Search results

  1. N

    (Dead) I/O Magic or Pacific Digital 8x DVD±RW or Khypermedia 8x DVD+RW drives for "$69.99" AR at Officemax

    Now, why would I do that? Especially after I'd gotten the answer...But come to think of it, I wonder if this has anything to do with my cycling back of IE screens. If it's the case then my apologies for the annoyance :o
  2. N

    (Dead) I/O Magic or Pacific Digital 8x DVD±RW or Khypermedia 8x DVD+RW drives for "$69.99" AR at Officemax

  3. N

    (Dead) I/O Magic or Pacific Digital 8x DVD±RW or Khypermedia 8x DVD+RW drives for "$69.99" AR at Officemax

  4. N

    (Dead) I/O Magic or Pacific Digital 8x DVD±RW or Khypermedia 8x DVD+RW drives for "$69.99" AR at Officemax

  5. N

    (Dead) I/O Magic or Pacific Digital 8x DVD±RW or Khypermedia 8x DVD+RW drives for "$69.99" AR at Officemax

    Are you by chance anywhere near southern california in the vicinity of Orange County? If so, which OM store did you buy your burner from? Thanks
  6. N

    How do you merge 2 Divx files???

    Not knowing detailed spec's about your AVI, I don't know if the following will help... Can I join two video files with VirtualDub? Download VirtualDub and try it... Peace
  7. N

    v mod 3/4 for p4b533

    mlaine, Your "ACPI hal" as well as "page fault in physical memory" XP errors suggest that your RAM is getting overclocked but for whatever reason XP doesn't like it. ACPI pbs usually point to a conflict between low level BIOS settings and low level kernel components of the OS usually HAL or its...
  8. N

    v mod 3/4 for p4b533

    Sorry, mlaine, I didn't mean for you to disregard your second ram stick for good. I was only trying to help you figure out the hidden potential of your system in terms of RAM/board/CPU oc'ability above fsb=160 so you can zero in on the culprit. And to an extent you have as now you know that...
  9. N

    v mod 3/4 for p4b533

    mlaine P4B533-V, -VM and -M all have a total of 5 switches in DWS1 while your P4B533-E and the plain P4B533 use 6 switches for DSW1. Either way you should only be concerned with the high switch i.e. in your case that would be #6. I suggested few things for you to try out in that thread of...
  10. N

    v mod 3/4 for p4b533

    4:5 ratio above 132MHZ FSB's has always been there on my P4B533-V as far as I can remember... Peace
  11. N

    v mod 3/4 for p4b533

    I think you meant to say Auto has same results as 4:5. Your only alternative at this stage is to revert to an older BIOS rev. and see if this trick will produce 3:4 above 132MHZ FSB's. I have a P4B533-V but because I am using the on-board video my sandra readings are totally meaningless as...
  12. N

    v mod 3/4 for p4b533

    That's right! DSW2 has absolutely no effect whatsoever. The DSW2 dipswitch box is only intended as a multiplier to externally clock the core of "Unlocked"Intel CPU's. If you happen to be in possession of such a "gem" consider yourself very fortunate as your clocks would be setting new records...
  13. N

    Do RAM Spreaders/Heatsinks Work? Trying to get my Samsung DTL to 400DDR

    Generally, heat spreaders are used by vendors to hide true ratings of ram chips. I would only use them if and only if I know exactly what's underneath them. Peace
  14. N

    Poor memory performance with P4B533-E

    Hey Mlaine, just curious, can you tell us what the other 5 DSW1 settings are i.e. 1 through 5? I suspect your and other's board instability might have something to do with default settings for the other five dipswitches and their inherent AGP/PCI bus clocks. I know my question might sound dumb...
  15. N

    v mod 3/4 for p4b533

    I think the issue has only to do with the most aggressive memory timings! It would be nice to ask them what ratings their RAM chips have if of course those aren't hidden by heat spreaders. Peace
  16. N

    v mod 3/4 for p4b533

    Looks like most of my suspicions are getting confirmed! The trick seems to have a correlation with 133MHZ FSB's and above being hard-coded in DSW1 while still in "JUMPER FREE MODE" more than the mere flipping of the last switch itself. It's as if settings of DSW1 at or above 133 provoke clocks...
  17. N

    v mod 3/4 for p4b533

    Ardy, are you by any chance :) not mistaking DS1 with DS5 on the DSW1 DIP switch box of the P4B533-V. DS5 is the one closest to the CPU. On your P4B533-V, only DS5 should have been flipped around without touching or changing switches 1 through 4. FYI, your OFF ON ON ON ON corresponds to...
  18. N

    v mod 3/4 for p4b533

    Hey Bobbyeyes! Just when I thought this was a closed matter, you re-ignited it! I consider your findings crucial in terms of circumstances under which this trick would or wouldn't work. Asus couldn't have been that careless in allowing a hardware bug or "undocumented" feature if you will, to...
  19. N

    v mod 3/4 for p4b533

    Well, it looks like there is no new history to be written for the P4B266 although 3:4 is achievable in "Jumper Mode". Only inconvenience is its loss if CMOS is ever accessed again after 3:4 has been activated. Sorry to hear it didn't work out but it definitely was worth a shot! Peace
  20. N

    v mod 3/4 for p4b533

    Remember my question is only about two settings and in "Jumper Free Mode" of course. But if I you're curious about sniffing out 4:5 or 5:6, I have 30 more combinations in additions to my two. Let me know if you want me to post all of them for you. Peace
  21. N

    v mod 3/4 for p4b533

    SupermanCK, It's switch 9! The reason is if you scroll up and down the table of undocumented values that Thugs established at the time, you'll realize that 9 is the switch that causes bus frequencies to cross above 133 MHZ. Furthermore 3:4 is already achieved (although differently as jumper...
  22. N

    v mod 3/4 for p4b533

    I know that this trick is being achieved with Jumper Free Mode i.e. jumper "JEN" left at its factory default setting of pins 1-2 jumpered! You're just misunderstanding my statement/question. What I was trying to get from you is the actual cpu:ram ratio response for those two DSW1 settings in...
  23. N

    v mod 3/4 for p4b533

    Thugs, can you please verify on your P4B533 if this anomaly where memory is tricked to the next high ratio above its BIOS entry for the following DIP switch settings: OFF ON OFF OFF ON OFF ON ON OFF OFF ON OFF Note that although switch 6 is activated, as you suggest in this thread, the bus...
  24. N

    Dual processor server

    In general servers should not be overclocked so cpu stock hsf cooling should be adequate unless you're concerned about heat effects coming from other components (hard drives, video, raid, nic etc.) on the ambient temperature in the case. Even that can be addressed by properly choosing the case...
  25. N

    Samsung "true" memory - Registered?

    FYI, your P4B533-V is based on the 845G which only supports non-ECC, unbuffered and unregistered RAM according to spec's of the NB in the chipset. Yes, so far several test reviews of various vendor DDR dimms have proved "true" Samsung's rated only at 166MHZ/DDR333 aka. PC2700 to be the most...
  26. N

    Dual processor server

    Yes the ram bandwidth is the same 3.2GB/s. Note E7500 uses dual channel access in addition to Double Data Rate with DDR200 ECC DIMM's to achieve the same memory bandwidth as RDRAM PC800. Dual channeld DDR is not out for the desktop but is available for E7500. You basically will need to...
  27. N

    Dual processor server

    I don't know much about anything other than chipsets from Intel as I am aware about a handfull of them such as AMD, ServerWorks (I think they're now owned by Broadcom). You basically have a choice between E7500 (16GB DDR200 / No AGP) or i860 (4GB PC800 RDRAM with AGP). Obviously, the AGP...
  28. N

    I am on an asus P4B533 now !

    Dino, watching games too over here? What do you think is gonna happen in Italy vs. Mexico today? They had two goals disallowed against Croatia and to qualify, Italy is gonna have to beat Mexico today. I project Spain with either Brazil or Germany in the final. Sorry guys, I am into soccer...
  29. N

    -

    I had the same reaction as yours! I scrambled all over my calculator to see what this guy was cooking. 1)I suspect it's a different system and most likely based on an RDRAM clocking at 569MHZ which would not be uncommon since PC1200 RDRAM is readily available. 2)I think this might be an R...
  30. N

    **OFFICIAL ASUS P4B533-V (845G) THREAD**

    Bobbyeyes, yes you can do that provided the rating of your DDR RAM is at least DDR333 and that this board can handle those hi FSB's of yours. 5150Joker, the electric behaviour under overclocking loads according to your voltage measurements looks very promising indeed . If anything you know you...
  31. N

    **OFFICIAL ASUS P4B533-V (845G) THREAD**

    5:4 would result in underclocking RAM vs. CPU. In that case if FSB=160 ==>RAM=160/5*4=128 ==>DDR=256 resulting in a maximum of 8*256=2048 for sandra. With 4:5, RAM gets overclocked and FSB=160==>RAM=160/4*5==>DDR=400==> sandra maximum=8*400=3200 which is consistent with the results of...
  32. N

    **OFFICIAL ASUS P4B533-V (845G) THREAD**

    Hey 5150Joker! Few questions here if you would. 1)How hot are the CPU and NB at 160 FSB? What kind of cooling device are you using? 2)In jumper mode using dipswitch DSW1, can this board do the same thing as the P4B266 hack ie. use hard coded FSB's above 132 but fractioning them with a soft...
  33. N

    Which 512mb PC3200 DDR is better....

    Samsung with Samsung chips on Samsung PCB and without HS. Only place carrying them that I know of is newegg.com You need that part number if you decide to buy same dimm somewhere else.
  34. N

    -

    Let's see 2.5ns translates into 1000/2.5=400MHZ which would sync up with available GPU speeds in the same range and of course the large supporting bandwidth in the AGP bus. I think the main show stopper in transferring these standards over to system DRAM is intel's control over the CPU and...
  35. N

    Asus mobo for 2.0a p4?

    dvdaction, I recommend Asus just because I think their boards are among the best in sustaining adequate voltage and temps inherent to overclocking. Asus is very much aware of its competitor's overclocking plans. You will certainly hear about or see other boards overcloking (Abit, Epox, MSI...
  36. N

    -

    ThugsRook, that's all of there is to the list! I guess at the time that Asus was engineering the P4B266, they just didn't program 166 in the hardware but they did use this board up to 180 obviously. Peace.
  37. N

    -

    OK! Going back to the list at the very top of the thread looks like FSB switch settings for 66 and 170 are twins. Could it be???? Regardless, the following 3 are missing: OFF ON ON ON OFF ON OFF ON ON OFF ON OFF ON ON ON Peace.
  38. N

    -

    Sorry, I got carried away! You're right you did mention this to me yesterday that you were just making sure that the value was hardcodable with the dipswitch in 1:1 mode and once found you'd drive it into 3:4. Peace.
  39. N

    -

    Thugs, I think you'll find this of interest to your current focus on pivot 166 cuz intel is about to certify DDR333 with upcoming chipset releases and the addition of P4 2.66 which is probably a core of 133 mulitplied by 20. Note also the mention of DDR333 support in BIOS. Intel is just going...
  40. N

    -

    SupermanCK, doesn't look like sw10 is making fsb change so I wonder if it has another purpose such as changing agp/pci ratios for the same fsb's. So unless we figure out the purpose of sw10, I suggest we cut the list in half to only 32 lines or less (if you drop fsb values below 133 as they can...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |