"I installed Win XP, then the chipset inf file, then I tried the intel application accelerator raid edition, but it could not detect it."
I had this problem with my IC7-G 2 version. I noted that if I did not have the BIOS set to RAID in the intel chipset Raid, that the OS would detect that it...
This week I was at a computer show and noted that the ASUS NB coolers looked that would fit (clip right on) on the Abit Board IC7. The ASUS NB coolers are larger that ABIT's and do not use a fan. Just wondering if anyone has tried it and if it would fit with a Z-7000 CPU cooler on a ABIT IC7-G...
Ramses:
Any chance that the NB fan would not be needed with the new heatsink if you are using a Zalman CPU cooler? The Zalman seems to put a fair brease around the NB anyway. I only do minor overclocking, I suppect for large overclockers it would be an issue. By the by does the new setup...
Just put a IC7-G system together. What a dream. Built several systems for wife and others and it was my turn now. I ungraded from a Win-95 system to this 2.8 P4 system with Win XP-pro. I have been following the thread and it has helped me a great deal. I am running the system off a parallel...
IC7-G Sound drivers and Apps from Abit.
Hi All:
I think this is a silly question but I have not been able to find the answer. There are 2 software downloads for the sound on the IC7-G Board. 1) WDM-a345.exe which seems to be drivers only and ap_a345.exe which seems to be the realtek media...
Just Got my IC7-G from NewEgg last night. It had rubber bands around the ram clips and all seemed well. I did note 2 things that made me a little curious. The Box was not sealed in plastic and the plastic around the Board was not sealed. I also noted the wire leads for the chip set cooler...
I had a 2.26 P4 that never worked. After looking at it I found one of the pins was shouter that the other pins, which I suppect was not long enough to make contact. I was able to RMA it directly back to Intel, no problem.
Gary
Let us know how the Swiftech works out.
Also from other posts, why 4 ram sticks the same ram for dual mode. Why not 2 pairs the same? I understand this board also supports reg. ram which I am thinking of goint to on this box.
Gary
Thanks
Yea I slip Streamed sp1 on a new install disk before I installed the OS. 137 Gigs not Megs :) . I also saw this morning that the Intel® Application Accelerator gives support for large drives. Thanks for your kind response.
Gary
I am looking at getting one of the Motherboards with a promise ATA 133 raid chips on board. I thought that all I needed to do was hook up a hard drive, over 133 Meg, in my case 200Meg. But this reference (see below) on the Microsoft page about XP seems to say different. Has anybody done this...
Thanks for the reply. Have always used Abit, like the more features of the highpoint Raid. GB users group always seemed to be less than Abit or Asus, but I like this GB board. I have built machines for my Mom and mother of late and I am using a old machine. Just can not wait for summer for...
About a month ago I heard that ABIT was going to have a board also. But I have not heard anything about it of late. Anybody heard if ABIT was going to have a board?
Gary
On the new ASUS GB Board it has the below ATA ports.
-2 x Serial ATA Ports(Deluxe Edition)
Does this mean that the Promise controler only supports 2 serial drives OR that each port supports 2 serial drives for a total of 4 seral drives? If the later is true I guess you could get 2 normal...
Thanks Jfano for the lead on the panaflo 1900 RPM fans. Two questions do the panaflo's have speed sensor leads on them? I have seen some comments that saw they do not. Also any leads on cheep 2500 RPM panaflo fans. I am using a few fans with the antec true power fan connectors that slow down...
Hi All:
I am wondering if the new GB Boards will be able to support the upcoming Prescott .09 micron P4 with it's lower (or so I have read) voltage requirements.
Gary
Hi All:
Quick question: Just put a BD7II-Raid system together. On power up every thing seems to power up but no video. Fans run and the master hard drive seems to be seeking. Tried disconnection the 2 drives, floppy and CDRW. No change. Reseated ram and ATI 8500DV video board, no change...
Joker: Many thanks for your reply. I plan on using a 2.26 P4 with the 133 buss. I note that most of the serious overclocker are using somewhere around the 1.8 P4 which is normally a 100 fsb. I am wondering if someone can confirm that the 3/4 memory ratio on the BD7II (845E chipset) will be...
I have been following this tread with great interest. But I guess I am a little slow. I think the BG7 have the 3/4 and the 4/5 mem. settings at 133 and above. I also gather the BD7II only has the 3/4 mem. setting at 133 and above. Rather supprised to find they have anything above 1/1 at or...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.