I just installed a DI-604 router between desktops with windows xp how can I configure it to transfer files between these 2 desktops . I have the internet working on both but have no idea where I can a step by step guide to sharing files between the two . Its for a small business. thanks Chas
My friend recieved a computer ( new) from a soldier in germany. she says she plugged it in turned it on and smelled smoke . I looked at the system and the pwr supply was set on 230 volt ( was plugged into a 110 outlet) upon further investigation I see that the fuse in the 300 watt pwr supply...
I am holding in my hand a befw11s4 which says wireless b broadband router however the same model on the net says Linksys BEFW11S4 - Wireless Access Point - 4-Port Cable/DSL Router the picture of the wap has more lights on the front and the wap says wen on the back not internet like the...
I installed an aureal 8810 soundcard on my system after disabling onboard sound but it does not auto detect the card at startup and I cannot install the drivers . I thought it would be auto detected by xp but it will not thanks Chas
would any pci sounmdcard such as tre creative pc1i 128 improve performance ( require less cpu cycles) than the on board acl650 sound I am considering getting a Sound Blaster PCI 128 PCI 128-voice Wavetable Sound Card thanks Chas
These speakers sell for up to $170- elsewhere I just bought a pair and mnice sound and stylish looking !
http://www.ecost.com/ecost/shop/detail.asp?dpno=131258
I downloaded sp1 for xp pro + the usb driver and am using an an35n ultra with usb 2.0 enabled in bios I still getr high speed device in non hi speed port message when I put my Kingston usg drive in the usb port thanks Chas
Hi guys hope u are all well . I am having a problem when I attempt to drag and drop or even copy any file to my mitsumi cd burner in win xp pro I get a message to the effect " windows encountered a problem copying this file what do you want to do?" I was able to in the previous install of xp any...
When I put the hard drive on IDE 1 and the cd on ide 2 I cannot boot ( says boot failure insert disc When I put the cd on ide 1 and the Hard drive on IDE 2 the system will boot fine
Anyone know why this is is there a problem running the cd rom on 1 and hard drive on 2 ?? thanks Chas
If I want my desktop running hardwired and a notebook on wireless what exactly would I need I have a cable modem Can you tell me specifically what to buy ? thanks Chas
but I want to keep my desktop on the hardwired cable modem ( modem is a 3com cmx ) is thete any way to have the wireless router and keep hardwired if so what do I need get thanks Chas
I am getting a series of beeps which go from high to low like do -dah do- dah and no post when I startup my p4 gigabyte ga-81dml does it sound like the cpu is done ?
This is a continuation of my saga attemptinmg to install an OS on a scsi system ( hayak XA) I am getting a message
symbios ID not found
PXE-MOF invalid message code
PXE-MOP erxiting PXE
Anyonre know what that means in englkish ?? thanks Chas
What or where would the scsi bios look like /be at . ? I wound up hooking a 2 gb hardrive with windows preinstalled on it and all works well . I may just go out and pick up a 20 gb drive and pull out the seagate scsi .. thanks to all ! Chas
Hi Sorry I am a pain I had win 200 delete all partitions ( it had its own scsi drivers) I then took out the disk and attempted to put in win 98 I will follow your steps now I am on the verge of a breakthrough but hitting f6 did not do anything Stay tuned pleeease regards Chas
Hi I do not have a windows 2000 strartup disc so I used a win 98se it loaded the cd drivers but when I typed D:/ setup with windows 2000 disc in it says no fixed discs present .
I have xp on cd with all the floppies should I try that ???
This system was from a network that my freinds wife...
I am attempting to format the drive of A HP kayak ka The drive is a scsi when I attempt to format it shows no C drive In the cmos It shows no hard drive What settings must I use to get the drive recognoized and formatted The system is no longer part of the netwoerk The ribbon cable goeds to a...
I am hoping to built a large flight sim setup using a 27 inch tv as a monitor with FS 2002 i si true it can be done wiuth a video out card would the resolution only be 640x 480 Any tips greatly appreciated Chas
I installed xp pro over an install of xp home all was well until I realized I did not have a powerdvd decoder So I put in the recovery cd which was ghost image something now I got xp home back my questions are What does that cd do Where did xp pro go Is my system F';4ed up now ? Thanks I A NEWBIE
ECS k7S5a SIS chipset uses both I built 2 and they are nice ( mobo is only around $52 bucks!!! I am runnibg an ahlon 1800 xp and Duron 800 on the other .
Someone I know owns an HP computer with an A7V-VM motherboard I went to install win 98 and now get 2 listings for gameport joystick in device manager and on for mpu 401 compatible( both have an exclamation mark ) and state there is irq conflict. I disabled both of them and it runs well . Do i...
HI and thanks I just joined paypal and am expecting payment on a $450 item I am concerned that once the $ is deposited in my paypal account the guy may pull out after I ship the expensive item . Do I have any cocerns here Is there any heads up I need to know with paypal when selling an...
I bought a PCI modem with ambient chipset which is owned by intel The modem is one of the new Intel® MD563X-HaM V.90 chipset(Host Accelerated Modem (HaM))which are supposed to be optimized touse fewer resources than the standard winmodem The price is right but was wondering what the general...
Leave the pad on took mine off and temp went up 1 degree celsius its also a bi**ch to get the HSF off Only time you should remove the heatsink is if it fails or you update the HSF . IMHO
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.