How can you confirm it's for a pair of speakers?
Outpost show $149 right now but no information if it?s each or for a pair.
Polk?s website shows $159.99 each for the RTi4 as well.
Dan D
When I took the heads of my Corvette the cylinders still had the cross hatching at 50,000 miles. I say M1 is worth it.
When we pulled the covers off my SHO for its valve adjustment we found no wear on the shims that ride on the cam.
Also your aluminum engine used metal sleeves as aluminum it...
I had my Vette up to 135 once before I modded the thing. Its dam scary once you get past 120. I can't believe someone would take pic doing 110.
At 125 my old Saleen S351R felt like it was going to take off.
Back to the topic GTX is good but I use M1 in my cars. I also use the OEM filter...
I had the same problem. There is on issue with the installer after you deinstall the software.
I contacted the author and there suggestion was to just download the ZIP and Uncompress the program.
No problem running the program now.
I have the PC2-C Case. I love this thing.
It cools alittle better then the Alpha 8045 but its really quite compared to the fans running full tilt in the Enlight case that I had setup.
The heat exchanger looks good but its inclosed. The Swift Model looks really good. The RAD is outside the case...
I have the PC2-C Case. I love this thing.
It cools alittle better then the Alpha 8045 but its really quite compared to the fans running full tilt in the Enlight case that I had setup.
The heat exchanger looks good but its inclosed. The Swift Model looks really good. The RAD is outside the case...
I have the PC2-C Case. I love this thing.
It cools alittle better then the Alpha 8045 but its really quite compared to the fans running full tilt in the Enlight case that I had setup.
The heat exchanger looks good but its inclosed. The Swift Model looks really good. The RAD is outside the case...
I have the smaller one. I love it and its quite.
The CPU is around 35C 95% of the time. That's with the fans turning at 1,500RPMs.
I have pictures on my web site.
I received mine last night. The seal was broken just like the other persons post.
Everything was there including the USB and Para cables.
I sent in the rebate today so will see what happens.
I have one. It cools the P3 Down really well.
The heat pipes can get in the way with some motherboards. I had to remove the fan on the northbridge to make it fit.
The fan is loud but I used the 10V line supplied with the Silverado to take it down some.
See my web site to see what I mean about...
I was getting 6000 when using WinME and all the latest drivers.
I switched to WinXP with just the NVidia drivers and now I'm a little over 8000. No change in the hardware, just the OS.
I've got mine at 2000 from 1800. I had to up the voltage some otherwise 3DMark2001 would crash during the dragon show.
I also used the Defogger Kit from PepBoys to connect the bridges. Instead of SuperClue I used Testors Model piant to fill the gap.
I've done all three of my AMD proccessor with...
Just be careful. I had two MB's that didn't work that I bought as refurb. I'm still waiting for a refund. One blew a 950 Duron!!
I bought two new boards instead and had no problems.
I received my 10 NICs on 01/11. I already used 3 of them in machines I was building for friends. WinXP picked up the card and installed the driver automatically.
I have three of these. The last two I bought I found I needed to drill the holes for the case fan.
At least now I know what the black pins are for!!! I didn't see them until I was done.
Overall I think they work great for the money.
I have a PIII Coppermine Socket 370 800MHz that needs a new home.
I want to OC so what's a good OC Motherboard?
I keep looking at the MSI 694T PRO (MS-6309 v5.0) and the ASUS VT82C694T.
Should I stick with the 815 chipset or is the VIA going to be fine.
Thanks,
Great case. See SIG for temps.
First I have a Panaflow L fan above the Water reservoir for circulation. Remove the bottom hard drive cradle then slide the fan and cradle back into place. I also have a Pana L exhausting the case and a Pana L pointing at my GeForce 3 to cool the memory.
I plan...
For the full tower information look here;
http://www.koolance.com/news/release122101/
I'm cooling my OC'ed GF3 Chip and my OC'ed XP1800 with no leaks or problems. Currently at 2000+ with a higher Vcore.
I love it and would get them for the kids workstations if money was no problem.
My sons P2 450 just went out.
I want a system that can use the Kingston 256 PC133 I just bought so I need a suggestion for a MB that uses PC133 and an AMD Duron.
What would be the best Chipset that supports the Duron and PC133. Dual support for DDR would be a plus.
Also which Duron is the...
Agreed but the orb fan was the loudest fan in the whole case. Even with the plexiglass on you could hear it spinning.
I picked up the Zalman Universal Fan Bracket to add a Panaflow L fan above the GF3. This should keep the ram cool enough to OC the GF.
I'm a long time lurker but a first time poster.
With my Koolance setup these are the temps I'm seeing. The case has a Panaflow L 80mm fan exhausting air.
At Idle
CPU Sensor 36
MB Sensor 24
Water Block 25
Home Temp 19
At Load with Prime95 after running 6 hours
CPU Sensor 41
MB Sensor 25
Water...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.