Search results

M
FLASH 9800 Pro 128mb?

yeah right, you will be able to overclock your card much higher with Xt bios flashed in, and XT is enabling some features like Overdrive and you will gain 5% performance gain in the same Clock frequency, but there are many users that don`t know about this thing, Xt bios is enabling some shader...
- Mk1980
- Post #10
- Mar 12, 2005
- Forum: Graphics Cards
M
AGP Value Card

If you won`t have chance to purchase 9500pro 128mb card, then buy that Radeon 9550 128mb 128bit, it`s very good card ;-), but 9500pro radeon is much more better :-)))
- Mk1980
- Post #4
- Mar 12, 2005
- Forum: Graphics Cards
M
Bought a fake Barton 3200xp..help! *PICS*

you need to increase voltage, to etc. 1,675, 1,7v and try it ;-) there could be simply reason for instability of your system, my motherboard etc. is running at 1,65v but in real it runs only at 1,61v, if it is also your problem, then there is no wonder, that your cpu is on 2,2ghz instable...
- Mk1980
- Post #18
- Jan 15, 2005
- Forum: CPUs and Overclocking
M
MSI 9800 Pro (Green PCB) with Silencer 3 Question?

I have this card, it is working great with VGA silencer rev.3, but you`ll need to install output plastic connector carefully from the original MSi radeon9800pro cooler, because plastic connector on Silencer is different , and you need to replace it with original Msi connector. I have purchased...
- Mk1980
- Post #2
- Jan 14, 2005
- Forum: Graphics Cards
M
RADEON X800 SE

sell it to someone, best option, or overclock it highest as possible
- Mk1980
- Post #15
- Jan 12, 2005
- Forum: Graphics Cards
M
9600 256 ddr

sorry for my english, I have edited my message, I hope it`s better now :)
- Mk1980
- Post #11
- Jan 8, 2005
- Forum: Graphics Cards
M
9600 256 ddr

it is no wonder that any 9500pro beats 9600XT , and 9600 256 mb original non Pro is only light 9600 and has extra slow memory running at 400 or 444mhz only, it is so poor card, waste of money, and Shine point(dark point) of what can this f...g numbers on cards do to non advanced users, total...
- Mk1980
- Post #5
- Jan 6, 2005
- Forum: Graphics Cards
M
6600GT 256MB nVidia's response to X800XL 256MB??

ok, but it is not 6600GT but Dual 6600GT, which is EXPENSIVE CARD it is not really what Nvidia supports, you haven`t read the whole article, it is card with 2 6600gt chips on board and 256bit memory bandwith, then there is no wonder that it is performing like monster. In fact there is no...
- Mk1980
- Post #2
- Jan 5, 2005
- Forum: Graphics Cards
M
X700Pro or 9800Pro ??

I think best is to buy X700pro, because when you will overclock it, you should have card faster then 9800xt, but you have to pick up best piece for overclocking, good luck ;-)
- Mk1980
- Post #11
- Dec 28, 2004
- Forum: Graphics Cards
M
Way to overclock 9800pro 128MB

Oh sorry for my buy advice, you have 128mb 9800pro already ;-), good luck with overclocking, you have to buy two sets of very small memory heatsinks from thermaltake(two on one pair of memories), and put there Silencer rev.3, you will be able to push that beast to max, ;-)
- Mk1980
- Post #3
- Dec 6, 2004
- Forum: Graphics Cards
M
Way to overclock 9800pro 128MB

Yes you can do it easily, my friend has his Sapphire 9800pro 128mb overclocked from 378-676 to 470-800, and that`s really great, he is using Arctic Cooling Vga Silencer Revision3(high rpm) without memory ramsinks, pretty cool memories at 800mhz. Mine Msi 9800pro 128mb is overclocked to 425-724...
- Mk1980
- Post #2
- Dec 6, 2004
- Forum: Graphics Cards
M
Catalyst AI Optimizations examined by anandtech

you are right I get also up to 4fps with humus tweak and another 3fps with this beta driver hotfix, which includes oficially or unoficially CATALYST AI!!!!!!! http://www.ati.com/support/infobase/4649.html download it, Doom3 runs now Awesome on my 9800pro 128mb microstar, 416,5-725...
- Mk1980
- Post #40
- Sep 29, 2004
- Forum: Graphics Cards
M
Catalyst AI Optimizations examined by anandtech

Hi , can you give me a link to latest humus tweak for Doom3? thank you a lot if you can :-)
- Mk1980
- Post #36
- Sep 27, 2004
- Forum: Graphics Cards
M
Info please, 5700 Ultra vs 5900?

5900 se is able to overclock well, and in that option it is in some situations up to 50% faster the 5700 ultra, visible difference at first sight, 5900 is perfect and only good line of FX cards in these days, till another pixel shader 3.0 cards will be out there in April :D
- Mk1980
- Post #6
- Feb 21, 2004
- Forum: Graphics Cards
M
Best Ti4200 card?

