Search results

  1. ASRock Conroe865PE

    I'm presently testing the 775i65G right now with an E6300 I had sitting around, using this as an upgrade to an older P4 system as a dedicated folding rig. So far it's overall a winner for a $50 board but it's no overclocking champion for sure. Presently my max stable overclock with it is in the...

  2. Intel states Core2 Duo to "SHIP" early August...

    I'm waiting for an e6600 myself.

  3. the *OFFICIAL* core 2 duo midnight release thread 2.0!!!

    Yeah, I just looked and they are listing the e6600 at $399.95. :( I imagine that there will be a lot of price scalping going on today too. I've also noticed that Newegg has been scalping on hard to find items too. A case in point is the P5W DH Dlx. Newegg wants $270 plus shipping, but they have...

  4. MWAVE CL56 Notebooks

    Yeah, that model Compal laptop is also sold by www.powernotebooks.com too; I bought 1 about 8 months ago. It's a pretty darn nice laptop and my 2.0 is darn fast and it also folds like a mofo with no problems overheating.:thumbsup: I don't know how mwave's support is like, but I haven't had to...

  5. Is it just me or is the P3 the best thing Intel has ever done?

    I also have to go with the Pentium M mobile processors. With the new Dothan release, it run's very close to the high end P4's and Hammers in the greatest majority of benchmarks and it uses less than half the power of either. I just wish they were making some desktop boards that would run these...

  6. AMD xp 2500+ mobile or regular 2500+

    Right, the ram is your limit with the NF7, but with the mobile 2500, you can adjust your multiplier so that you can stay within your ram's operating capabilities.

  7. Codegen 480 W PSU

    I've also never used this particular codegen psu but I've used a couple of their 300 watters and wasn't impressed. I have a 250 watt psu that would run rings around those 300 watters from them.

  8. Socket 939

    I just read today that they've been delayed to sometime in June.

  9. Green or Brown XP Mobiles

    I have 2-2400m's and 1 is green and the other brown. The brown 2400m overclocks slightly better than the green one. I also have a 2600m and it is a brownie.

  10. Did I just mess up on my Mobile Barton purchase?

    Balex, you shouldn't have any problem with your plan for the XP-M, just be careful when you do the wire in the socket trick and get the wires in the correct holes. Personally, I just cut an L3 bridge to enable the high sense multi on the 2400m I modded for my A7N8X-Dlx, which suffers from the...

  11. Abit NF7-S Recommendations

    The Thermalright SLK900a or U or the SLK947 are great cooling choices with the NF7-S. For the processor, just buy a mobile 2400, 2500 or 2600, even if he doesn't plan to do some radical overclocking. Just set the fsb speed in bios to 200 and the multi to 11 and set vcore to 1.65v and he will...

  12. which mobile to buy? 2400,2500,2600

    I own 2 mobile 2400's and 1 mobile 2600 and I find that my 2400's don't overclock as well as my 2600 does, all tested on the same NF7-S mobo. All are stellar performers but my experience is that the 2400 is more of a crapshoot for very high speed than the 2600 (and from what other people on the...

  13. Highests Multi allowed on an AXP Mobile?

    It all depends on the motherboard. A lot of mobos won't let you adjust a low range multi like the mobiles have over 12.5. I do know that the Abit NF7-S has no problems over the full range of multis; I tried it on mine to check it. I've also heard that some of the KT400 and KT600 chipset boards...

  14. 2600 Mobile, NF-7S and 200mhz (or lack of 200mhz fsb)

    I would say for you to download and run memtest86 while trying to run at 200 fsb with a low multiplier (so that you rule out processor problems) and see if memtest86 shows any memory problems after the first 4 or 5 tests. Memetest86 runs in dos mode at bootup and is a lot better check of memory...

  15. What to Expect From an Unlocked 2400+?

    I have an early 2400 that I've since modded into an MP2600. Before modding, it would do around 2300 at 1.85v vcore. The one you have is a much newer stepping than the one I have, so I'd say you have a decent chance of a higher overclock than that or you should be able to run around 2300 with a...

  16. Best proc with PC2100 ram?

    That's the fastest that will run on a 266 fsb without overclocking on either a dually or regular desktop board.

  17. Fastest Coppermine Celeron?

    I would say for you to get a Tualatin Celeron with an upgradeware slotket and then get a couple of heatsinks for the mosfets and glue them on with AS Adhesive. The old BH6 rev. 1.04 I used to have is still in use today with a P3 1000E server proc at 1120 and it's been running that proc for...

  18. HS/F Reccomendation, DFI NFII Ultra + AMD XP2500-m

    Any of the copper Thermalright products should be great, such as the SLK900 A or U, The SLK-947-U and if it fits and you have very deep pockets, the SP97 with an 80mm fan such as the Thermaltake SmartFan II, which has a potentiometer so that you can vary the speed and noise level of the fan...

  19. 2800+ vs. 2600+ M vs. 2400+ M

    You hit the nail right on the head, Dman877

  20. ABIT gurus to help upgrade th711 raid board

    Your board should support any 400 MHz (100 fsb speed) P4 with the latest bios. Abit's site lists it to 2.4 GHz, but I don't know if they make a higher clocked 100 fsb proc than that.

  21. XP mobile on board with no multiplier adj

    Glad to hear you got it up and overclocking.:D Yeah, your next upgrade probably needs to be a new case. Those old cases suck for airflow because the old processors they contained didn't put out near the amount of heat the new procs do. myocardia, you are dead wrong about the A7N8X-Dlx being...

  22. 2500 Mobile or 2600 Barton Really could use some Expertise Guys!!

    The 2500 mobile will more than meet your needs. I have 2 mobile 2400's and 1 mobile 2600 and all 3 can overlcock past 2200 MHz with no more than 1.65v vcore set in bios. My mobile 2600 will go to the mid 2400's with 1.65v set in bios. As for any problems with going past a 12.5 multiplier...

  23. Overclocking Mobile 2600 using CPUMSR

    You can either do the wire in the socket trick for a multi higher than 12.5 to activate the high side multis or you can do like me and cut 1 L3 bridge and get a multi higher than 12.5 so that I could run a mobile 2400 on my A7N8X, which suffers the same problem as your RDA.

  24. Has anyone tried unlocking their Athalon?

    Dude, that's a real old article on unlocking the old palomino core XP's and has nothing to do with unlocking a present day manufactured Tbred or Barton core XP. There have been numerous attempts made to unlock these newly locked XP's by people far more experienced than you or I with no success...

  25. Newegg's Barton +2500(locked or still unlocked?)

    If you are looking for unlocked Barton procs, then buy the mobile XP2400+ and mobile XP2500+ procs. They work great in a NF7-S 2.0 board and the multi is unlocked. I've bought 2 of them in the last month and both were unlocked and the both will run 2400 MHz or so with 1.85v vcore on air. They...

  26. Antec Sonata front 120mm fan recs

    Another alternative for a 120 X 25 mm fan is the Enermax adjustable. I have one and you can just dial in the amount of airflow (and noise;) ) you need for cooling. If you have enough room for it, the 120 X 38 mm Panaflo M1A is also a fairly quiet fan that moves a lot of air. It's actually a bit...

  27. Best CPU Heatsink for the Barton 2500+

    SK7 asnd Delta FFB0812HHE(the quiet focused flow delta).

  28. AXP 2100+ Tbred at GoogleGear, is this a guaranteed Tbred "B"?

    FYI post. I bought my A7N8X mobo from gameve.com in early December and had no problems at all with the purchase. I would buy from them again if the price was right. Of course, YMMV.;)

  29. HSF for Barton XP 2800+? difficult decision!

    I should be getting the fans in on Monday afternoon; I'll let you know about the noise then. Also, I have a couple of Panaflo L1A's and I've never tried them on a heatsink because they flow too little air and too low a static air pressure IMO to be an effective fan for a heatsink. They do work...

  30. A7N8X and SLK-900 HS

    You can either bend the cap on your mobo or take a dremel to the SLK900 and make clearance by grinding away the offending part.;)

  31. HSF for Barton XP 2800+? difficult decision!

    Or you are like me and are cost-conscious. I just ordered the Panaflo 80mm H1A's for $2.95 per fan, sidewindercomputers has the Enermax for $9.00. The Enermax is a nice fan; I have a couple, but I can get 3 Panaflo H1A fans for the price of that Enermax.

  32. This is what happens when hardware reviewers smoke too much crack

    Also, if you check the link to elitecool, it does go to a Panaflo H1A fan, with the correct specs. If you look at the enlarged view of the fan he says he tested, it is a U series fan, not an H series.:disgust: If you look around elitecool's site, they also sell the U1A 80mm Panaflo fans too...

  33. looking into watercooling

    dinde, Dangerden makes some excellent quality waterblocks; I'm using 2 maze1c waterblocks on one of my dual AMD rigs. The suggestion that Soldat made about checking out watercooling at overclockers.com is a good one; they have many experienced watercooling people at those forums. Also, to do...

  34. HSF for Barton XP 2800+? difficult decision!

    GroundedSailor, I have 4 of the Panaflo 80mm H1A fans coming from mpja.com and if they come in before I go to work I'll let you know how loud they are. They are rated at 39 cfm with 32 dB sound and .25 amp current draw and they are selling them for $2.95 each. I just ordered from them over the...

  35. HSF for Barton XP 2800+? difficult decision!

    I can also vouch for the SLK800; I own 3 of them, besides owning an MCX462+, original MC462 and an 8045. The performance of the SLK800 is at least as good as any of the others. Another option if you decide to go with a mobo that has the 4 holes around the socket like the 8RDA+ is the new SLK900...

  36. In Need of a Good HS/F for AthlonXP Processor

    I'm running the setup you are talking about; an A7N8X with an XP2400 in it. I'm using the SLK800 with the Delta FFB0812HHE fan, which is the quietest focused flow fan that Delta makes in 80mm size. I run Folding@Home on this computer 24/7, so this rig stays 100% loaded all the time. My temps are...

  37. Which Budget Heat Sink Would you Choose? Compiling A Definitive List (!)

    Of your choices you posted, I would definitely go with the SK7. I have 3-Tbred XP1700 "A" procs and an XP2400 and I can tell you that cooling the "A" Tbred is definitely harder than the "B" Tbreds. The full load temps on my XP2400@2250 and 1.85v vcore on my A7N8X are just a hair lower than the...

  38. SLK-800 vs Alpha PAL8045

    I happen to own both and while I tend to like the mounting method of the Alpha better, using the 4 holes around the socket, the clip for the SLK800 is by no means fragile. The clip on the SLK800 is pretty well constructed for a socket clip retention mechanism and I'm not afraid at all of it...

  39. MCX-462U or SLK-800?

    I have the original MC462, a new MCX462+ and an SLK800 and they all are great heatsinks. Actually, I think that the SLK800 is at least as good as the Swiftech's and I'd go with whatever is cheaper at the time you buy. The fit and finish on the SLK800 is every bit as good as my Swiftech bases, in...

  40. I have Zalman CNPS6000 and it's 60 (C) Degrees~~ Help!!

    You can't go wrong with the SLK800. I'm using the Delta FFB0812HHE focused flow fan though, which is the quietest of the focused flow Delta fans. It puts out 45 cfm air for only 39dB and it is keeping my XP2400+@2250 real cool on the A7N8x mobo. Right now, it is only showing 26 C for the cpu...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |