Search results

  1. I

    Outpost/Frys: 512MB PC4000 Geil DDR $79.99

    How high (fsb) can this baby goes.
  2. I

    MSI nForce4 Neo4 "Ultra" owners - what ram are you using?

    Cosair value select
  3. I

    neo4 and dividers

    Oh well, I dont know what to say. Probable you have a faulty board.
  4. I

    neo4 and dividers

    dimitris, I am pretty sure that devider 166 works > 240 because I tried 260 fsb with devider 166 and it worked. Did you change your cas to 2.5?
  5. I

    neo4 and dividers

    try to change your Cas Latency to 2.5. Neo4 does not like my value select to run at Cas Latency 3. When I set my cas to 3, Board would not boot at all. I dont know why. I am using cas 2.5. Try to relax you mem setting a bit. Once you get your devider to work, then try to optimize your mem, bit...
  6. I

    neo4 and dividers

    Hi dimitris, After I set my mem setting to tras=10, trcd=6 and trp=6, i was able to use divider 120/0.6, 133/0.66, 140/0.7, 150/0.75, 166/0.83 and 180/0.9. I did not know how the mem setting could affect the devider but it worked for me. Thus, I am going to stick with 10-6-6. Try 10-6-6 and...
  7. I

    neo4 and dividers

    scoobydoo Thank you so much for your tip ((FSB x HTFreq) has to be around 1000MHz). That really help me a lot. After I read your post, I took out my calculator and started to so calculation. Now, I could not be happier with my setup. Thank you very much !!!!!!! my setup FSB: 330 CPU...
  8. I

    neo4 and dividers

    I was trying different memory setting this afternoon. I figure out that if I change the 3 memroy setting in the bios, it allows me to to change the diverder without any problem. They are tras, trcd and trp. I had them set to 10-6-6 and my devider started to work. I have the bios 1.1 as well...
  9. I

    neo4 and dividers

    arswihart, I set the devider to really low to see how high i can go with the fsb. Jeraden, what is the version of your bios? Thanks
  10. I

    neo4 and dividers

    Hi dimitris, I have exact same proble with Neo4 as well. I decreased my mem to 133 (i have pc3200), decrease my cpu multiplier to 7, increase fsb to 240. NO GO !! I dont know what is the deal. In my case, I am not overclocking the memory or the cpu. I dont know why it would not work. Anyone?
  11. I

    Does the XP-120 heatsink work on VNF4 motherboard?

    I would like to know as well. Anyone?
  12. I

    Best place to buy PS2 mod chips?

    Thank a lot guys. I will go with no-swap.
  13. I

    Best place to buy PS2 mod chips?

    I an new to console. May I know what is the pro and cons for swap and no swap. Please help and thanks in advance.
  14. I

    And so commencement is over...

    Congrat !!
  15. I

    hmm neweggers think tom's hardware > AT , ATOT EFFECT NEEDED

    Me too...Me too, one more vote from me !!
  16. I

    eCost: Infinity Entra Two center channel speaker $94.95 free shipping & entra 3 tower speakers 133 each!!

    Infinity makes good speakers. Entra three is great budget speaker (crystal clear high and tight bass). You should listen yourself at your nearby circuitcity. just my 2 cents.
  17. I

    New CompU$A in Frisco TX: (a few) 1st day deals

    Thanks a lot Angrymarshmello !!!!
  18. I

    New CompU$A in Frisco TX: (a few) 1st day deals

    Anyone have the address ? Thanks
  19. I

    Hottish? SonyEriccson T68 for $169 w/1 Year cntrct. Portland + Chicago + more.

    Opps...i missed the key word. Thanks a lot.
  20. I

    Hottish? SonyEriccson T68 for $169 w/1 Year cntrct. Portland + Chicago + more.

    I am going to sign up ATT gsm too. Does anybody know when will the T68i be available? How do you do the firmware upgrade. I went to erricson's homepage but I could not find any formware upgrade... Thanks in advance.
  21. I

    apex 3201 49.99 after 30 rebate at Compusa 4/7 -14

    Thanks a lot Yoshi2000, Unfortunately, I upgraded the dvd drive's firmware and the dvd player's firmware did not solve my skip problem. :(
  22. I

    apex 3201 49.99 after 30 rebate at Compusa 4/7 -14

    I have problem when playing svcd twiced in a row (after eject and close the cd tray again). Anyone has this problem ?
  23. I

    80 GIG HDD on ABIT kt7-a... gives me only 7.85Gig

    I bet you are using fdisk. Dont use fdisk. Use the utility that cmoe with your hdd.
  24. I

    Woman in Corporate Parking Lot Pulled me Over! UPDATE! She Was Reported!

    I just love ATOT. All kind of funny stories everyday.....cheers
  25. I

    Crucual memory good OCer?

    Crucial PC2100 DDR at 152@cl2
  26. I

    Why Yelling At a Man Doesn't Work

    Good one !!
  27. I

    why do i fall for guys who treat me like dirt?!

    << did you know that if your hand is bigger than your face it means you have cancer? >> LOL I learned a lot from this thread. I will start calling ladies around me b*tch and treat them like sh*t.
  28. I

    Muslim Woman Sues Florida Over Veil [UPDATE] Florida courts *reverse* the decision

    << Sultaana Freeman, 34 >> Wowow, she is 34 years old already? That must be a typo (her thinking was like a kid) or she did not go to school. Religion is religion, law is law. Everybody has to follow the law no matter what relegion he/she believes in. There is no exception !! She had mixed up...
  29. I

    Dang, my little girl is all sick today :(

    Good luck to her and hope she recover soon
  30. I

    Alpha Heatsink on Epox 8KHA+

    I have alpha 8045 sitting on my epox 8kha+ now. Dont worry, no mod is needed. It fits perfectly fine on the mobo.
  31. I

    How low is too low for the 5v line???

    My 5v goes down to 4.57..... but my system is stable.
  32. I

    Epox EP-8KHA+ vs SOLTEK SL-75DRV2 (Purple Ray Ver.)

    epox 8kha+ is the fastest mb i ever had.
  33. I

    Who wants to explain this FSB issue?

    Basically, your fsb = what you see on the screen / 2
  34. I

    what is the best ocing core for xps right now?

    << well i heard that all the xp 2000+ are all agoga cores >> I dont know whether all xp2000+ are AGOGA cores but here is a Pic for you..
  35. I

    Please help, is my memory holding me back?

    Why dont you set your ram to 100 instead of 133. Then, if it still does not work, you know is not because of your ram.
  36. I

    what is the best ocing core for xps right now?

    I think is AGOGA. But really depends on your luck. Good luck.
  37. I

    Epox 8KHA+ or Soyo Dragon+?

    Another vote for epox 8kha+. It is really stable and fast.
  38. I

    Updated:If any of you know Who Superdell is, you might find this funny...Totally Awesome Computers email conversation...

    R&D ? LOL What kind of R&D? He is so full of sh*t...heheheheh....spent thousand of dollars and developed/invented nothing...and he called it R&D.....
  39. I

    XP 1700+ AGOGA - anyone got one recently

    I order a 1700+xp two weeks ago and it was not AGOGA.
  40. I

    Happy Birthday, Lord Maul!!!! UPDATED WITH GRAPHIC!

    Happy Birthday..
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |