The software won't use a GPU to encode. And the system does slow to where you are not able to do other things at times. I'm thinking of just reusing the case, drives, ext. Just replace the MB, CPU, and RAM.
I have no micro center anywhere close. I have to order everything I get online. Southern Illinois
And the software vendor has not updated since 2021. They just list that to reduce CPU load is to have at least 1 core for 2 cameras. And to reduce frame rate of the cameras.
I was told they are...
I am needing to upgrade my PC. I use it to process and record security video at my home. I use a software called sighthound video. I have 27 cameras recording 24/7. My current system runs a very high CPU load(90% or more). The motherboard died on my current system, so now is a good time to...
Why are my open browser and apps snapping to a small size a on my screen? Gets very annoying when trying to navigate and everything shrinks.
See my pics of it below
Sent from my Pixel 3 using Tapatalk
I am trying to connect to my home network from outside. All the hardware I listed is behind my router. I am worried because I have to open up certain ports for the IP cameras to be accessible from the WAN.
The edge router has L2TP built in. It is just not configured.
"Ubiquiti -...
Hey all,
I am completely new to VPNs and am needing some advice on how they would work for me. My home network is as follows.
Edgerouter X 100gb internet
1 NAS
Various android phones
Various security cameras
Smart things hub
5 computers
Computer "A" running a security camera software and a pet...
How do you change the lock screen timeout in Windows 10. I have tried the directions in this post but it doesnt work. All I did is the manual registry change. Then went into the advanced power plan settings and change it to 99. Still times out after a minute and reverts to lock screen.
I am looking at the Ecobee thermostats. I don't need the remote sensors at all. Should I get a 3 or a 4? Looks like all the 4s come with sensors and a higher price tag
Sent from my SM-G920V using Tapatalk
I want to prevent cameras not recording if the link between the two homes go down. Thus the reason I am asking if it would be possible to to link 2 separate networks together and still.be able to record my cameras at both places
Both are on mast and have a clear line of sight. The problem is when power goes out in one building or the other. Or as was the other day. Flying debris in a storm hit one of the nanobeams.
The signal is great and work fine. It is the unexpected things that I worry about
Wired is not a option. Buildings about a mile apart. Both are empty houses of family members.
Here is a link to UBNT forum where I first set up the Nanobeams.
https://community.ubnt.com/t5/airMAX-Getting-Started-Product/Connecting-2-homes-about-1-mile-apart/m-p/1489582#M59108
I have a network setup between two buildings using ubiquiti Nanobeams. This network is not connected in anyway to the internet. It is only used for security cameras.
See the attached picture for a very rough layout of the network. My problem is, if the link between the two buildings go down, I...
Here lately when I go to Speedtest.net I get a latency error on my desktop. Every other computer in the house is fine. If I restart the computer all is good with it. I ussaly takes about a week before I notice the slow down and check my speed.
The computer is on 24/7. And most of the time I...
Not that I need to frequently power cycle them. But I have had one lockup from time to time. Only way to reboot is power cycle it. Since going to Hikvision cameras I have never had that issue. It who knows
Sent from my SM-G920V using Tapatalk
I have out grown my NETGEAR ProSAFE FS116PNA switch. I am needing to add about 4 more PoE ports.
Should I just add a second of the same switch? Or replace all together with something else.
I am running PoE cameras. They are all 802.3af class3 with a max of 5w per camera. I was thinking of...
At the moment I have 17 of the 20 allowed manual port forwards used. If UPnP would work I wouldn't run out of Port forwards
Sent from my SM-G920V using Tapatalk
I am having problems setting up port forwarding to access my cameras from both WAN and LAN. Let me tel you what hardware I am using then describe the problem.
Netgear WNDR3700v4 firmware V1.0.1.32
Hikvision and Foscam cameras
IP camviewer app on Android phone
DYNDNS.org as DNS service
If I...
Use a ubiquity p2p setup. Wireless bridge your best bet unless you want to go buried cat5
I use a nano station on each end of my bridge.
Sent from my SM-G920V using Tapatalk
Never say never. My 4 cameras turned into 14.
I use 2 netgear FS116PNA. I see no need for a managed switch in a home network
Sent from my SM-G920V using Tapatalk
This computer about 6 years old. I am testing some old hardware I am selling. Then gonna get rid of the computer also. Cleaning house. Lol
Sent from my SM-G920V using Tapatalk
The case is a generic. I used some Map Sensor cleaner left over from working on a car. Seems to be working fine now. Thanks for the help
Sent from my SM-G920V using Tapatalk
How can I clean the power button to my case. It sometimes sticks and I have to physically pull it out or the computer continually restarts every few seconds.
Electrical contact cleaner?
Sent from my SM-G920V using Tapatalk
Going through a repeater will make a big difference on speed depending on the repeater. Just as signal strength makes a difference on speed.
What speed do you get hooked to the router wireless in the same room as the router? 100% signal and not using repeater
Sent from my SM-G920V using Tapatalk
Same one I have. Setup was very easy for me. I have a 2500sq ft home all one level. No problems at all here. Basically in the center of the house
Sent from my SM-G920V using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.