I`m not sure that Gainward makes good geforce4 ti4200 cards, I have one piece of ti4200 128mb golden sample gainward, it was able to overclock to 310\580 but it was crap card, I have crash screen problem in windows Xp after 6months after purchase, I have got Gainward agp8X ti4200 128mb golden...
- Mk1980
- Post #32
- Feb 21, 2004
- Forum: Graphics Cards
M
Thank God Almighty!!!The ORIGINAL nVidia BRAND NEW 43.45DETs are here!!!

Hi, I have tested these 43.45 from Nvidia, and I get 20fps in some scenes in Unreal 2 with 1024x768, on Athlon xp 2400+ overclocked to 12x185 aka 2220mhz, xp 2750+, and 1GB DDR 333mhz memory Cl2, win xp., on ti4200 8x 128mb from Gainward 295\605, and with detonators 42.86 I have get in same...
- Mk1980
- Post #51
- Mar 29, 2003
- Forum: Graphics Cards
M
Got a Gainward Geforce4 TI4200 128M now what?

I have it with 4.0ns samsung chips, running at 314\600 no problem little artifacts for memory sometimes after hour of play on some game all superb on 314\597 about :cool: P.S. play with that baby bit more :D
- Mk1980
- Post #5
- Mar 3, 2003
- Forum: Graphics Cards
M
Powercolor non pro Radeon 9700 ??? is clocked normally??

Thanks a lot for help, I will speak with supplier ;)
- Mk1980
- Post #6
- Mar 3, 2003
- Forum: Graphics Cards
M
Powercolor non pro Radeon 9700 ??? is clocked normally??

yup, ok, thaks a lot, but I have heard that many people have purchased these cards and they received underclocked versions, below specifications of standard 9700 clocks, but if it`s true that it has clock frequencies on 275\540 it is best bang for the buck in this country, COOL
- Mk1980
- Post #3
- Mar 3, 2003
- Forum: Graphics Cards
M
Powercolor non pro Radeon 9700 ??? is clocked normally??

Hi , I have question abou this Powercolor especially radeon 9700 card. If it has ati clock speed of 275\540, I have heard in this forum before a few months that this card is underclocked against official 9700 radeon, is it true or not??? I am really interested in this card, because it has best...
- Mk1980
- Thread
- Mar 2, 2003
- Replies: 5
- Forum: Graphics Cards
M
BFG Asylum ti4200 OC Stat

Mine gainward GF4ti4200 128mb 4ns memories, could be overclocked to 313\600 no problem and memories with better cooling could go over 600 bit
- Mk1980
- Post #36
- Feb 2, 2003
- Forum: Graphics Cards
M
GF4 ti4200 128mb

My Gainward Gf4ti4200 128mb GS with 4.0ns rams, running 312\595 with no problems, also with addition cooling it will do 330\610 with no problems I am sure, they have great 2d quality too, excelent on mine Nokia monitor
- Mk1980
- Post #12
- Jan 4, 2003
- Forum: Graphics Cards
M
RADEON 9700 Pro @ 300/265 WTF?***UPDATE***

Give those sh.t cards back to them, you have far more slower these two from official speed cards, wtf, f..k radeon policy,, no problem with this in GF4ti cards line, they haven`t been clocked lower then specs from Nvidia,, manytimes higher for lucky users
- Mk1980
- Post #21
- Jan 4, 2003
- Forum: Graphics Cards
M
GeForce 4 Trouble!!!

You should buy Epox 8rda+ with Nforce2 for you, then 2x256ddr333 or ddr400 cl2 for unleashed dual ddr2 performance, and upgrade also your bios on that motherboard, and finally buy Athlon XP Thoroughbred B revision Xp 2400+ for sure best, but there will be 1800+ thoroughbred B in 2 months for...
- Mk1980
- Post #11
- Dec 30, 2002
- Forum: Graphics Cards
M
Which brand of DVD player would you recommend me??

Hi, I am in time trouble, tomorow, I am going to pick up toshiba new DVD player, newest type I know, I was in decision about Pineer and Teac too, especially tea my friends told me even the worst DVD`s was easily readable on Teac DVD rom, ok, and what is your opinion, is anybody of you user of...
- Mk1980
- Thread
- Nov 14, 2002
- Replies: 5
- Forum: Peripherals & Components
M
O/C'ing GeForce2 MX-400

HI, I read previews, you can see all on www.8dimensional. com in section on left graphic cards and then g2mx group select, and you will find all previews of your card. By the way it is best g2mx overclocker, with overclocked asus 7100pro you can achieve performance of Geforce 2 GTS with ddr...
- Mk1980
- Post #2
- Nov 2, 2002
- Forum: Graphics Cards
M
Need overclocking tool for det. 40.72

Hi I am using detonators 40.72 and I have request for program which allow me to change frequency of card GF4 ti 4200 128mb Gainward. Thankie, many programs aren`t working for these ones
- Mk1980
- Thread
- Oct 25, 2002
- Replies: 5
- Forum: Graphics Cards
M
**The OFFICIAL AROIA, AGOIA (Whatever Athlon Xp you've got) thread and post all other questions regarding them here. **

Hi people, I have my Agoin Xp1600+ with Epox 8k5a2+ going rock stable on 164fsb only, I wasn`t lucky?? or many are worst from mine, I heard also that are. But on 164-5 fsb my mobo is giving on 133mhz memory setting and turbo 5% better performance for me than 166fsb setting, so I am happy 1,73Ghz...
- Mk1980
- Post #55
- Oct 5, 2002
- Forum: CPUs and Overclocking
M
Is my fps good in Ut2003???

Hi I have upgraded my system from Athlon C 1333 256sdram, to Athlon xp 1600+ for overclocking,, with ddr333 , 400 I will have for faster memory settings over 166,,, I set fsb to 166, but on every voltage system has rebooted after hour or two, memory ddr333 with cl2,5 wasn`t doing job on this...
- Mk1980
- Thread
- Sep 28, 2002
- Replies: 1
- Forum: Graphics Cards
M
UT2003 quality tweaking

Thankie , now those textures looks much more better, but original Ut2003 will have 2times better then these setted to ultra high??? because in readme.txt of demo is mentioned, that because of download size of demo textures have 2times lower resolution and, that mean they in original game will...
- Mk1980
- Post #8
- Sep 19, 2002
- Forum: Graphics Cards
M
G2 Pro vs G4 ti 4200 128MB under UT2003?

Hiii , where have you read that it will have bigger textures in rerail, I am not afraid with ti4200 128mb, but I am interested in this information, it means that final version will have nicer look and textures??? like high detail options in video settings for all parameters??? Give me a link...
- Mk1980
- Post #3
- Sep 17, 2002
- Forum: Graphics Cards
M
UT2K3 Demo / Ti4200 Benchmarks

Thanks for the links,, I have poor score on Athlon 1333 C 256mb Sdram pc133,, Gainward Geforce4 ti4200 128mb oc to 310\580 1024x768 Flyby 107,5 Bot 36,446 Is this score something like time to upgrade??? to 2ghz AthlonXp with Kt400 and ddr400 ???
- Mk1980
- Post #42
- Sep 16, 2002
- Forum: Graphics Cards
M
UT2K3 Demo / Ti4200 Benchmarks

those link upward isn`t working for me, anyone could give me addresses or links to this demo,,, plz
- Mk1980
- Post #33
- Sep 15, 2002
- Forum: Graphics Cards
M
UT2K3 Demo / Ti4200 Benchmarks

Give me a link to this demo plz
- Mk1980
- Post #9
- Sep 14, 2002
- Forum: Graphics Cards
M
question about voodoo drivers

V3 o V4, I don`t think that in this game it will do different image with the same driver of course in 16bit ;-), and I think I saw Amigamerlin 2.5 drivers for v3,4,5, in which is directx 8.0 or 8.1 compliant d3d driver, which is pretty good modified from well known man in 3dfx community...
- Mk1980
- Post #8
- Sep 13, 2002
- Forum: Graphics Cards
M
question about voodoo drivers

Hey, I have had voodoo3 and best driver in Xp is underground Alpha6 driver in voodoofiles, it has best and newest D3d files,, and it has newer d3d library then 1.09beta4 underground, install Alpha, it has really cool clean correct picture in Warcraft3 and I played this game on it, it is very...
- Mk1980
- Post #5
- Sep 12, 2002
- Forum: Graphics Cards
M
KT400 or KT333

Hi people, I like to buy 166fsb Athlon when it will come out,, and also new harddisk, so I have read that kt400 boards have Serial ATA on them, and it is quite important, also question, will be serial ata disk even better then ATA133 ??? Is there need for me to wait on serial ata or not, thanks...
- Mk1980
- Post #21
- Sep 6, 2002
- Forum: Motherboards
M
I've hit the limit of Rivatuner...

Hey which brand of card you have??? it sounds really good like advice to my friends, which haven`t got enough money for GF4ti series, and they don`t wanna to spend it on gr. card.
- Mk1980
- Post #6
- Sep 5, 2002
- Forum: Graphics Cards
M
Gainward GF4 Ti4200 128MB VIVO

whenever
- Mk1980
- Post #5
- Sep 5, 2002
- Forum: Graphics Cards
M
Gainward GF4 Ti4200 128MB VIVO

I mean certanly two coolers not too coolers, its one active cooling kit with 2 coolers on it, it`s very cheap.
- Mk1980
- Post #3
- Sep 5, 2002
- Forum: Graphics Cards

RESOURCES

Top Bottom