To dahbusdriver:
are those instructions for a unlocked chip or a locked one? I ask because my duron is a 750MHz locked and I am wondering if they could work for me.
I agree totally with afropick. take his very good advice and get another 20g 7200 rpm and use that for the raid and use the 40g to put all your apps, another OS.
To Travis:
I am running 98se but the problem came up with the 256 of Kingmax installed. That is why I went back to the 512 micron and the same problems. Used the microns on the CUSL2 for about three weeks and not once did that problem come up.better board?
For zippy:
If ACPI can give you "Soft Off" what is wrong with "Soft On"? Not every one need a "Hard On" esp if the box is under your desk.
If the BIOS is more like Abit's then they should really do something and make it more like ASUS and most others with a...
After spending a week with the Iwill KK266-R I have come to the conclusion that it may be stable but not really impressive. Here are a few gripes I have with the board:
Iwill could have done much better with the BIOS. Also there is no feature to turn on the puter with keyboard/mouse.
I have...
To Budman:
I know it looks like a DOWNGRADE but I took the steps for 2 reasons:
1 I wanted to mess around with a socket A board. OCing with Intel Celerons and P3s had gotten a little stale for me.
2 I choose a duron 750 beacuse in the OC guide from Anand it showed that the 750 duron or Athlon...
To Budman:
I know it looks like a DOWNGRADE but I took the steps for 2 reasons:
1 I wanted to mess around with a socket A board. OCing with Intel Celerons and P3s had gotten a little stale for me.
2 I choose a duron 750 beacuse in the OC guide from Anand it showed that the 750 duron or Athlon...
To Abdul:
Do you know anything about overclocking? A board does not get to claim stability status if all it can do is be stable at stock speeds or FSBs. I would suggest that you perhaps read a few reviews about mainboards and stability. Also yes this board supports mulitplier and voltage...
As per Anand's Athlon/Duron OC guide L7 on the processor is used to change the voltage. Is my understanding right in that you only need to use L7 if your motherboard does not support voltage adjustment? My reason for asking is that my DURON 750 is locked at 1.6v and in the diagram in the review...
After reading with great eagerness most of the reviews concerning the Iwill's KK266-R I purchased one. Along with it I got a Duron 750 and 256Mb of KingMax PC-150 memory(2x128 sticks). It was my hope that even with out having the ability to unlock my CPU I would just try for a FSB boost...
use onboard. However there are reports that a problem might exist using intel ata drivers with the IBM drive. I think there is a patch available somewhre. Check ibm site.
I have a linksys router which was usually working with my Westell modem to provice my DSL service. Recently I noticed that I could not access the service with my current config. I called Verizon because when I connected the modem without the router I get a message about password. Verizon changed...
Doubt if you will find it for free unless it is on some cracked site. The last time I saw the game Jazz JackRabbit2 was selling for $4.99. I should think you can splurge for that.
Just a note of warning here concerning Promise FastTrak 100 and Promise Ultra 100 in the same system. They will not work together.
Just received a reply to this e-mail to promise:
I have written to you before notifying you of the problem I am experiencing with the Promise Ultra 100 and the...
Would like to thank all you ppl for the wonderful you supplied regarding my request. Especially Herr Yunta. i call the number you gave and got a live person right away. told them the problem and an RMA was issued immediately. thankfully my board is on its way to getting a new BIOS flash.
In the...
I wish I could have said the same in my case concerning the promise ATA 100. I just purchased one to replace my old faithful ATA 66. The irony of the whole thing is that it will not work with my Promise FastTrak 100. The FastTrak and the ATA66 worked very well together. However the ATA100 will...
Can anyone help me to contact ASUS? I have a dead CUSL2 due to a bad BIOS flash. I really need to contact ASUS to get an RMA to get my board fixed. Can anyone help with a number or something? I have written many many emails but no response to date.
Andy my CUSL2 is dead due to a bad BIOS flash. I am unable to contact ASUS. How could I revert to that backup? Any word on that? I am now looking to get another board that has BOOT-block protection. Any suggestions?
My CUSL2 is dead due to an incomplete BIOS flash thur windows. I am unable to contact ASUS to see if I can get the board repaired. I am threfore looking into a new board to play with (4 months with one board too long).
Any one has anything good or bad to say about the Soyo board? I already know...
I'd like to take advantage of the RW section of my burner. I am thinking of using some sort of Packet writing software to get the job done,reason being that some of them offers compression. Can You Gurus out there help me select a good Packet writing software? Two of my main concerns are...
I hear all this talk about 2nd usb port responsible for soundcard problems on the CUSL2 mobo and would like to add my 2 cents.
I cannot confirm the afore statements made. What I can say however that that is not at all true in my case. I have all my usb ports enabled and I am using a SB Live...
This weekend I am looking to buy a P3 700e. I need some input as to which to buy, OEM or RETAIL, Philly or Malay?
Give some feedback please.
For the past 2 months I have been running a P3 500e OC'ed to 750(150X5).:P With my rock solid Micron memory (7.5ns type) on a CUSL2 I am hoping to hit...
Can u say which jack is the "MULTI" port? I compared both cards on soundblaster.com and all the jacks are the same as far as spec go. I had a live full (before the platinum) and that one came with a daughter card that had what I could call a "multi" port. Could you supply a...
Anyone running one of these cards? If so, would you be willing to share your software with me for a test? I am currently using an X-GAMER. I went to www.soundblaster.com and found that there is no difference in the two cards except that the new 5.1 version does Dolby Digital decoding. It seem to...
I am thinking of signing up for Verizon DSL service (available in my area) and am currently running a small network and would like to share the service. What are the things I should know about using a router? Do I have to buy a spefic router that is compatible with their system or just any will...
Try NEATO. The software is free on their website: www.neato.com and the labels are available from them and almost everywhere. the label applicator is also available from them I think. You can't go wrong with NEATO. I think you can just buy a kit from places like staples or comp usa. first check...
I have tried those things and they do not work. Please note that the DOS box is not a window. I am fully in the DOS prompt but it is only using half of my screen the rest of it is black. The programs carry a blue background and that only shows up in the upper level of the screen and all my fonts...
I just upgraded from win98se to win2K on a machine at work. Everything seem to be going fine except for when I have to run a program in DOS. At work in the dept where I am we have a small HP server running Novell 5. The accounting program that we use AXCENT, is on the server but runs in DOS...
To: Mieinfwa:
I am very sorry that your recent experience with IBMs have led you to come to such an awful conclusion. I do however beg to differ strongly with you on that note. I am currently running 5 IBM drives including a 68 pin SCSI 6.4g in my system. Some of these drives dates...
Thanks for the replies guys. Photo is not a big deal here, for that I have an EPSON stylus color 850 and for laser I have an EPSON ActionLaser 1500 they both get the job(s) done. I was just wondering it this printer could be attached to one of my workstations as a local printer that the kids...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.