Search results

K
AGP Speed Info

Is there a program out there to tell me how fast my agp bus is running. I know the default agp bus speed is 66MHZ but I am overclocking and I want to know what the agp speed is?
- killumanati
- Thread
- Jul 1, 2003
- Replies: 3
- Forum: Graphics Cards
K
WAP Question

I have a Linksys WirelessG WAP (802.11G 54mbits). There are 2 settings; RTS threshold & Fragmentation Threshold, these settings are on the WAP and on the NIC. What are the optimal settings for these. The values I can input for these 2 settings range from 256-2346. Thanks for any help...
- killumanati
- Thread
- Apr 1, 2003
- Replies: 2
- Forum: Networking
K
Drag on DSL - Tech Help Needed.

About a year ago I had the same issue with my dsl in my apartment. I beleive I had a two fold problem: 1 Being I had major static in my line due to bad inside wiring 2 There was some bad hardware in a junction box about a quarter mile from my house. How my problem was resolved First I had...
- killumanati
- Post #7
- Mar 27, 2003
- Forum: Networking
K
I lost my wireless AP address...

I did this once also and I used a program called angry ip scanner. It will scan your entire subnet for all known active nodes. It should find the AP quick fast and in a hurry.
- killumanati
- Post #5
- Mar 26, 2003
- Forum: Networking
K
WD2000JB Hard Drive Problems :(

Sounds to me like the problem actually may be with the drive itself. Usually HD manufactures will have some low level utilities that will enable you to check the HD and even do sector by sector checks I would do this first before spending more money on components. I thing to caution you on some...
- killumanati
- Post #2
- Mar 26, 2003
- Forum: Computer Building
K
Has anyone broken a mobo?

I have had these same issues in the past where I am putting in IDE cables and what not and the board will flex and bend but it has ALWAYS worked fine. I even one day tried to break an old Mobo and could not do it with my own strength.
- killumanati
- Post #2
- Mar 26, 2003
- Forum: Computer Building
K
Restart Problems

I currently have a Asus A7M266 MB with a 1.4G Athlon installed. I have this weird problem where the computer will not restart properly if you tell it to just restart out of windows XP(or any OS for that matter). It will however do a shutdown fine, but if I wanted to do just a restart the screen...
- killumanati
- Thread
- Mar 26, 2003
- Replies: 3
- Forum: Computer Building
K
S-Video to TV Question

What I did to fix the issue was to run the coax coming from the wall into a surge protector then run a coax from the surge into the TV. The surge must have some kind of signal filtering built into it. Once I did that the PC shows with no lines and I can watch cable without having to swap out...
- killumanati
- Post #12
- Mar 26, 2003
- Forum: Computer Building
K
S-Video to TV Question

Evil1 do the same thing and I am sure you will be happy too...
- killumanati
- Post #8
- Mar 25, 2003
- Forum: Computer Building
K
S-Video to TV Question

Guitar you are a friggin genious..It was just like you said. That line was so damn annoying especially when you are trying to watch movies coming fom your PC on your TV. I am sure there has to be lots of folks out there who have that same problem but don't know how to fix it. Thanks again dude...
- killumanati
- Post #7
- Mar 25, 2003
- Forum: Computer Building
K
S-Video to TV Question

To anyone who can help, I recently purchased a 9500 pro with S-video tv-out. I connected this to my TV using high quality cables from Monster Cable. The picture does show but there is this constantly rolling line, that scrolls up the screen when the pc is connected to the TV. I have eliminated...
- killumanati
- Thread
- Mar 25, 2003
- Replies: 14
- Forum: Computer Building
K
S-Video to TV Question

To anyone who can help, I recently purchased a 9500 pro with S-video tv-out. I connected this to my TV using high quality cables from Monster Cable. The picture does show but there is this constantly rolling line, that scrolls up the screen when the pc is connected to the TV. I have eliminated...
- killumanati
- Thread
- Mar 25, 2003
- Replies: 1
- Forum: TVs
K
Power Supply Question

Currently My system is as configured Dual Athlon 1700 Geforce2 Video 4 Seagate Cheetah 10,000 RPM Drives in Raid5 Hardware SCSI Raid Controller Adaptec 219160 SCSI Card DDS-3 Tape Drive Floppy Cdrom 500 Watt ATX Power Supply My Question is this If I added 4 IDE 100 gig + drives to this system...
- killumanati
- Thread
- Mar 19, 2003
- Replies: 3
- Forum: Computer Building
K
TV-Out Question

I noticed it was already set to 60hz and I also tried setting it to other refresh rates and resolutions. Could it be the quality of S-video cable??
- killumanati
- Post #3
- Mar 13, 2003
- Forum: Computer Building
K
TV-Out Question

I have PC with a ATI 9000 Pro connected to my 27" Sharp TV via S-Video Cable. The question I have is this. When connected there is this wavy line that constantly scrolls up my tv at a very slow pace. It kind of looks like the lines you will see if you are watching a TV show and they have a...
- killumanati
- Thread
- Mar 13, 2003
- Replies: 3
- Forum: Computer Building
K
TV-OUT Question

I have PC with a ATI 9000 Pro connected to my 27" Sharp TV via S-Video Cable. The question I have is this. When connected there is this wavy line that constantly scrolls up my tv at a very slow pace. It kind of looks like the lines you will see if you are watching a TV show and they have a...
- killumanati
- Thread
- Mar 13, 2003
- Replies: 2
- Forum: TVs
K
Gefroce4 Question?

I currently own a geforce4 ti4600 for my main gaming PC. Using the latest and greatest detonator drivers there is an option while using the tv-out mode to set the output up in a cinema quality. The button you push to do this resembles a movie reel. When used it widens the screen so when playing...
- killumanati
- Thread
- Feb 18, 2003
- Replies: 0
- Forum: Graphics Cards
K
Geforce4 Question

I currently own a geforce4 ti4600 for my main gaming PC. Using the latest and greatest detonator drivers there is an option while using the tv-out mode to set the output up in a cinema quality. The button you push to do this resembles a movie reel. When used it widens the screen so when playing...
- killumanati
- Thread
- Feb 18, 2003
- Replies: 1
- Forum: Computer Building
K
Dual Athlon MB Question

How do you know if they are MP locked???
- killumanati
- Post #3
- Sep 13, 2002
- Forum: Computer Building
K
Dual Athlon MB Question

I am looking at getting a MSI K7D Master Dual Athlon MB. MY question is this. Will this board run in dual mode with regular Athlon XP's and Durons???
- killumanati
- Thread
- Sep 13, 2002
- Replies: 6
- Forum: Computer Building
K
Power Supply Question

My system consisted of the following Epox AMD761 Motherboard 1.4 Tbird 512 PC2100 2 Maxtor 40GB drivers running raid 0 DVD drive CDRW Drive Sound Blaster Live Value 3com NIC TV Tuner 1 Light strip 2 8mm case fans 1 floppy drive ***300 Watt power supply*** Recently my system started acting...
- killumanati
- Thread
- Aug 28, 2002
- Replies: 2
- Forum: Computer Building
K
Power Supply Question

My system consisted of the following Epox AMD761 Motherboard 1.4 Tbird 512 PC2100 2 Maxtor 40GB drivers running raid 0 DVD drive CDRW Drive Sound Blaster Live Value 3com NIC TV Tuner 1 Light strip 2 8mm case fans 1 floppy drive ***300 Watt power supply*** Recently my system started acting...
- killumanati
- Thread
- Aug 28, 2002
- Replies: 1
- Forum: Computer Building
K
Motherboard Raid Controller Question??

I had a Epox motherboard with a highpoint raid controller and raid 0 set up...This motherboard recently self destructed and I bought a MSI ultra2 with a promise raid controller..Will the promise controller recognize the raid 0 set created by the highpoint controller...I have valuable data on it...
- killumanati
- Thread
- Aug 23, 2002
- Replies: 1
- Forum: Computer Building
K
Motherboard Risers HELP!!!!

Most cases come with the brass motherboard risers that you use to connect the motherboard to the case. Sometimes they also come with little plastic washers that it seems like are supposes to be used between the riser and motherboard and the motherboard and screw. Does anyone know what these...
- killumanati
- Thread
- Aug 22, 2002
- Replies: 2
- Forum: Computer Building
K
Motherboard/Power Supply Issues

Scenario: In the past 8 months I have had two different motherboards, power supply's, cases, and video cards. The only thing common to both computers is a network card, sound card, and tv tuner(cable not plugged in). Both computers have died the exact same fate. What happens is this; after...
- killumanati
- Thread
- Aug 22, 2002
- Replies: 0
- Forum: Computer Building
K
HURRAAAYY ATI!!!!

Kudos to Ati for aactually delivering a solid and extremly fast product. It's about time that we as consumers have more choices when it comes to high end cards..Now that we have 2 fast cards at the top of the scale, prices can drop since we now have more competition. Personally I have been with...
- killumanati
- Thread
- Jul 18, 2002
- Replies: 0
- Forum: Computer Building
K
.VxD errors.... HELP PLEASE!

In your bios you should have a fail safe setting. When you set it to 'fail safe' that is like the slowest bios settings you can take but they are the most compatible. After setting it to fail safe that should eliminate a wrong bios setting.
- killumanati
- Post #9
- Jul 17, 2002
- Forum: Computer Building
K
.VxD errors.... HELP PLEASE!

He has already done a re-install of the OS so that can't be the problem, the problem here lies in some peice of hardware corrupting data. Probably the CPU....
- killumanati
- Post #4
- Jul 16, 2002
- Forum: Computer Building
K
How to change workgroup inside of Win2K?

Right Click My computer, click on network identification tab,then change the workgroup, then reboot. Then waaallllllaaaa your done. :-)
- killumanati
- Post #2
- Jul 16, 2002
- Forum: Operating Systems
K
XP Drive Question

they are attached to the onboard IDE. (1st IDE Slot)
- killumanati
- Post #3
- Jul 16, 2002
- Forum: Operating Systems
K
Help! System Doesn't Post (but turns on)

What I would try is this I would remove the RAM from the system entirely and then boot the system with no RAM. If the thing does not start beeping at you then you know you are definitely not getting past the mobo/CPU take the CPU and put it into another PC and see if its works. If the CPU works...
- killumanati
- Post #5
- Jul 16, 2002
- Forum: Computer Building
K
.VxD errors.... HELP PLEASE!

I have had erroros like this in the past. The one that is of most interest is the Windows Protection Error, getting this on boot up ususally means you have some kind of serious harware error. The times I got this was when I was overclocking my CPU. When you overclock you stress the CPU im key...
- killumanati
- Post #2
- Jul 16, 2002
- Forum: Computer Building
K
XP Drive Question

I have XP installed with all the latest patches installed. My problem is as follows; I have a 2 optical drives, DVD drive and a Sony CDRW writer, the dvd drive is set to master and the cdrw is set as slave. XP will only see the cdrw when I get into device manager and click scan for hardware...
- killumanati
- Thread
- Jul 16, 2002
- Replies: 3
- Forum: Operating Systems
K
Nvidia Overclock Utility????

What is the best utility to overclock nvidia cards. The card I am trying to overclock is a G3 ti500.. Also post any success you may have had in overclocking your cards. --- If you ask this question one more time in this forum, off with your head. AnandTech Moderator
- killumanati
- Thread
- Jul 11, 2002
- Replies: 1
- Forum: Computer Building
K
Nvidia Overclock Utility???

What is the best utility to overclock nvidia cards. The card I am trying to overclock is a G3 ti500.. Also post any success you may have had in overclocking your cards.
- killumanati
- Thread
- Jul 11, 2002
- Replies: 2
- Forum: Graphics Cards
K
Nvidia Overclocking Utility??

What is the best utility to overclock nvidia cards. The card I am trying to overclock is a G3 ti500.. Also post any success you may have had in overclocking your cards.
- killumanati
- Thread
- Jul 11, 2002
- Replies: 0
- Forum: Computer Building
K
CompTIA Network+ Cert - Any of you have it?

I dont have my Network+ but I do have an A+. The A+ test was not that hard but just as with anything it depends on how much you have prepared for the test. As for the price 199 is steep but think about it this way, to become MCSE you have to take 7 tests at 125 a pop. So putting it into...
- killumanati
- Post #3
- Jun 24, 2002
- Forum: Networking
K
Heat Dissipation

Does anyone know how much heat the new thoroughbred processors are going to dissipate. I currently have a 1.4gig tbird and it gets hot as hell under a full load (62 Celsius). Trying to figure out if I got a 2000+ thoroughbred, how hot this chip would run.
- killumanati
- Thread
- Jun 24, 2002
- Replies: 5
- Forum: Computer Building
K
WMV Player

does anyone know of a media player that plays WMV files but also lets you download the files to your HD for future viewing purposes???
- killumanati
- Thread
- Jun 15, 2002
- Replies: 0
- Forum: Computer Building
K
ASX File Question

I was wondering is there a way to capture an ASX file while it is streaming into your computer. By default these play with windows media player. Is there another Movie player that will actually download the file. I am trying to do this so that I can have a movie for later viewing.
- killumanati
- Thread
- Jun 12, 2002
- Replies: 1
- Forum: Graphics Cards

RESOURCES

Top Bottom