Search results

L
Advice on a backpack for my 17" Apple Powerbook / Dell 9300???

just a little heads up...I found this bag here http://www.ebags.com/burton_snowboards/...product_detail/index.cfm?modelid=50359 I used the ebags.com bag finder, and used an xps1 as reference and this burton bag will fit a 17", and if you look at its measurements in comparison to the Dakine...
- Lance22
- Post #5
- Apr 21, 2005
- Forum: Laptops
L
Advice on a backpack for my 17" Apple Powerbook / Dell 9300???

i also just got a 9300 and want the dakine 101 bag, so i emailed a cs rep from dakine's website about the 101, and heres what they said. "It should work, its maximum capacity would be a 21" So, it helps, but not really? Is there a laptop w/ 21" screen out there?
- Lance22
- Post #3
- Apr 20, 2005
- Forum: Laptops
L
LSI21320 scsi not working with p4c800-e deluxe, help?

I really appriciate your help Peter, ive read some of your other threads, you are a great help...Here is how things ended up... I downloaded the bios and was going to flash my card, and then i got an error when i tried to do so that said it couldn't find my pci bus!? wth? Anyways, by this time...
- Lance22
- Post #9
- Aug 27, 2003
- Forum: Motherboards
L
LSI21320 scsi not working with p4c800-e deluxe, help?

Dohh thats no good, because i think a bios flash might do the trick...When I hop into the cards bios in another computer, It shows irq, and I think normally you can change that, but in the dell bios, its disabled. So I went to lsi logic, and read about the bios, and they give you the option to...
- Lance22
- Post #6
- Aug 27, 2003
- Forum: Motherboards
L
LSI21320 scsi not working with p4c800-e deluxe, help?

Thanks for the ideas, ive tried out all the other slots, and i sent out an email to asus tech support, waiting on that, im going to try the bios now...the only thing holding me back is that it comes from dell...but im assuming that the card architecture is the same, but dell just paid to have...
- Lance22
- Post #4
- Aug 27, 2003
- Forum: Motherboards
L
LSI21320 scsi not working with p4c800-e deluxe, help?

Ive got a 2.8c with a p4c800-e deluxe, and im trying to install an LSI21320 scsi adapter, that works great in other systems, but is not with this board. Ive narrowed it down to a conflict between the LSI and usb. When usb is enabled, no matter how many, I get a message that says "00 USB mass...
- Lance22
- Thread
- Aug 27, 2003
- Replies: 9
- Forum: Motherboards
L
Dell PowerEdge 400SC (ed: 9/4 offering P4 3.2G for $100) w/ P4 2.8 800FSB hyperthread $448 free ship

I alsmost paid for 2nd day shipping too, but oh well..Im just hoping that since it shipped out from dell at 6:45, it will be on a plane between now and tonite, to show up to the local distributer in time to be delivered tomorrow. I ordered a fp from them and once it left dell, it took...
- Lance22
- Post #120
- Aug 21, 2003
- Forum: Hot Deals and Giveaways
L
Dell PowerEdge 400SC (ed: 9/4 offering P4 3.2G for $100) w/ P4 2.8 800FSB hyperthread $448 free ship

mine is right behind yours whiteneymuse, it was shipped out at 6:45 this morning.
- Lance22
- Post #117
- Aug 21, 2003
- Forum: Hot Deals and Giveaways
L
Dell PowerEdge 400SC (ed: 9/4 offering P4 3.2G for $100) w/ P4 2.8 800FSB hyperthread $448 free ship

haha, yah, i went out and bought 1 gig of corsair twinx ddr400 the same day...and its staring me down day after day.
- Lance22
- Post #114
- Aug 21, 2003
- Forum: Hot Deals and Giveaways
L
Dell PowerEdge 400SC (ed: 9/4 offering P4 3.2G for $100) w/ P4 2.8 800FSB hyperthread $448 free ship

Im really glad i got in on this now....Ill be even happier once i can touch my system.. Hopefully dell is just lagging with updating my order status and it shows up soon, like, sometime this week.
- Lance22
- Post #112
- Aug 21, 2003
- Forum: Hot Deals and Giveaways
L
Dell PowerEdge 400SC (ed: 9/4 offering P4 3.2G for $100) w/ P4 2.8 800FSB hyperthread $448 free ship

i ordered mine friday too...it hasen't even gone through production =\ When I first logged in, it said that it would be delivered by this friday, but either tuesday or monday, it was changed to it wont ship till the 22nd with a delivery estimate of the 27-29th.. I wonder if its because its my...
- Lance22
- Post #108
- Aug 20, 2003
- Forum: Hot Deals and Giveaways
L
Dell PowerEdge 400SC (ed: 9/4 offering P4 3.2G for $100) w/ P4 2.8 800FSB hyperthread $448 free ship

Im just wondering if anyone has got their system yet... Mine was delayed, I think. Im also wondering if anyone knows the model of the scsi drive that comes with the scsi system?
- Lance22
- Post #102
- Aug 20, 2003
- Forum: Hot Deals and Giveaways
L
The EPoX 4G4A+ seems very promising.

