I have an ASUS T3 T3-P5945GC barebone system and just installed an Intel E5200 CPU. Unfortunately, the cpu appears to be running at 1.2 ghz according to CPU ID and I have already updated to the latest BIOS dated 6/2008. I believe this CPU was released after this BIOS so it's possible that this...
I have an ASUS T3 T3-P5945GC barebone system and just installed an Intel E5200 CPU. Unfortunately, the cpu appears to be running at 1.2 ghz according to CPU ID and I have already updated to the latest BIOS dated 6/2008. I believe this CPU was released after this BIOS so it's possible that this...
how about those ethernet over powerline adapters? Is that as good as a wire connection or just as flaky as wireless? I couldn't get my zycel combo to work due to some technical issue but there are other manufactures.
Aside from running a lan cable to my living room what solutions or specific products should I use to stream compressed 1080p HD Movies (like x264) to my living room? I need a solution that can stream hd movies to my htpc and supply internet/network connectivity to my other devices in the living...
I have 330ci with the Performance Package (ZHP) and got hit in the back by a lady with a Aston Martin DB9 (think it's an aston martin). Anyways, my rear bumber is ripped and needs to be replaced. Insurance Company of the lady (Farmers) called me and claims they can replace my bumber with an...
I bought some shards on 10/6/2005 and want to sell it asap. If I sell it today on 10/6/2006 will it already be considered long term capital gain for tax purposes or will i have to sell on 10/7 or later?
What board revision does everybody have? Not sure if multiple versions are out yet, but mine is version 1.0 (indicated on the pcb) and I got it from directron. So I know that I have the very first version.
Seems like I'm experiencing more issues than most ppl:
boot/ turn on problems at 400...
anyone else experience this problem with their ds3?
When I overclock the fsb to lets say 400 mhz, and then reboot or just turn off the pc and then turn it on, the computer will attemp to boot (fans turn on, but no display) and then turn off again. It will either do this for an indefinte time...
Shawn - How did you get ur Santa Cruz to work under Vista? I am assuming you are using latest xp drivers with some modifications?
I am about to go back to XP because I can't get my onboard sound (DFI Nforce 4 Ultra D) or Santa Cruz to work.
i lost my vista key too. Well i saved it in a file but then deleted it thinking that I wouldn't need it again. Now I want to re-install vista rc1 on my new computer and need my key again.
Does anyone remember how the key was delivered? Via email? (i searched through my inbox but can't find...
The 42A are just there for system growth. The PSU and case are usually the components I keep the longest. 2-3 years down the road, 40A + may become the standard.
The Silverstone 500w element and enhance 5150gh are on the top of my list too. It just seems like u get less withthe silverstone...
btw, the psu will be powering a conroe e6600 system that I hope to oc to 3.6+ with a single x1800 xt 512M card. Still haven't decided on the rest of the system (mobo, ram, etc...)
I'm about to pull the trigger on the NeoHE 550 because
- it can now be had for less than $100
- has 42A across 12v rails
- is near silent
- PFC
- modular cable
- fan at the rear may work better in an antec p180 case as oppose to a unit with bottom fan
However, the NeoHE seems to...
i placed an order but then cancel it because of the high failure rate mentioned by uses on newegg. Unless the latest batch of Ultra 5.1 have their quality issues worked out, i would only order them with some kind of extended warranty plan.
Just got one of the new WD drives from newegg specs here (http://www.newegg.com/Product/Product.asp?Item=N82E16822136003)
However, i can't get it to be recognized within the BIOS of my DFi NF4 Lanparty UT D motherboard. I tried forcing it to 150 mode and tried connecting it to any of the 4...
Will this card take any multi-channel source and convert it into DTS or DDL and preserve the number of channels? Say I play a game with 4 channels (2 front and 2 rear). and connect this card via digtial input to my receiver with a 5.1 speaker setup. If things are done correctly then the 2...
one of my invoices they sent me also showed the full price on my 165, but an earlier confirmation and actual cost charged to my CC included the discount from the coupon.
With a DFI NF4 Ultra D and XP-90, my 165 only gets up to 2567 @ 1.45 volts. Seems like core 0 is the limiting factor because core 1 can run prime 95 at 2.7 ghz while core 0 will produce errors at 2600mhz. Is 2567 dual prime stable in the low end in terms of average oc potential of this chip...
I am looking for an easy way to prepare my Schedule D for Tax reporting purposes. There are a couple online progams available but they all seem to charge an arm an leg. I have a buyAndHold account that allows you to make unlimited monthly stock purchases. Add in divident reinvesting and you end...
I did sell stocks. About 20-30 sell transactions. the headache is matching the purchase lot to these transaction and then keeping track of that for later year reporting.
I noticed the sticky tax thread, and will post my question in there. Mods can close this thread.
I am looking for an easy way to prepare my Schedule D for Tax reporting purposes. There are a couple online progams available but they all seem to charge an arm an leg. I have a buyAndHold account that allows you to make unlimited monthly stock purchases. Add in divident reinvesting and you end...
anand's review of the DFI nforce4 board indicates that it has memtest built in the bios. I can't find the option to run it anywhere in my bios nor do i see any documentation about it in the manual. In any case gonna try downloading memtest and give that a try.
I have been building systems for myself and some friends for years now and cannot explain/fix the random boot problems I am currently experiencing with my new Nforce 4 rig.
The system once up and running is rock solid whether running at stock speed or overclocked to 2.5ghz. The problem is...
I think the cpu and gfx card use the 12v rail. The hard drive might also use the 12v rail. If that is the case what component uses the 3.3 and 5v rail?
there is one more left at the fountain valley store. I just got back and picked one up. THe last one is all the way to the right behind the BFG Watercooled Card.
Can't find a direct link, but if you go to http://www.xgbox.com/ and navigate to the psu section u can find it there. Looks hardcore but the voltage/amp specs are not listed anywhere.
Can't find the difference between the two standard. I'm thinking about getting this psu
http://www.newegg.com/app/viewProductDesc.asp?description=17-103-460&depa=0
but noticed that enermax now has a revision 2.01 out that conforms to the atx12v 2.01 standard. Wanne know what the difference...
I'm just trying to create a dvd that I can use in my car to watch short clips such as music videos. Don't care about menus or anything fancy. Just need to be able to skip back and forward to the next song. I tried to read through some guides but they all trying to do much more complicated...
I have a coperate notebook that was setup to log into a domain. I can also log into windows this way without having any network connection to the coperate network. I think my user was setup as an admin on that domain. In order to share files I went to the computer name tab in the system...
first of all the maximum pc review used a pre-production version of the ultrax psu that was sent to them for cosmetic evaluation only. read the link for more details: http://www.ultraproducts.com/forum/viewtopic.php?t=106
I also jumped on this deal and here is my impresion:
-very powerful...
Any ram recommendation that can be used to run at 250fsb 1:1 ratio with the DFI Lanparty UT 250gb? According to anand the ballistix will do the job but 2 sticks will run close to $300. Is there any other recomendation that's closer to $200 for a 1gb of ram. If that is not possible, I can drop...
i guess my question then is what is the max safe operating temperature for a prescott where you can expect 2-3 years of usage out of the proc before it dying?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.