Search results

  1. V

    Question Genoa builders thread.

    SP5-M99 cooler is available on Ali and it costs 50% more than M97/M98 price(~124USD), which, I think, is quite too much: Also saw it in Australian Amazon but it's out of stock in there: https://www.aliexpress.com/item/1005006486419017.html...
  2. V

    Question Genoa builders thread.

    Iketh My work and negotiations with Martin(HWInfo64 developer) produced results. New beta build 7.69 Build 5340 fixes our issue according to AMD's SMU related changes. The Prochot, however will still be triggered and this is probably AMD's issue related to the same change of Tctl offset not...
  3. V

    Question Genoa builders thread.

    KanoPal I can't tell for all board models, but most of them require Micron,Samsung,Hynix or Kingston modules - each board shall be verified with its own QVL. Those manufacturers produce server grade modules(RDIMMS,LRDIMMS,UDIMM+ECC) and thus all server vendors(mobos/built systems) use and...
  4. V

    Question Genoa builders thread.

    So, after almost month of uptime and nearly 2 hours before planned MTC(Installed Windows updates on VM's and started host updates preparations) I've got another crash(LOL) - So close to the normal reboot... The crash caused restart again(Not BSOD) and the system was in strange state - Drives...
  5. V

    Question Genoa builders thread.

    So, I've had another crash(Just a reboot without any SEL/IPMI entries). This time I replaced my NF-A14 with it's Industrial counterpart which has higher min RPM, to fix the issue of IPMI going mad and constantly warning about low RPM of FAN3(Even if its above the set minimum of 140) and now they...
  6. V

    Question Genoa builders thread.

    Markfw I know. I remember the story quite well, with the Alibaba seller at the time with the first M97. Thats why I didn't provide any links - the point of the message was about future availability of M99 in general and that some sellers, at least informed about the new model, and stocks are...
  7. V

    Question Genoa builders thread.

    Iketh Meantime I've ordered M98 Air and Silverstone's AIO. Passmark got back to me with the following reply: And a testing 10.6 Build 3004 build. I'm, however not in mtc window now, so can't shutdown yet. It will probably take until components arrival or another crash(Tfu-tfu-tfu), or...
  8. V

    Question Genoa builders thread.

    Iketh I tried to generate one a week ago, however in my case it doesn't export anything for the 'Sensors' category, so I can only export main computer information, and without Sensors its useless for our issue. My case can be a little more complicated, oooor may-be even somehow related, because...
  9. V

    Question Genoa builders thread.

    Iketh Ok, I just didn't managed to find anything by Googling, unless it's on closed forums. It's the mentioned previously XE360-SP5? I'm little skeptical about its quality right now. Give us, pls, some feedback after 1y of runtime of this one :) Yep, Similar to my case with this BIOS, but...
  10. V

    Question Genoa builders thread.

    StefanR5R :laughing: I needed the Inception vulnerability protection(In the firmware, due to Windows which unfortunately doesn't have normal real-time firmware updates like Linux, and WU can get late by months/years) so 1.5+ was needed for me anyway. Also one of changes was fix to sometimes...
  11. V

    Question Genoa builders thread.

    Markfw With BIOS 1.6, booting into Memtest86 ISO/USB, even without starting test(Just go into System Information), so the system is actually idle - It will show 95-100 degree Celcius temp. Will show 115-117 after load. In earlier BIOSs(<= 1.5) it was fine(40-50 in my case). Also I suspect that...
  12. V

    Question Genoa builders thread.

    Trotador22 Thanks, while many of links point to M97(You can know it by '5 pipes' in description), there are indeed 2 sellers with M98 cooler. No signs of M99 through, which has Fans rotated 90 degree(I.e going across the long side of the socket) allowing for horizontal airflow direct front...
  13. V

    Question Genoa builders thread.

    Markfw I have only standard screwdrivers, unfortunately, for manual screwing w/o torque control, like used for consumer CPU coolers installation(And even then first installing I didn't have full T20 screwdriver and took a bit for it from a friend - It was short, so it was extremely hard for me...
  14. V

    Question Genoa builders thread.

    Markfw Yep, The Micron's 2R 32GB modules and their Smicro rebranded versions(So a mix of original Micron's and Smicro's rebranded version of the same module). So original compound is not highly degrading within first 6-8 months. Maybe my problems have to do with running for few months with SP5...
  15. V

    Question Genoa builders thread.

