retail version, except there's no software, manual, etc. But he didn't sound too knowledgeable :) Did anyone buy that card from those guys??
  32. C

    ATI 8500 from avlogic.com

    OK, so what you're telling me is that that "White Box" thing is a sham :) I'm thinking Ti200 is the way to go...
  33. C

    ATI 8500 from avlogic.com

    Oh, and another question :) Should I get that ATI 8500 ($175) or a Gainward GF3 Ti200 ($151)? OS:Windows XP Apps: MOH:AA, Aces High, OFP, UT
  34. C

    ATI 8500 from avlogic.com

    Those guys have a "White Boxed" ATI 8500 for $175. This seems very low and kind of suspicious. Does anybody know if it's a fully featured card with no manual or is there some sort of handicap to it?
  35. C

    Future Power 400 W Case

    Is this thing any good? I want to put my Athlon 1.13->1.2 into a new case. Would this case be enough for faster Athlons?
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |