Search results

F
Front USB MOD guide

Nice tutorial! You'd think one of these companies would MAKE something like this so you wouldn't have to mod it... yet I haven't seen anything that fits in the 3.5" bays as of yet. I bought the Antec Easy USB, which was really nice since they include a cable long enough to reach your...
- flywheel
- Post #3
- Jan 30, 2002
- Forum: Cases & Cooling
F
Panaflo 80mm Quiet Fans

Did those come with molex connectors or are they just bare wire. Bare wire would be fine if you're running a fan bus but since I'm not, I'm curious. Can you even buy molex connectors if you have to wire it up yourself?
- flywheel
- Post #6
- Jan 30, 2002
- Forum: Cases & Cooling
F
Panaflo 80mm Quiet Fans

man...I feel kinda ripped off. I had no idea you could get a case fan so cheap. I recently paid $10 for an OEM 80mm Sunon case fan. I do like it but I thought that was kinda spendy considering the little shop I bought it from didn't even want to give me screws for the thing and then when I...
- flywheel
- Post #3
- Jan 29, 2002
- Forum: Cases & Cooling
F
need your suggestions!! which printer for me???

I was looking for the same thing. I ended up, after doing quite a bit of research, narrowing it down to the Canon S630 and the HP Photosmart 1115. The Canon is supposed to be better on ink and has seperate ink cartridges so I was certain this is the one I would go with. However, after seeing...
- flywheel
- Post #3
- Jan 28, 2002
- Forum: Computer Building
F
fan wouldn't spin up

thanks...got her working, I just wonder what causes these problems so I'll get better at troubleshooting.
- flywheel
- Post #3
- Jan 27, 2002
- Forum: Computer Building
F
Can't open sites with ? in the address

glad you figured it out!
- flywheel
- Post #12
- Jan 27, 2002
- Forum: Computer Building
F
Can't open sites with ? in the address
- flywheel
- Post #11
- Jan 27, 2002
- Forum: Computer Building
F
Can't open sites with ? in the address

Have you tried a mirror of your IE advanced settings with the machine that works to the one that doesn't? Seems that it should be a Javascript error or something but IE6 should have no probs with Javascript. Lemme know if you figure it out.
- flywheel
- Post #8
- Jan 27, 2002
- Forum: Computer Building
F
fan wouldn't spin up

I took apart my old mobo/CPU setup that my friend had built for me since I recently braved the world of DIY computer building. The board was a Baby AT Matsonic and had several small problems. I found that a jumper on the board was set for Slot 1 instead of Socket 370, which is what's on the...
- flywheel
- Thread
- Jan 27, 2002
- Replies: 2
- Forum: Computer Building
F
who is the most beautiful actress...?

Salma Hayek
- flywheel
- Post #135
- Jan 13, 2002
- Forum: OT Discussion Club
F
500 mhz Celeron mobo suggestions???

Can anyone suggest a fair priced mobo for a 500 mhz Celeron. It will be going in an AT case. The mobo in this case now is a baby AT so I assume that I'll be looking for another baby AT b/c I'm not sure about the case-- I think it's unbranded. It has a 250W PSU if that makes any difference...
- flywheel
- Thread
- Jan 11, 2002
- Replies: 0
- Forum: Motherboards
F
My GF3 is making noises [UPDATE: Found source. Still need help]

Sounds to me like you have the same exact problem that I had with the chipset fan on my mobo. See my site @ flywheel.cjb.net for my info on my situation. If you do end up replacing the fan and there's a heat sink under it on your card, the fan replacement should be rather simple. Make sure...
- flywheel
- Post #7
- Jan 11, 2002
- Forum: Computer Building
F
Need advice on modification of USB Plug to fit Header on AK31A

did you get it to work? I'm getting ready to do the same exact thing and was looking at buying something like this but I was afraid the connectors wouldn't match up to the mobo headers. What kind of USB front panel did you end up getting?
- flywheel
- Post #5
- Jan 9, 2002
- Forum: Motherboards
F
Front USB panel

I want to buy a front USB panel for my case to go along w/ my Shuttle AK31 mobo. Does anybody know how I figure out which one to buy? I was going to get something like this-- usb panel. I'm not sure if the connector will match up to the extra headers on my mobo though. Can anyone help...
- flywheel
- Thread
- Jan 9, 2002
- Replies: 0
- Forum: Computer Building
F
Best digital camera's under $500 - your opinion..

I've done a lot of research on this...and it seems to me that either the Olympus 3040 or the Kodak 3900 are about the best cameras in that price range if you want a 3.1 megapixel. I've read a lot of good things about Canon's new G2, I think is the model...but it's pretty spendy. The Kodak is...
- flywheel
- Post #8
- Jan 7, 2002
- Forum: Computer Building
F
chipset fan necessary?

<< Hello, I have a Shuttle AK31 ver. 3.1A and have been happy with the board. However, the chipset fan makes all kinds of crazy sounds. If I'm not going to be overclocking at all, do I even need to use a fan or heatsink on the chipset? I have two fans blowing air into the case, and two...
- flywheel
- Post #12
- Jan 6, 2002
- Forum: Cases & Cooling
F
What CPU can I use that requires a heatsink only without a fan!?

<< Look no further! This is what I use and am very happy with it. I can't hear this fan over my power supply fan and it knocked my temps down 10c! >> That thing bolts to the mobo!!! That's scary to me! I mean...with that big of a heat sink I can understand not wanting to tear your socket...
- flywheel
- Post #20
- Jan 6, 2002
- Forum: Cases & Cooling
F
Dead PCI slots in my Shuttle AK31 r3.1 mobo

I haven't had any problems yet but I'm only running my sound card in 2 and my modem in 4 (counting away from AGP, as you did). I hope this isn't going to be the case...it's one of the reasons I went with this board--in case I needed those slots. I did have my chipset fan go out on the north...
- flywheel
- Post #6
- Jan 6, 2002
- Forum: Motherboards
F
Does Maxtop make a good case?

I actually already have the Enlight 7237. I thought the blowhole and extra case fan was nice for the same price though. Though about recommending it to friends...possibly. I'd like to have some history w/ their power supplies though.
- flywheel
- Post #3
- Jan 6, 2002
- Forum: Cases & Cooling
F
Does Maxtop make a good case?

new egg has a good price on one of their cases. Just went up on the site...one review says the PSU isn't too great.
- flywheel
- Thread
- Jan 6, 2002
- Replies: 3
- Forum: Cases & Cooling

RESOURCES

Top Bottom