Search results

  1. M

    Next-Gen LCD monitors?

    Anyone know when the next Gen LCD monitors are gonna arrive? Should I wait or buy an LCD now? I stole my little brothers monitor and he's kinda pissed about it :)
  2. M

    Will Prescott 2.4A fit my mobo (BD7-II) ?

    Please help :) Want to overclock that pup... my mobo's voltage runs from 1.5-1.65v (prescott spec'd at 1.4v) and it's also 533fsb which my mobo supports... and no hyperthreading as well... seems like the perfect upgrade !
  3. M

    NEC 1760NX vs Viewsonic VP171?

    Any recommendations? Comments will be appreciated. Cheers, maxxy
  4. M

    Destroying my CRT monitor...

    I would one go about destroying monitor without opening it up? I heard something about running at high refresh rates... Is there any ways to burn pixels? :) Please help my curiousity...
  5. M

    DVI? What's the difference... Please advise!

    Hi, What's the difference between VGA and DVI? What about this DVI refresh rate thingy? I see some DVI that can support 60hz and some that can support up to 75hz... And regarding interpolation, why don't some monitors just scale the window size to a smaller size so there is no interpolation...
  6. M

    SCSI - What kinds? Do I need it?

    Dear Anandtechers, Im intending on getting me a new rig and I was wondering if SCSI is the right choice for me? How much better are they than IDE drives? How well do they perform against the WD 80GB 8mb drive? What about against IDE RAID? What about noise/heat/reliability issues? Which are the...
  7. M

    HELP! Can my motherboard support this?

    Hey all, I currently own an Abit BX6r2 mobo (440BX chipset). It has a max clock multiplier of x9 and supports 66/100mhz FSB, and a voltage of 1.3v to 2.3v. I also have a new generic PSU of 230W. I would like to know what is the best CPU that I can buy for this mobo. Is it a celeron 900mhz or a...
  8. M

    HELP! Can my motherboard support this?

    Hey all, I currently own an Abit BX6r2 mobo (440BX chipset). It has a max clock multiplier of x9 and supports 66/100mhz FSB, and a voltage of 1.3v to 2.3v. I also have a new generic PSU of 230W. I would like to know what is the best CPU that I can buy for this mobo. Is it a celeron 900mhz or a...
  9. M

    I will NEVER buy IBM HD's EVER AGAIN.

    Well... just finished ghosting HD to HD... the replacement HD (which was refurb.) is much more silent then the crap that I bought (the 2nd HD)... arg.. gotta RMA this one too.. diE iBM.. how can I company that makes so much and has a reputation to uphold give this kind of service? I mean...
  10. M

    I will NEVER buy IBM HD's EVER AGAIN.

    Hey folks... Just thought I'd like to rant a bit about the crappy HD's and service that I recieved from IBM. I purchased two IBM 60GXP 40gb... one after the other (not at the same time). Anyways.. the first one had a scarey "click" noise so I RMA'd it and recieved another HD... with a...
  11. M

    Oh... my IBM Hardrive woes...

    win2k
  12. M

    Oh... my IBM Hardrive woes...

    Mitzi: did that, everything was fine. fow99: Symantec Ghost 6.5 Cheers.
  13. M

    Oh... my IBM Hardrive woes...

    Hey guys, I purchased an IBM 40Gb 60GXP 6+ months ago, and since then it has been giving these clicking noises (like seeking noises, only louder) when accessing a certain section in the HD. Other than that, it was dead silent. Now, after contacting the IBM tech support they told me to return...
  14. M

    Tweak3D KT266A Tweak guide...

    Anyone tried this thing out? KT266A Tweak Guide I wonder if it really works and doesn't affect CPU speed/benchmarks/stability... Sincerely, maxxy
  15. M

    How do I tell if my CPU or Mobo are dead?

    Chipset: Speaker is connected fine. Tried both ways and still nothing works. Reseated the Vid card, RAM and cleared the CMOS... same thing. veryape: monitor works 100%. The system is homebuilt.. I bought all the parts and put them together... Anyway.. some more info Athlon XP 1600 Epox 8KHA+...
  16. M

    How do I tell if my CPU or Mobo are dead?

    Hey, just bought a new rig.. and the computer powers up but doesnt send anything to the monitor.. I know for sure that the GFX card works.. so my question is... how do I know if my CPU is dead? or if my mobo is dead? there PC speaker doesnt even beep... and the Epox LED shows FF (which means...
  17. M

    HELP!!! Epox 8KHA+ Won't post!

    Hey... after twiddling with the epox and finally gettiing it to actually load up then now it wont post! I stuck only CPU/gfx/memory in it... and the thing doesnt beep either.. I get the "FF" in the LED on the mobo... and it says in the manual that FF can mean faulty mobo.. but it can also mean...
  18. M

    Gainward GF2Ti jittering??? Help!

