MPC-HC
Last night I tried to upgrade to the latest ATI driver (10.x). It only gets worse -- if the HDTV is turned off and later turned back on, the display gets corrupted.
I used to have nVidia 6600 and Asus HD 4350 with the same setting and it works fine.
The driver is the latest from Gigabyte (dated 2010). ATI has more recent driver but my experience with non manufacturer driver has more issues.
XP SP3
ATI_8.70_RC2_WinXP_Jan15
1280x1024 primary display, 1920x1080p second display, extended desktop
In full-screen theatre mode, 4:3 is stretched to 16:9 on HDTV
In full-screen theatre mode, 16:9 is compressed vertically, with black bars on the top and the bottom of the screen...
Epox 9PNA+Ultra mobo
AMD A640 3800
2x1GB Crucial RAM
nVidia 7600 card
Seagate SATA drive
Antec Sonata II case with Antec PS
Machine was working last night. It fails to boot this morning, stuck at post code FF (attempt to boot, the first code). I've already tried to reset CMOS but it...
I am trying to move the OS from a PATA drive to a SATA drive. Does this mobo has a bios option to set the SATA channel to be compatible to IDE so that the SATA drive can be detected by drive copying software as an IDE drive? Or is there any drive copying software that recognize SATA natively...
This is my first epox mobo. The chipset fan is really loud, even louder than the fan on the X800 video card. And the noise is even a bit irregular. Is it normal for the ultra board? Or do I have a defective hsf?
Thanks!
I have an Antec case with 120mm fan. My video card fan is also loud - Radeon X800, along with the chipset fan. I stopped video card fan and what remains is the chipset fan. CPU and case fan is quiet.
To answer my own question, you have to use DIMM solt 1&2 first. I used 3&4 and got C1 with the fan plugged in. Still, that is weird, with and without fan.
Just put together EP-9NPA+Ultra, 3700+ and 1GB dual channel Corsair in an Antec case.
Have a weird problem: If I plug in the system fan, the cold boot would fail. It will continue to beep at about once every 1 or 2 second with code C1. However, if I power down and then power immediately...
Help on firmware!
Just bought one and showed up as Verbatim 401248AL. Tried to use the Lite-On flash but it does not refuse to upgrade the firmware.
How could I flash it to Lite-On? What is the benefit to flash it to Lite-On?
Thanks!
Does anyone know:
1. What the expansion card limit (32, 64, 96)?
2. if the Smart Medica card, once used on dmp-110, can be reused/reformated for other devices?
3. Anyway to upgrade/hack the firmware to support WMA format?
I would recommend to use Mozilla as browser. It gives you control over popup. The key feature here is it can disable JavaScript open window function on page load. This means no popup will ever show up when you visit the page. It also allows you to get rid of so-called "pop-under". Since I...
<< Once again, on the $30 coupon, despite information to the contrary, you can use it to purchase a $30 GC and just spend that whenever. I'm sitting in front of mine right now. >>
It does not work for me. Buying a $30 GC and got the following on submission:
One or more errors were...
If you want to hang on (with very little hope), try talk to CSR to make sure they don't ship the other stuff in the order. I told them to ship everything together. Still, they shipped the other stuff separately. I found out when talking to CSR and got it stopped. You may have to call them...
Watch you CC. I talked to two OM CSR and argued with them that they should honor the $25 coupon and failed. They told me that once the system scan thru those "back ordered" drives and cancel them from the roder, they will aslo make adjustment to the charge and take off that $25 coupon if the...
Just got an email from OM and they are canceling my order - "It is discontinued so that we have to take them out of your oder". I ordered some other stuff and now they don't honor the $25 coupon either.
:((
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.