NetBEUI is NOT a routeable protocol
if the two computers are crossing the router to talk to each other you need to use tcp/ip
you can however use NetBEUI over tcp/ip
i have no clue about those types of routers... do they use ACLs [access controll lists]?
they could have some sort of ACLs so...
Spike try removing one of those 256 sticks....
read closely in your mobo manual about ram that work with the 845D
you can only use TWO double sided stick and one single sided
256 would be double sided
Gamepc.com has a good article that sums it up nice
link
In fact your manual clearly says...
total WU:42
total time:1321 hr 26 min
average time:31 hr 27 min 45.7 sec
start date:Tue May 9 00:42:11 2000
lol beat those times!! whoop whoop!!
after almost 2 years of crunching I broke the 40 mark & by the end of the year I aim to reach 50!
na i started using the CLI over the GUI it...
Thanks RaySun2Be
It seems to be working just fine. I was missing that file, I prolly hit the new client button at some point.
Is it safe to delete the old client file located in work unit folder 1?
It is labeled as "oldsetiathomeclient"
with my cache size set to 10 why does it not finish all...
yup your instructions are just what i did before... but i went ahead and redid it
incase of user error
my pc shutdown problems are fixed
still having seti popup window at startup
in my seti folder i have 1-10 folders each one being a work unit since i selected 10 cache size
in my folder is...
1. my machine does not shutdown properly after installing the CLI client version.
I did the steps to find "Conagent.exe" but was unable to find it on my Windows 2000 Pro machine here.
2. every times Seti starts up it keeps asking me what exe file to work with? I am guessing it is really...
for one thing you will have improved bandwidth with the Router since each port would get 100% to each pc... but routers do create latency since they need to make choices and some what think...
as a hub is "sharing" the bandwidth with every pc since it just repeats the signal to every port on...
Sure
You need to make sure you buy fire resistant cat 5 cabling it starts with a P or G... I cant remember when i know this!!!
It is building code in most areas to use this type of cabling inside walls. Normal Cat 5 cables release toxic gas when burned.
Home Depot or Lowes should carry every...
I have a Sony Monitor like that too
same problem and i cant get rid of it with different options built in
when I was in high school I worked for Best Buy as Tech Support: it was a common complaint of the Sony monitors and KDS series
KDS and Sony use the same inards
let me start off by saying I have had no problems with booting at all untill I changed out my heatsink with a new powerful unit.
my problem is I get no video on the monitor
the lights on the board lights up like it is working... no beeps
devices light up and i can open and close my cd roms...
That is bull!
a board should work out of the box with 99% of devices
the Sb live problem was a huge miss, it isnt some rare card or device!
further more can you imagine having 400 via machines at a company.....
changing all those bios and updating with the 4in1 drivers
or a company like Dell...
My new Thermaltake Volcano Cu+
39dba is to loud!
i am about to go nuts and start breaking stuff
gonna have to stick with this one untill i can order a different one
I posted this in a word of warning to others...
39dba is alot louder then you would think, i couldnt imagine more!
i have read...
no vsync
no fsaa
that score might be high... all depends on how high of a rez you selected
and a BUMP since i want to know more clock rates for the T200s
At my college for the 3d apps and sound editing....they use Dell P4 1.6ghz QuadroDCC workstations
they run pretty nice
they also have a few of those G4 Mac cubes those are not to shaby either
Do a search for WickedGL by Wicked3d.com
you can purchase or download a trial version of it at Wicked3d.com but you should beable to find the full version for free out and about....
WickedGL greatly improves OpenGL performance on the Voodoo Glide cards
my FPS was maxed out in HL with my old...
the Ti 200's use a different PCBs then the Ti 500s
it gives the Ti 500 an advantage at higher memory speeds
i highly doubt many of these cards will reach the 600 mark
you would be pretty lucky so - GL
on another note
SUMA's Geforece 3 Ti 200 uses the same PCBs as the Ti 500s
and it has 3.8ns...
word of warning
many people run around saying just oc that Ti 200 to Ti500 speeds.
the ti 500 uses different PCBs which increase stability at high memory speeds
those that get the Ti 200 to Ti 500 speeds are very lucky and in the 10%
as far as differences between companies: very little...
i am waiting for the other mobo makers to release the I845D before I make up my mind.
i never look at the 1st board out the gates they tend to be the worst performer.
if it doesnt pan out so well I will just go for the Rambus solution or wait on the P4 memory bus.
i see the I845D as a great...
Neb:
your Crucial should reach Cas2 no problem.
honestly I do not think there is much difference between the Mushkin and Crucial.
One is rated higher and which means they put thier word on it will run at that!
in my experience both have been able to reach the same levels even tho the other is...
I also owned an I Will K266-R
Does not crash and the performance is not that bad. I wouldnt see a difference for what I do.
When I purchased this the AMD-761 was in at about 200 bones then. This only cost me 135 with raid!
As far reusing the PCB post, I wouldnt listen to him. The PCB says...
Gainward Cardexpert Geforce 3 Ti 200
4ns memory
Fire Engine Red PBC
Tv-out
only $170
ATi Radeon 8500
would be my second choice at
$188
the nvidia card with 4ns ram would oc much higher and my first pick
the ati for a non nvidia solution
either way you can not go wrong
i know some of you guys know this one.
or if ya got a link to an article that has a graphic with the number [ns] highlighted that would be better
my card has a bunch of numbers =[
CCN News
CCN writes: "European telecommunication ministers have agreed that unsolicited e-mail and wireless text messages should be prohibited under a new data protection law."
Even thought I am American it is about time some government realise that alot of it has gone to far.
I am tried of...
I had the same problem!
That flash ulitity creates the flash files in a folder!
but the files must be located on the floppy disks root and not in a folder!
so check that
I have a KDS but the older version of that it has the same tub [that sony ripp off] still tho
.25 dot etc
it is still working great [about 3 yrs old] but the sides are curved a bit and they are curved in a way i can not adjust and has always been that way
it makes every thing curved close to the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.