Trying to help a buddy install a linksys adapter for his laptop but during driver installation there is a missing win ME file "pc100nd5.sys"
any help would be great send it to
andy.jordan@us.army.mil
I have a similar problem with my EPOX 8kha+ and KDS VisSen monitor. I don't think it is a problem with the monitor. When I plug in the monitor cable to the video card port it must be almost all the way out in-order to get a signal. Weird!!! I figured this out by just wiggling it in the...
i was given the goahead to upgrade the office computers about 8 of them. Everyone wants new ones need some suggestions.
Dell?
Gateway?
Compaq?
Smaller company?
We are looking to spend 800-1000 each hopefully less
Well the network is on an army post in kansas. I will make the assumption that it is not a weird type, most likely the RJ-45 (?).
What kind of price range should I be paying.
and the Dongle thing, what is it? Do newer cards not have them?
Need a PCMCIA LAN card for my HP pavilion n3150(older) laptop.
Anyone with suggestions? cheap is better.
and what is the deal with the "dongle" do you need one or not. I noticed the DLINK DMF-560 TXD does not require one?
are all the cards pretty standard (ie. work on most networks?)
and...
What do you want your final destination for the files to be a newer desktop or a laptop. if a newer desktop just take out the Hard drive from the old and hook it up to the newer computers IDE cable as a slave of the main hard drive. may take getting on the old HD manufacturers web site to find...
not sure if a hot deal or not but I just got one for my wife and I :
Cellular One
$50 dollar activation fee
Free (yea right) Ericssion 1228
$10 dollars a month
8 Cents a min.
I thought it was a pretty good deal for my wife and I because we don't talk on the phone that much but...
Has anyone else tried to call them yet? I figure it must be a scam. If I tried to order one how would the credit card company handle it if it is? Am I liable?
I don't know much but it sounds like a software prob OS or driver. Try turning off all running programs except systray and explor (anti-virus software off!) and reboot, then try games.
just a thought
Well thanks everyone for help. It seems that my drive likes to be set to single (no jumper). I used the WD UDMA utility on their site and it seems to have fixed my problem. It still runs a few points slower on Sandra than the standard that was used, but much better than befor. Thanks again
I had same prob awhile back. I ended up doing a complete format of HD, It sucked! But I think now that maby one of my problems was a bad stick of RAM. I've got two Corsair ddr2400's and it turned out that one was bad, and giving me corruption messages. Just a suggestion try it.
TBird 1.4
Epox 8KHA+
256 Corsair 2400
Liton 16x10x40
WD 40gig 7200rpm
WIN XP Home
Can't think of anything else
I forced ATA 100 in the bios, checked UDMA in device manager, tried Auto in the BIOS, NO DICE!!!!
Any Threads you have to other discussions would be Great
Thanks
I have an epox 8kha+, WD 40 GIG HD 7200, win xp home
My HD is running (closing / opening programs ) very slowly. I think I remember reading on a anandtech forum about other people with this prob. My sandra 2002 scores rate my HD at under the speed of a 5400 rpm.
Does this have anything to...
Well I have scaned all the other format forums here and nothing has fixed my problems tried fdisk , format /mbr, sys c:, can't seem to get ext to retrieve a file from my xp cd.
The problem still seems to be a missing setupdd.sys file any one ever hear of it? and this error code 7 makes no...
well just had massive file corruption not sure if it was a virus or not but got progressivly worse after each boot. need some help with trying to format my hard drive (erase completely!) and start over. I have tried several times to reinstall using the win xp cd and a win 98 boot disk but no...
question on the difference between the pny driver ver 2188 and the latest nvida detonator driver? are they the same thing? do I need both and which order should I install?
thanks
I had the same error (WIN XP EPOX 8kha+) It seems the via 4 in 1 drivers I was loading were causing the problem. I got a suggestion from INSANE 3D he said not load the dirvers just use the XP default drivers. (KNOCK ON WOOD) Seemed to have fixed my problem!
just built my first system it has a PNY GF3 TI500 card and a new 19" KDS VS190P monitor. Both I am very happy with, one annoying issue is that the cable for the monitor will not work if it is plugged in all the way to the graphics card. It has to be 75% pulled out inorder to get a picture once...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.