Search results

A
6950 Owners report in

2 Sapphire 6950 in Xfire. Using the unlocked Sapphire 6950 bios at 880/1325 with no problems.
- ALBPM
- Post #2
- Jan 16, 2011
- Forum: Graphics Cards
A
**OFFICIAL ASUS P4B533-V (845G) THREAD**

James the inf driver is on the CD that came with the board. Thanks Ardy!!! I have a SL67Y OEM and it will only go to 156 FSB. I've ordered a retail 2.26 and I'm hoping it is a SL683 like yours. I'm building another system with the P4B533 (845E) board that I got before the P4B533-V came out...
- ALBPM
- Post #159
- Jul 8, 2002
- Forum: Motherboards
A
**OFFICIAL ASUS P4B533-V (845G) THREAD**

Hey Ardy, what's the S number of your 2.26?????
- ALBPM
- Post #156
- Jul 7, 2002
- Forum: Motherboards
A
**OFFICIAL ASUS P4B533-V (845G) THREAD**

After a week of playing with my P4B533-V I've managed to get my P4-2.26 up to 156MHz FSB. I switched from the P4B533 (845E) version because I have 2 X 256 of Samsung PC2700 and I could only get the 845E board up to 154MHz FSB. So, the memory was only running at DDR308 due to only having the 1:1...
- ALBPM
- Post #144
- Jun 30, 2002
- Forum: Motherboards
A
**OFFICIAL ASUS P4B533-V (845G) THREAD**

Darn it!!! My P4B533-V is sitting in the local UPS facility till Monday. I was hoping to have it this weekend.
- ALBPM
- Post #124
- Jun 22, 2002
- Forum: Motherboards
A
**OFFICIAL ASUS P4B533-V (845G) THREAD**

I have a P4B533-V on the way. I'm currently using the P4b533 (845E) which is an awsome board but my PC2700 is running underclocked. I got mine at Allstarshop: Allstarshop
- ALBPM
- Post #102
- Jun 20, 2002
- Forum: Motherboards
A
-

Anyways my setup is a P4-2.26, ASUS P4B533, 2 X 256MB Samsung PC2700. I have booted into XP at 2.720, 160FSB but it gets a bit hot and reboots if stressed. CPU 2.720 Currently I can run stable at 155FSB,1.65v, 1:1 memory, 2.5/2/2/5. CPU 2.634 I've ordered a better fan for my ALPHA PAL8942-T...
- ALBPM
- Post #21
- Jun 15, 2002
- Forum: CPUs and Overclocking
A
-

Same here...I always use a DOS boot disk. I kept getting "Read-Open file" errors trying to install Beta "P4B533-1007.003"
- ALBPM
- Post #19
- Jun 15, 2002
- Forum: CPUs and Overclocking
A
-

I have a question regarding the Beta Bios. The filename is P4B533-1007.004 and I can't open it in DOS. Do you re-name this file or what do you do with it since it isn't a ".awd" file?????:o
- ALBPM
- Post #16
- Jun 15, 2002
- Forum: CPUs and Overclocking
A
Best socket A heatsink!

Here's a good comparison. The heat sinks are listed from best to worst performers. The higher the "COP" number in % the better design or efficiency and the higher the T(r)- T(cold) the better the performance. All heat sinks were lapped for these tests. COP Data
- ALBPM
- Post #32
- Feb 4, 2001
- Forum: Cases & Cooling
A
Best Intel HSF?

For a slot1 coppermine the Alpha P3-125 is the best.
- ALBPM
- Post #3
- Feb 2, 2001
- Forum: Cases & Cooling
A
Trainwrecker's Heatsink Tests

Sorry about the confusion GiZzO. I wasn't real clear on how to evaluate the results. Look at the cold side temp and then the Higher the T(t)-T(c) value the better the performance. The COP value or Efficiency score shows the design efficiency and how air flow or CFM can can affect this. So...
- ALBPM
- Post #7
- Jan 20, 2001
- Forum: Cases & Cooling

RESOURCES

Top Bottom