    Hey, I bought a Gainward GF2Ti not too long ago and after sticking it into my machine, I get horizontal screen jitters here and there.. it's very noticable and annoying. I run a Celeron 400@450 with Abit BX6r2 with the Gainward's Drivers on 1280x1024@100hz (same thing still happens at 640x480)...
  19. M

    Need help with my Gainward GF2Ti

    Hey, I bought a Gainward GF2Ti not too long ago and after sticking it into my machine, I get horizontal screen garbles here and there.. it's very noticable and annoying. I run a Celeron 400@450 with Abit BX6r2 with the newest Nvidia Det drivers (not Gainward's ones) on 1280x1024@100hz (same...
  20. M

    Noob question... What is LAPPING?

    Hey guys, What's lapping? What good does it do? How does one go around "lapping" his HSF? Cheers, maxxy
  21. M

    Soltek KT266A mobo?

    lalalala bump.
  22. M

    Soltek KT266A mobo?

    *BUMP* :P
  23. M

    Soltek KT266A mobo?

    Hey guys, Is the article on Tom's worth a rat's toss? The Soltek and Soyo boards are such good competitors? Anyone have the Soltek board? Is it stable? and what the hell is that Red Storm overclocking thing-a-majig... Cheers, maxxy
  24. M

    Is my hard drive gonna DIE?

    Hey mates, I have an IBM 60GXP 40gb HD in my machine. Sometimes when the hard drive "seeks" then instead of the normal low noise *click* it makes then it makes a louder, more noticeable click. This has been happening since one month after my purchase of the HD, back in May. Is my HD slowly...
  25. M

    PLEASE HELP: HD not giving out correct reading of Free space

    Right... recycle bin... blah :) Anyways... it was the stupid Norton file protection thing... I disabled it but yet it wasn't disabled. Getting back 3gb of space is nice :D Thnx anyways.
  26. M

    PLEASE HELP: HD not giving out correct reading of Free space

    Hey all, I have a problem with my PC (running win2k). I delete, and I delete... and still it says 26mb free! I ran scandisk - didn't work. Ran norton disk doctor - didn't work. What am I supposed to do? Cheers maxxy
  27. M

    512mb RAM - Can I use it?

    Hey guys, I was wondering if I can use a 512mb DDR PC2100 ram chip in today's mobos without problems? or must it be ECC or something like that. Cheers, maxxy
  28. M

    IDE Raid - How good is it?

    Thanks a bunch... After reading this I've decided to save my money and not go with IDE raid if the performance gain isn't going to be substantial. 512mb ram enough for today's programs?
  29. M

    IDE Raid - How good is it?

    Hey guys, I am currently thinking of upgrading my system to an AthlonXP system and I want to know if IDE Raid is THAT much of a performance gain? Will games run faster? Will photoshop run THAT much faster? Is it worth the 100 uk pounds more that I will need to spend in order to get it? Cheers...
  30. M

    mixing PC66 and PC100/133 DIMMS

    Depends on the FSB of your CPU... if it's 66mhz then it can run PC66. What's the CPU?
  31. M

    Identifying IDE cables...

    Hey all, Was wondering how do I differentiate between the IDE cables? ATA33/66/100? Cheers.
  32. M

    IBM 60GXP Clicking! please advise..

    Hmmm... come to think of it... this never started until I added my WD 10GB to it as slave... could be the reason?
  33. M

    IBM 60GXP Clicking! please advise..

    Hey all, I have a 40gb IBM 60GXP... and it works fine.. speeds are great.. so is the silence.. except for some random clicking that I hear like once a day... at random occasions. First I associated this to spinup/spindown but it happens even when the HD is working away. It doesnt cause crashes...
  34. M

    "Master Partition Sector Invalid" Please help me fix this...

    Hmmm.. try running this in dos: fdisk /mbr MBR = master boot record... give it a whizz.. if that won't work... R.I.P hd.. Cheers.
  35. M

    Power supply reason for all my problems?

    Hey, I have a 230W PSU (pretty sure) and I have the current problems: 1. after I load my PC (or it's been in power savings mode) then my monitor doesnt restore to its full size (trinitron 19"). It takes a good half an hour until it is full size. 2. My optical logitech mouse flashes all the...
  36. M

    Most Overclockable GF3?

    From the limited number of GF3's out there... what's the most overclockable one? And on what system (P4/AMD)? Interesting to know...
  37. M

    Voodoo3 Refresh Rate Problems

    Hey all, I run Windows 98 and own a Voodoo3-3000. When I use the 1.04 drivers for the v3 then I can run 1280x1024 @ 100hz. When I install any newer version driver then all my refresh rates that were once beyond 85+ Hz are now limited to maximum 85Hz. This is REALLY annoying and I would like to...
  38. M

    Rounding up cables?

    Is there an online guide to rounding my IDE cables? If not, can someone summarize how this can be done easily and with no threat to the IDE cables...
  39. M

    Monitor "view" size smaller at loadup

    Yes, it happens to be a Trinitron monitor... Is this the case? Do I have nothing to worry about?
  40. M

    Monitor "view" size smaller at loadup

    I purchased an Iiyama Vision Master Pro 450 (19") almost 2 years ago, but ever since - I've had this problem that after I load up into windows then it's actual "view size" is smaller than my configed view size for that resolution. Only after 10-15 minutes does it slowly move back...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |