Marcoco, I just checked the $100 rebate form given to me by the store (a photocopy), and it says "December 23, 2001." The address is P.O. Box 9712-44728, McAllen, Texas (Parago).
As for the $65 rebate from Envision, it goes to EPI Rebates in Phoenix, Arizona (seems to be Continental...
I submit all the materials glued together lightly with Uhu stick glue because some rebate processors have sent me letters saying that I had left out a certain required item.
Bacillus is right that one of the chipsets I tried was the 440BX. The other boards were the FIC VA-503+ and an an Intel based board with integrated video.
There were two stickers on the chips, one an elliptical picture of Earth (same as for the Fry's 256MB DIMM with Seitec chips) but nothing...
I recently bought a 512MB DIMM from Fry's where the only markings on the chips was "64Kx4 8". Do chip manufactures ever sell chips without their logo on them, or is it more likely that the original markings were removed by the DIMM maker? This DIMM was reported as being only 128MB, but...
I'm having problems getting any serial mouse to work with DOS (Win98 and 6.22) or Win98. The closest I've come to success has been to install them with a Genius mouse driver, but it always installs them in 3 button mode even when their switch is set to Microsoft/2 button mode. The serial ports...
I'm running Windows 98 orig. ed.
I transplanted a hard drive that had been running on motherboards with Intel chipsets to one running the VIA MVP3 chipset, and I think a compatibility problem with some of the drivers is causing problems with Windows Media Player 7.1 and maybe also with the...
Is there any way to download Microsoft's upgrades the old fashioned way, as one big file that can be stored on disk and installed later rather than through Windows Update or similar utility that requires a download for each computer? I find a few such files at their corporate download center...
My Celeron motherboard didn't provide enough room for the HSF clip to clear on one side, so I reversed it because it seemed symetrical to me. But only a minute or so after I turned on the power, the temperature alarm sounded, which wasn't good because its default setting was 65 deg. C. I took...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.