    Long time I didn't came here. So I've reached 1 month+1 weak of stable run and then got another uncorrectable ECC error. Then I screwed a heatsink a little more(Memtests passed again). Afterwards I had week only of stable runtime. I've discovered new BIOS 1.6 for my H13SSL-NT, and it's a little...
  16. V

    Question Genoa builders thread.

    StefanR5R I know about this option. I have it set to 30 and it drops me out in less than 5 minutes(SMicro software bugs :)), didn't tried 0 however :) You are doing everything right. I've looked at the password input element handling code. function turnOnPwdStyle (o) { ... else if...
  17. V

    Question Genoa builders thread.

    Markfw Looks like I was right. Both HEDT and PRO TR 7000 versions use the smaller SP6 like socket(TR5). And our SP5 remains outsider... Siena owners will be happy... https://www.techpowerup.com/314920/noctua-announces-cpu-coolers-for-amds-new-threadripper-and-epyc-processors
  18. V

    Question Genoa builders thread.

    Meantime after 30d of running stable(Finally), I've reached maintenance window to apply updates and tried to replace the 2-nd USB controller(USB 3.0 one) with the third one from Startech(USB 3.2 dual chip w/o hub) and it works as well with BIOS 1.5(I see PCI PERR's during boot though). Currently...
  19. V

    Question Genoa builders thread.

    Markfw Nearly exactly. All SP6 CPUs will have 8 channel memory, but not only this. Actually first rumors talked about the 96 core TR and mentioned it will use SP6 socket(Not the SP5) - We will know for sure within 2 weeks as official announce is close. Epyc Siena is easy to fit into smaller...
  20. V

    Question Genoa builders thread.

    Markfw I think sTR5 is the expected name for upcoming TR 7000 Pro socket, which is just SP6 clone for TR. Nope, Bergamo is SP5, like our Genoa. SP6(LGA-4844) will house the incoming Epyc Siena(8004) with Zen4c cores and 8ch memory controller. Like on this mobo...
  21. V

    Question Genoa builders thread.

    It was mentioned in the source article: Personally I saw it on spanish Amazon, here...
  22. V

    Question Genoa builders thread.

    Markfw I've just added fixing comment in the original message regarding Antec(Unfortunately), self quoting:
  23. V

    Question Genoa builders thread.

    I've had some stability problems for 1-2 months, which possibly caused by RAM seating(But memtest always passing, and memory corruption BSOD/SEL entry occuring after a week or two). So after fully reseating all DIMM modules I decided to try BIOS update again(This time to v1.5), but was prepared...
  24. V

    Question Genoa builders thread.

    Didn't had updates for a while. So, almost every SlimSAS to U.3 cable is not compatible with Areca RAID(And I think LSI/Broadcom too) then attached to U.3 drive. Example of cable which will not work with U.3 drive(But will with SAS/SATA): https://www.ebay.com/itm/295675605354 However, SlimSAS...
  25. V

    Question Genoa builders thread.

    Markfw Is it 'scratching metal' noise of radiator or vibration noise of Fans over the radiator due to loose springless holders connections?
  26. V

    Question Genoa builders thread.

    Update from my workstation side. Yesterday I did a mistake which took me hours to recover from. Supermicro released new BMC (...0.18) and BIOS(1.4) for H13SSL-NT. While BMC is still same buggy *, the BIOS update ended in a complete disaster, forcing me to disassemble fans and cards(At least not...
  27. V

    Question Genoa builders thread.

    Markfw I think it will be quieter at its 100% fan speed, than the second one at 50%, through it's relatively noisy at its pick 2200RPM. Otherwise its dead silent. I would prefer the radiator base to be larger and higher but they targeted the whole system to be almost not more than a socket...
  28. V

    Question Genoa builders thread.

    Yesterday the Smicro rebranded RDIMM modules arrived. Their color is different(swamp green) from the one of the retail Micron modules(normal green). The model name in BMC is the same, slightly newer lot by serial numbers. Passed 4 memtest passes(w/o Hammer) and 50% of single Hammer run(I didn't...
  29. V

    Question Genoa builders thread.

    Markfw I've got the Smicro compatible Micron 32GB 2R RDIMM modules. The first 6 are retail by Micron, the new 3 from Newegg are same model rebranded by SuperMicro(Still waiting for them). Micron part#: MTC20F2085S1RC48BA1R I've selected it out of 3 compatible options(By Micron, Samsung and...
  30. V

    Question Genoa builders thread.

    I had some instability of the system during first week of migration - caused by bad RAM stick, as shown by BMC. It passed the first pass of Memtest86 but failed the second one(Errors on Terst-5 and Reboot on Test-8 or 9, Also shown in BMC as uncorrectable ECC error). Now running stable in 'odd'...
  31. V

    Question Genoa builders thread.

    I've reduced the thresholds using ipmitool ... sensor thresh FAN* lcr 200 for FAN3,FAN4 and FANA, which reduced em to actual 140. Those all are 120mm case fans. The system stopped ramping-up|down the main 120mm CPU fans on FAN1-FAN2 after I've reduced the threshold for case fans. Now the system...
  32. V

    Question Genoa builders thread.

    Hey ppl. Long time passed as my RAM was stuck @customs and I was also waiting for the CPU longer - The CPU was the last part of the puzzle, but was worth it, via local store/supplier with warranty. While my original PCI-E cards composition plans had failed(As 2.5 desktop slots are 3 server...
  33. V

    Question Genoa builders thread.

    Congrats on the new, working CPU, Markfw :beercheers: I think the smaller cooler is too small even for 24/32 cores, let alone the 96 code behemoth. Probably backed-up by rack's fans - the secondary jet engine :) If I remember the specs correctly, this fan is able to ramp up to 11000RPM at full...
  34. V

    Just got a 9654 Genoa ** Motherboard /ram/heatsink/CPU are here !!

    StefanR5R They mentioned that their test wasn't quite bandwidth bound, and mentioned they expect larger differences for more intensive tests. Whats quite interesting question. I think there are debates about it every Epyc/TR release of how amount of CCDs will balance with memory controller. I...
  35. V

    Question Genoa builders thread.

    Thibsie Unfortunately it's always the same for all public schools in all countries. No budgets, no money and recently more cuts due to inflation... I still remember everyone trying to catch the single PC in the library to surf the web and download stuff to the floppies with WinZip/WinRAR, as...
  36. V

    Question Genoa builders thread.

    Oh well, I'll post my planned config as well. Case: Corsair 1000D SuperTower and 8 fans MB: Supermicro H13SSL-NT CPU: Epyc 9274F 24 core Cooler: The larger heatsink with 2x120mm fans, manufactured by chineese CoolServer company. Memory: 6x or 8x 32GB Micron DDR5 RDIMM 2R modules. PSU: Current...
  37. V

    Just got a 9654 Genoa ** Motherboard /ram/heatsink/CPU are here !!

    Maybe they decided to get rid of the extra screws as integrator/builder needs to put the heatsink anyway, and it's pressure at the end always defined the cooling efficiency? Dunno. The locking mechanism looks very similar, except one main screw, instead of 3. The memory of Pentinum 2 Slot-A CPU...
  38. V

    Just got a 9654 Genoa ** Motherboard /ram/heatsink/CPU are here !!

    While I would like to hope, that they have internal secret project regarding new SP5 cooler which they can't talk about, but I'm just being realistic here... When companies released PC coolers for server sockets? Actually, almost never. The only recent times we saw it happen was because...
  39. V

    Just got a 9654 Genoa ** Motherboard /ram/heatsink/CPU are here !!

    Markfw I hope the new one will work. My CPU will probably arrive only next month. :confused: I've also ordered Noctua NF-F12 iPPC-2000 PWM and Noctua NF-P12 redux-1700 PWM, in case I'll decide to replace their stock fans. Still, if the description is fully correct and stock fans peak at...
  40. V

    Just got a 9654 Genoa ** Motherboard /ram/heatsink/CPU are here !!

    I'm not yet sure if CPU or Mobo is faulty. Would be worth to try another DIMM in main slot and alternatively some other slot, to allow hwinit procedures on the mobo to go further in case of bad DIMM(It can sometimes stuck before detecting other hw), while clearing the CMOS to reset it before...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |