Search results

  1. G

    BSOD's in Win XP SP2 on new system (2 diff mobos, 2 diff video cards!)

    DFI NF4 Ultra-D mobo Athlon 64 3800+ X2 OCZ EL 2x512MB DDR400 memory EVGA GeForce 6800GS videocard Maxtor Maxline 250MB SATA drive OCZ 520W PSU This setup posts fine, I install Windows XP w/ SP2. All goes well it seems until I install the nVidia chipset drivers. Numerous BSODs ensue...
  2. G

    Intermittent black screens w/ EVGA 6800GS on DFI NF4 ULTRA-D

    Yeah I just might - I spoke too soon. Minutes after I hit the submit button, it rebooted and I was unable to boot back into windows w/ restoring a previous state. Recommend a stable mobo w/ decent features pls :)
  3. G

    Intermittent black screens w/ EVGA 6800GS on DFI NF4 ULTRA-D

    shimsham - thanks for your input. the system is brand new and the temperature is steady at 37/46 (mobo/cpu) here's an update: -reformatted/reinstalled windows. installed only Forceware (nForce drivers). Instead of momentarily hanging and giving me the black screen the system rebooted -...
  4. G

    Intermittent black screens w/ EVGA 6800GS on DFI NF4 ULTRA-D

    Hi, thanks for the suggestions. I'll try Driver Cleaner Pro. I tried moving it to the 2nd PCI-E slot but unfortunately the cable routing from the power supply inside the case (Antec P180) does not allow enough room to install the graphics card in the lower PCI-E slot. It could be done if I...
  5. G

    Intermittent black screens w/ EVGA 6800GS on DFI NF4 ULTRA-D

    I'm writing about some intermittent black screens I'm encountering with a new computer I just got. The specs are: DFI NF4 Ultra D motherboard Athlon 64 X2 3800+ EVGA 6800GS OCZ 2x512 DDR400 Windows XP /w SP2 It seems I'm getting them whenever I do something that requires a refresh of...
  6. G

    Weirdest, strangest goddamn motherboard problem I've ever come across (related to A7V333)

    Makes sense. However I don't think I've received more than 2 paper washers. Guess I'll be paying a visit to the hardware store. Thanks
  7. G

    Weirdest, strangest goddamn motherboard problem I've ever come across (related to A7V333)

    I got an A7V333 board today. As soon as I opened the box, I checked out the jumpers and I tried testing it out of the case only using the CPU, Fan, power supply, video card and a stick of memory. No problem, system posted. I then connected all my other devices (still on my desk) and tried...
  8. G

    urgent help needed w/ asus a7v333: "system failed cpu test"

    Well guys, it has been a nightmare story with no happy ending unfortunately.. I brought the card back to the store, and got a replacement. First thing I did was to plug in just the PS, CPU, HSF, memory and speakers. I *think* it posted (had no screen), just my speakers hooked up. I then shut...
  9. G

    urgent help needed w/ asus a7v333: "system failed cpu test"

    got this board today, tried it with my old T-bird 1.4 and it wouldn't post. I hooked up my speakers to the line out of the onboard sound and got the "system failed cpu test" message. I tried manually setting cpu speed via the jumpers, tried the jumper free setting, cleared out the RTC RAM via...
  10. G

    Which of these KT333 motherboards to get?

    It seems like the consensus here is that the Epox 8k3a is the board to get.. however I've been unable to find it in Canada yet and I have an emergency. Which of the following would you go for: SOLTEK SL-75DRV5 MSI MS-6380E KT3 ULTRA GIGABYTE GA-7VRXP ASUS A7V333 KT333 The ASUS is...
  11. G

    Can you name any Socket A motherboards with ECC DDR memory support?

  12. G

    LCD question: Planar 17.4" or Samsung SyncMaster 170T

    Has anyone had experience with both ?
  13. G

    Looking for a new monitor, but it seems now is not the right time to get one.

    Hey guys, thanks for your replies.. but I decided that I do not want to spend big bucks on another CRT monitor. So either I'll get something cheap and better than what I have (like a Samsung CRT) as a temporary solution until 16x12 native LCD's become more affordable, or I'll bite the bullet...
  14. G

    Looking for a new monitor, but it seems now is not the right time to get one.

    I've had my 17" Nec XV17 for 4-5 years now and I'd like to go higher than 1024x768 which I currently can't do (unless I settle for 60Hz which I won't). I really wanna go LCD, but it seems to me that 1280x1024 is awfully lo-res for an 18.1" screen. If I want 1600x1280, then we're looking at a...
  15. G

    Are the Swiftech's (dont have the model name handy) more quiet than the GlobalWin CAK38

  16. G

    Quick question.. good, cheap KT133A board for nonenthusiast

    Need to buy a Duron 850 system today for a coworker, and they don't have the KK266 in stock.. what would you recommend? Main concerns are stability, reliability and price. O/C'ing non issue. thanks! :)
  17. G

    Building system for my dad: AD11 good idea? (8k7a out of stock @ newegg)

    Out of stock
  18. G

    Building system for my dad: AD11 good idea? (8k7a out of stock @ newegg)

    Hey, I'm about to order parts for a new t-bird 1.4ghz system for my dad. I figured i'd get him the epox 8k7a motherboard, because i'm very satisfied with mine but it's not in stock at newegg.com which is here I'll be getting the system from, and he needs this system soon. He doesn't need the...
  19. G

    HDD Led on Antec SX830 not functioning..

    Thanks guys.. flipping it worked. I remember trying it when I set up my system and it didn't post. Musta been something else.
  20. G

    Direction of case fans on an SX830.

    Are the front fans supposed to be intake fans and the rear ones exhaust?
  21. G

    HDD Led on Antec SX830 not functioning..

    Hello.. I'm pretty sure I hooked up the HDD Led wire properly to my Epox 8K7A board, with the 0 pin aligned and all (the power sw, reset and other switches all work). I have 2 hard drives on the first IDE channel. Any ideas?
  22. G

    Antec SX830 + Epox 8K7A = IDE cable too short for slave CD-RW!

    Thank you
  23. G

    Antec SX830 + Epox 8K7A = IDE cable too short for slave CD-RW!

    Kinda sucks having to go mailorder from Canada for an IDE cable:) I guess I'll just have to keep looking around.. but so far all I've seen longer cables, but with the middle connector in the same place as the regular 24" ones.
  24. G

    Antec SX830 + Epox 8K7A = IDE cable too short for slave CD-RW!

    I have 2 Hard drives + a CD-ROM + a CD-RW. I have hooked up the 2 Hd's master and slave on the primary IDE channel using the ATA 100 cable, and I'd like to hook up the CD-ROM and CD-RW the same way using the regular IDE cable. The problem is that the middle connector on the cable doesn't quite...
  25. G

    Epox 8K7A drivers CD - worth installing?

    Thanks for your replies.. I installed the VIA drivers from the CD after which I got the latest 4 in 1 drivers directly from VIA which uninstalled the previous drivers. In Device Manager, under IDE ATA/ATAPI controllers I have Primary IDE Channel (driver provided by Microsoft) Secondary IDE...
  26. G

    Epox 8K7A drivers CD - worth installing?

    hello, Is it worth installing the drivers that come with the 8K7A ? I'm talking about the AMD Miniport driver, VIA Bus Master PCI IDE Driver, and the HPT370 driver? I installed both WinMe and Win2k and I have no question marks in device manager. Would installing these drivers have an effect on...
  27. G

    T-bird / HSF / thermal compound installation questions

    AmazonRasta - What do you consider an adequate, mainstream HSF for it that's available in Canada? :)
  28. G

    T-bird / HSF / thermal compound installation questions

    Thanks guys, it didn't occur to me that the feet would compress under the springload once the the HSF is installed. Is it crucial to remove the current yellow thermagon "interface material" on the heat sink base with isopropyl or nail polish remover (both of which would require a trip...
  29. G

    T-bird / HSF / thermal compound installation questions

    Hi, I just received a T-bird 1.33 processor, a Volcano II hsf and the Arctic Silver II thermal compound. I'm a little unclear on what I'm supposed to do, after reading the instructions on arcticsilver.com. They say only this compound should be between the CPU core and the heat sink.. However the...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |