My landlord provides free internet access via an unsecured wireless network. I have a laptop, desktop, NAS, mediaserver and several other networked devices. What I'd like to do is setup my own wired network using a router. I would then have my wireless AP running in client mode to connect the...
I've already checked the settings in the bios and they are at 8x. I'm using a nforce2 board and have the latest generic nvidia drivers for both the card and motherboard because the manufacturer's are a lot older. I've seen this question asked a lot on various forums so I know it's pretty common...
I noticed on the Nvidia AGP settings tab it shows my card and motherboard as capable of AGP 8x, but the OS as only being 2x. I'm just wondering if it's actually doing 8x or if the OS is preventing it for some reason.
Normally I don't worry about video performance since I don't game, but I'm...
Thanks for the replies. For me it's always worth the time to troubleshoot if there is any hope because I enjoy messing around with that sort of thing. I was just curious if the drive was actually going bad or not. I dropped it in another machine and it ran for a week without issue. If everyone...
I have a very old 10gig drive that I was using to store downloaded programs and other various files. A couple of months ago I started having an odd problem where the 10 gig and a 200 gig drive on the same ide channel would become inaccessible and disappear from My Computer.
I removed the...
I have to agree with some of the previous posts that part of what is wrong with our education system is that they rely too much on curves and scales to prevent people from failing. When I first went to college none of my teachers graded on a curve. I returned to school 7 years later to pursue an...
Thanks, I sent a PM yesterday and haven't heard anything yet. I was hoping maybe one of them would run across this thread. I wouldn't even worry about it except I have some hardware I'd like to sell and it is required that I display my email address. :(
I have a new email address and when I try to update my profile I get a message that says my user name is invalid because it has a special character.
I can login and post just fine, but am unable to edit the profile due to the _ in my username. I haven't been active in the forum in quite some...
Yate Loon's are far quieter than a Vantec Stealth or any other fan I've heard. Unless you have the two fans side by side for a comparision it can be difficult to judge just how loud or quiet they are.
I have (3) 80mm Panaflo @ 5v and an 80mm Yate Loon @ 7v in my HTPC and I literally have to...
Hehe oops, not used to these forums anymore. Darn empty post. :o
I figured I'd try to get back into things, gotta find time to read up on the different projects. Had heard seti was ending soon and starting over or something like that. Kinda thought if it was I'd get back in at the start of the...
Good to cya Assim, yeah I'm sure it probably is. :o
Haven't had time to fool with DC stuff in awhile, I had just left it running then when I reinstalled windows on my setiQ machine I never got around to reinstalling it. :/
Wow it's been awhile TF!!!!! :Q
Sorry to hear about RL, hope things get back on track for ya real soon. :)
You should drop by IRC for a chat with us sometime if you get a chance, you know where we are. ;)
I know there are plenty of irc scripts out there to grab user info directly from seti but I was curious if anyone had written one to grab info from a setiQ?
I really like my K7S5A though it doesn't have any OC features which I really miss and the onboard sound isn't that great if you're planning on playing alot of MP3's.
Definetly go with a good name brand PS. The max wattage IMO isn't nearly as important as getting a quality PS. I was originally using a 300 watt AMD approved PS (can't recall the brand) and had random crashes alot. I swapped it with a 2 year old PS I had lying around which was an Aopen 250 watt...
teknodude
My intention was not to crap on anyone's thread. It's just that quite a few of us TAT'ers play the same online game together (at one time we had around 40-50 TAT'ers in our clan mostly Distributed Computing guys who are members of TeAm Anandtech) and many of us have had our resets...
YU22
Not any mind reading required when you have people who regularly check the ip logs of all of your clan members, daily mentoring going on (not sure about utopia but we have a clan site where users upload their status daily to the site) which makes it easy to see if they are doing things...
If you would spend as much time learning the game as you are at trying to find ways to cheat without getting caught you might actually become a good player instead of just another wannabe who has to cheat to do well.
Sigh.....I've been online gaming with many TAT'ers in one of Utopia's sister...
Lol @ ElFenix surely you can remember back farther than that.:)
I remember when hitting 1200 was a great day and sub 1000's were common. I was fairly certain you were around back then as well though I may be mistaken. :D
I think the & was left out so seti would show up. Then after it was told what email addy to use the & was going to be added so that it would run in the back ground.
It can take quite some time for seti to launch when you run it like that. If I'm not mistaken doesn't that tell seti to launch at...
LOL I had quite a time as well but didn't encounter any of the problems you have had so far. I do like linux more now after fighting with it for a few days and vi does get easier with time. :D
/me runs and hides :o
Hehe congrats Phiton. If I remember right we once raced and I am ashamed to say you now have almost 7 times as many wu's as I do. :)
Not sure about the error message, I'm still a linux newb myself.
As for the client it depends on your system if it's a 386 then you would need the 386 client.
Post what kind of system you've got and I can help ya find the right client if you don't already have the right one. Maybe one of the...
Hehe I bet it did JW. :)
Just adding my linux gateway helped my production out though it's so slow I still get a few vlar's in winME sometimes. :(
I am planning on adding another Linux node to my network in the next few weeks though so maybe that'll help me out some more. :D
Well I'm a Linux newb myself but I can tell ya what I learned from my experiences installing seti on the smoothie. :D
This may seem like alot or a bit complicated but I tried to write everything out step by step since I know how confusing it is for the linux newb when someone tells ya to do...
LOL glad I could be of help. :)
I guess since you are worried about having enough power for web caching then you definetly don't have enough power to spare for seti on your smoothie. :D
I'm sure you could do it manually somehow, though it would be a bit of a pain.
If you have a linux machine connecting to your Q you can turn on setiQ's vlar routing and it will send most of the vlar wu's to the non-windows que. I have both windows and a linux machine connecting to my Q and...
Not sure if ya ever got this going or not but I checked anyway. :D
I just turned on smoothwall's web caching and set it to transparent and everything worked just fine without having to specify any ip's or ports. Smoothwall is designed to provide a seamless connection to the net. Basically...
Hmmm I don't know all that much about networking or win2k but it seems you are trying to make things more complicated than they have to be. I have no idea how much you know about Que or Smoothie so I'll just list my setup and some descriptions, however keep in mind that I am not running the web...
Thanks Rattledagger :)
LOL @ Robor :D
I finally got seti installed on my smoothie (linux gateway) so now I know I can definetly use vlar routing though the box is only a P2 @ 350 mhz. :D
Wow!!!!
Hehe the last time I was checking the daily stats on a good day we'd break 1200 wu's. :o
Looks like we have around 7 times the membership we did when I first joined way back then. :)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.