So true, if I were my cpu, id be long gone by now! Im about to take out my cpu and put some arctic silver on it...hopefully it'll be nice and work for me afterwards, at a lower temp. =]
- Lance22
- Post #329
- Jul 9, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

oh god, thats my mistake....on the site, it says that its applied to the integral heat spreader, the metal cap that covers the cpu core...I was thinking that it didn't want me to put any on the cpu, and only on the heatsink, which i thought was the "integral heat spreader, the metal cap that...
- Lance22
- Post #324
- Jul 9, 2002
- Forum: Motherboards
L
Im having major problems..

My temp is at 59 C when I have a load, and my cpu is clocked at 1.6 with stock voltages... I just cleaned my cpu and heatsink and reapplied artic silver, following the directions at the arctic silver site very close, i didn't apply any to the p4 core, just to the heatsink, and it didn't help at...
- Lance22
- Thread
- Jul 9, 2002
- Replies: 1
- Forum: CPUs and Overclocking
L
The EPoX 4G4A+ seems very promising.

Now my problem is major, My temp is at 59 C when I have a load, and my cpu is clocked at 1.6 with stock voltages... I just cleaned my cpu and heatsink and reapplied artic silver, following the directions at the arctic silver site very close, i didn't apply any to the p4 core, just to the...
- Lance22
- Post #320
- Jul 9, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

I went out and I got a 431w enermax powersupply, but now I am having a problem with heat...when i play WAR3, my temp jumps up to 60C and im only running at 125 fsb, 3:4.. How much artic silver 3 do all of you use on your heatsinks to rub into it? I think that I may not have used enough...
- Lance22
- Post #317
- Jul 8, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

Right now I am running a 144 FSB @ vcore 1.70(165 MBM) and DDR 384 @ vcore 3.00 (2.90 MBM), So far all is well and stable, I passed the Sandra Memory test and am about to press my luck with playing games. My temps are 44 C cpu and 30 C case. Thanks again for the help.
- Lance22
- Post #285
- Jul 4, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

Thanks a lot, i really appriciate the help, I just have a couple more questions.. 1. Can you tell me which temp corresponds to what in MBM? Here are my settings right now...@146 FSB Sensor 1 (19 C set to Winbond 1) Sensor 2 (22 C set to Winbond 2 2N3904) Sensor 3 (30 C set to Winbond 3) Are...
- Lance22
- Post #279
- Jul 4, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

Sorry to confuse you, when i say 4:3, i really mean 4:5 146 FSB is the highest I can get with Vcore @ 1.70 bios(1.65/1.66 MBM) and mem 1:1. Prime95 drops me to inbetween 1.60 - 1.62 at this setting. Can you tell me which temp corresponds to what in MBM? Here are my settings right now...
- Lance22
- Post #268
- Jul 4, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

Right now I am set at 1.675 vcore, and its showing up as 1.63 in MBM, When I was set to 1.70 vcore in bios, i was able to boot to 146fsb @4:3 which gave me DDR 365 @ 2.7v in bios. When I run prime95 with my current settings, my vcore drops to 1.57 / 1.58 / 1.60. The highest ive been able to...
- Lance22
- Post #263
- Jul 3, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

I guess ill just keep trying to work with everything, im trying to attain a 3g memory speed, but i keep getting the feeling that my PS is struggling to power everything. Can you tell me which is better...a low cpu clock with a high memory score, or a high cpu clock with a little bit lower memory...
- Lance22
- Post #254
- Jul 3, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

I have an enermax 350w model EG365P-VE, 32A Max with a Peak of 35A
- Lance22
- Post #251
- Jul 3, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

Hey, yah, that helps out a lot... but i think that i have found the problem...Im looking at my voltages and they seem to not be as consistent as i would have hoped.. 136fsb, 2.17ghz 3:4, DDR 362 2.5-3-3-6 AGP locked Vcore - 1.625 AGP - Stock 1.50 VDimm - 2.70 +3.3 @ 2.62 +5.00 @ 5.00 exactly...
- Lance22
- Post #247
- Jul 3, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

Hey, thanks a lot for the help, i had mbm5 installed, but i uninstalled it because i couldn't figure out what temp corresponded to what, im going to get it again and try to figure it out. Thanks also for the P/S info, im going to monitor my levels and see what works best for me. Right now im at...
- Lance22
- Post #242
- Jul 3, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

U have an antec 300 wat? Im having trouble with my enermax 350!! I think im having voltage problems, because i have to clock up to 1.8v to get into windows at 143 fsb, and when i try going to 144 i crash half of the time. When i boot and it shows temps and everything, usually my cpu voltage and...
- Lance22
- Post #232
- Jul 2, 2002
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

I have been able to boot and get sandra memory scores for the following... This setting was a little unstable, after i ram ss mem test again, it crashed right after it finished, im think i might need to up my mem volt. 142 fsb @ 1.7v 2.27ghz used 3:4 DDR378 @ 2.7v 2.5-3-3-6 Sandra Mem -...
- Lance22
- Post #227
- Jul 2, 2002
- Forum: Motherboards
L
In Dire need of help! 1.6a w/ epox 4g4a prob.

I have been able to boot and get sandra memory scores for the following... 142 fsb @ 1.7v 2.27ghz used 3:4 - This setting was a little unstable, after i ram ss mem test again, it crashed right after it finished, DDR378 @ 2.7v 2.5-3-3-6 im thinking that it...
- Lance22
- Post #5
- Jul 2, 2002
- Forum: CPUs and Overclocking
L
In Dire need of help! 1.6a w/ epox 4g4a prob.

I actually do have my pci/agp locked at 33/66, ill put my agp voltage to zero, raise my cpu volt, and try out those ram settings. Thanks a lot for the help guys, The last cpu i overclocked was my pentium 200 to 233, im pretty new at this, thanks again for helping.
- Lance22
- Post #4
- Jul 2, 2002
- Forum: CPUs and Overclocking
L
The EPoX 4G4A+ seems very promising.

I am having major problems trying to overclock, heres my setup: Enermax 350w ps 1.6a w/ epox 4g4a - stock cooling 512 corsair xms 2700 The highest I have been able to clock is, 135fsb +.5, agp +.25, ram +.25 2.5-3-3-6 Im trying to obtain a stable 2.2 to 2.4 clock, but I am having no luck...
- Lance22
- Post #224
- Jul 2, 2002
- Forum: Motherboards
L
In Dire need of help! 1.6a w/ epox 4g4a prob.

I am having major problems trying to overclock, heres my setup: Enermax 350w ps 1.6a w/ epox 4g4a - stock cooling 512 corsair xms 2700 The highest I have been able to clock is, 135fsb +.5, agp +.25, ram +.25 2.5-3-3-6 Im trying to obtain a stable 2.2 to 2.4 clock, but I am having no luck...
- Lance22
- Thread
- Jul 2, 2002
- Replies: 4
- Forum: CPUs and Overclocking
L
Question reguarding Epox 4g4a and temps

Im just trying to get familiar with something here, I have an Epox 4G4A and I'm running Motherboard monitor 5...I have it setup to display the temps for winbond diode 1 thru 3, im wondering what each temp corresponds to, or how i can setup MBM5, to read the crucial temps that I need to know...
- Lance22
- Thread
- Jul 1, 2002
- Replies: 0
- Forum: Motherboards
L
The EPoX 4G4A+ seems very promising.

I got my 4g4a on wednesday, my cpu and ram should be here any second. =D Im hoping to get a good setup, i got a 4g4a 1.6a and 512 meg corsair xms cas2. Ill probably be posting up a lot in the forums asking for some help with things. And thanks to everyone for the help thus far, i...
- Lance22
- Post #176
- Jun 28, 2002
- Forum: Motherboards
L
ATI HDTV Component Video Adapter $29 from shop@ATI

The support is in the new catalyst drivers that ati released...thats all u need. Also, thanks for the info unsped, i think ill get the dvi one so that i can keep it connected with my monitor as well.
- Lance22
- Post #14
- Jun 26, 2002
- Forum: Hot Deals and Giveaways
L
ATI HDTV Component Video Adapter $29 from shop@ATI

Do you have any idea if one would be better than the other? dvi or vga? If the quality and clarity is the same, then ill just get the vga one...but i have a feeling that the dvi connector would have better output?
- Lance22
- Post #12
- Jun 26, 2002
- Forum: Hot Deals and Giveaways
L
ATI HDTV Component Video Adapter $29 from shop@ATI

It says that the dvi to component wont work with all radeons, only the AIW's...any idea if this is true? false? Is the quality the same for the both? I have a 32" panasonic tau hdtv right next to my computer and i just ordered the $98 radeon from new egg...im wondering which adapter i should...
- Lance22
- Post #10
- Jun 26, 2002
- Forum: Hot Deals and Giveaways
L
HOT! Microsoft Optical Mouse $12.99 - $10 rebate = $2.99 at So CAL Frys

any idea what the scan rate is?
- Lance22
- Post #4
- Jun 26, 2002
- Forum: Hot Deals and Giveaways
L
SGI remanufactored Alpha Computers ( weekly special )

I used to work at SGI, they're hurting for $$, probably why they're trying to sell off lots of systems?
- Lance22
- Post #6
- Jun 26, 2002
- Forum: Hot Deals and Giveaways
L
What's the best price/performance Radeon 8500?

Well, the difference is that, the $98 one has faster ram, and can clock higher. The $99 one on the other hand you can't clock as high, it doesn't come clocked as high to begin with, but it supports dual display. The difference between 64megs and 128 megs is mainly that you have more memory to...
- Lance22
- Post #6
- Jun 26, 2002
- Forum: Computer Building
L
Hard Drive won't defragment...

I heard that it is better to run defrag in safemode, no drivers or anything loaded, just good ole defragging! You can give that a try.
- Lance22
- Post #9
- Jun 26, 2002
- Forum: Computer Building

RESOURCES

Top Bottom