No. R4 does not support SDHC. You need a DSTT if you want to use a MicroSD bigger than 2GB.
Edit: It looks like newer R4s do support SDHC up to 4GB. Sorry for the misinformation. I didn't realize they had changed them.
You have it right Ryland. According to this thread, which includes messages from the author of DosBox, ID left out the "COPYING" file (which, as I recall, is the license) but has since corrected the issue.
The GPL does not require that you release your source code if you are using a GPL...
If you buy the Samsung at ChiefValue, there is a $5 off coupon code right on the product page, making it $114.99 shipped so the difference would only be $15.
Thanks! Here is the link to the thread with the modded BIOS and the newest flash tool which you must use. It looks like it does have PCI and PCIe lock. It looks like the PCI lock may not always work though.
Has anyone here found a modded BIOS for this board based on the v14 ABit BIOS? I am looking for a modded BIOS that has a PCI lock and is based on ABit's v14 BIOS.
It should work using the adapter. Note that the Wii does not currently support SD cards over 2GB. Thus this card should work, but it is not necessarily correct that "any" regular size SD card will work.
If you are talking about the Gigabyte i-RAM, the company is still in business, the drive is really hard to find though, and the maximum storage is 4GB (8GB if you RAID two of them).
Has anyone here tested the Zalman 7700 in a Microfly (and if so, does it fit)? The 7000, which "just barely works" in the Microfly, is 109 x 109 x 62 mm, whereas the 7700 is 136 x 136 x 67mm.
Note that JonnyGuru found that when you tax the OCZ power supply heavily the voltage fluctuates outside of ATX specifications, which could harm your processor, GPU, etc.
Never mind ... see below. Thanks Thor86.
I also found this fan controller which has 4 pin connectors. You would think there would be more like it, but they seem to be hard to find.
Can anyone here point me to a fan speed controller for 4 pin fans? I don't need a four pin fan that comes with a fan speed controller, as the fans came with my case and now I just want to slow down those existing fans. newegg and Directron have controllers that take up a slot in the back of...
Ugh! You are right! I haven't had to deal with the absence of a PCI lock in a while and forgot about it. It looks like the best I could do would be to set the system bus around 166 and put the multiplier at Auto (i.e., the default 14x of the chip) for a 2324 CPU speed. That's not a bad...
Thanks all! The motherboard is a Gigabyte GA-7VAX (VIA KT400 chipset; CPU multiplier adjustable by DIP switch).
I dug up the following information from the Overclockers.com CPU database (prices are from newegg.com). It looks like the 2500+ is the best deal. Is it for sure unlocked? Does...
I would like to keep my Socket A motherboard but speed up the everyday operation of my Athlon XP 1800+ system. I have 512MB of Crucial RAM and a Radeon 9700 video card. The system is moderately overclocked. I am using Windows XP. What new processor do you recommend to speed up the system...
What? That will just block your Internet access (until someone changes your IP back). It's easier and more effective to just log out of the Staples site, which you absolutely should do if someone potentially untrustworthy will be using your computer.
UN-BE-LIEVABLE. It's pretty obvious what the issue is from the fact that you have to use the same computer, that automatically logs in, and then look at the response e-mail from Staples. I confirm that my password is viewable in plain text as well.
I love how it says "// For security...
There are $5 off coupons around for JustDeals. There may be larger coupons for all I know too.
Remember that a lot of Z-680s have a problem with the bass humming (when no sound is otherwise being sent to them) due to something associated with the control pod. It wouldn't surprise me if...
I have a soft-modded 9800SE. It runs Doom 3 and Half-Life 2 fine with no artifacting. Unfortunately it is not fast enough to run anti-aliasing in Half-Life 2 with satisfactory frame rates though. :(
Native multiplayer is available in the update they released today.
Also, there are patches that will convert the retail version to the steam version so that you don't have to use a CD.
I have used the old Logitech infrared cordless keyboards with the MX700 mouse and had zero problems. That probably means the MX1000 will work with such a keyboard.
Update:
So I asked this same question of HP tech support by e-mail, and they basically responded that --
1. Networking the printer may work, using the 550C driver, though they don't support it; and
2. They don't recommend putting anything other than a parallel cable between the 1170cxi...
I hate to disagree with you, but I put another relative's USB HP All-in-One on a print server at their house and it works just fine. There was a document on the HP support site about how to do it. You just need to use a substitute printer driver for another HP inkjet printer (as opposed to the...
My relatives have an HP 1170cxi All-in-One parallel port printer. They have two computers and are successfully printing to the printer from both computers using Windows printer sharing. Of course, that means the directly-connected computer must be running for the other computer to print.
I...
$47 more, 512MB RAM, 120GB HD, probably worse case and equally poor power supply:
Passable case and 350W power supply - FAR (Fry's last weekend)
2.8GHz CPU and MB - $250 pick up at store (http://shop1.outpost.com/product/4106803)
512MB PC3200 - $55 pick up at store...
Set the primary boot device to SCSI. That should cause it to go straight to your SATA drive and boot from it.
Edit: I see you figured it out while I was posting ...
I am trying to set up two Western Digital 120GB drives (IDE drives with SATA adapters, e.g., Highpoint Rocketraid) to run in RAID 0 configuration on a VNF3-250. I set up the BIOS for RAID, then hit F10 during boot and create the RAID array, then boot from CD to start Windows Setup. During...
The game has been in development for several years. Thus, it was designed from the start for non-existent video cards. Due to their good foresight as well as information from ATI and NVidia about their upcoming plans, those non-existent video cards have recently or are about to come into...
I have a Chaintech VNF3-250, but I could put in a PCI sound card if necessary. What I want to do is play sound out of the 5.1 analog sound ports and at the same time play the same sound out the digital sound port. Is this possible? What I am trying to accomplish is to have the same sound to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.