Search results

  1. G

    Whats the difference between metrosexual and emo?

    emo = cute little red puppet that likes to be tickled. metro = guy who likes to dress well. ...err yeah.
  2. G

    Where do you purchase gasoline

    Where ever's cheapest. Unless it looks like I'll get robbed while gassing up there.
  3. G

    Hello

    =) I just made that all up. Like I said, he's a close friend from highschool. It was just a joke, and I'm sure if he has read that, he'll laugh. And I'm ready for the beating he'll give me the next time we meet in person. BRING IT ON!!
  4. G

    Hello

    =) I'm the 'digerati' he talks of. I built his (... er her ... I'll explain later) shuttle box. Was quite an experience. His/Her old system was a p3 800 or so, with a voodoo3 3000. Felt quite good seeing someone go from that (Halflife was almost playable on the old p2 300, then much better on...
  5. G

    Hello

    great. another newb. this place is going down the drain. (j/k, i know this guy, close friend from highschool. what a dork)
  6. G

    Choice of Hard drive. Which to get?

    When it comes to warranty, reliability, performance, and mostly noise which of these is better? (Drive size is irrelevant, so just because one is 160gb doesnt mean I want it over the other) Maxtor 160gb 8mb cache FDB (Fluid Dynamic Bearing) motor Western Digital 120gb 8mb cache "Special...
  7. G

    Are Enlight Power Supplies Loud?

    Very Quiet. I have 2. Love 'em.
  8. G

    Thinking about getting Shuttle, any tips?

    Forgot to mention, I'm running mine at 215mhz rock stable. I dont wanna go higher because I dont think my ram can handle it. Its got good overclocking options too.
  9. G

    Thinking about getting Shuttle, any tips?

    Shuttle makes a ton of boards. They also make SFFs. So you'll have to pick a chipset first. I have an AN35N Ultra, (nF2 U400), and absolutely love it. It has no bells and whistles (sata,mcpt,firewire, etc), but I never needed that anyway. They make good boards. Look for one you like, and go for it.
  10. G

    How hot does nForce2 Ultra 400 northbridge get?

    Thats the thing. Its not even "hot". Its mildly warm. Like touching my desk (made of wood) in my room where the temp on the air conditioner is 70 degrees farenheit. Which is what makes me worry that the nb is silently burning up, while the nb heatsink is not making contact and giving me the...
  11. G

    How hot does nForce2 Ultra 400 northbridge get?

    I have a Shuttle AN35N (nF2 Ultra 400) in single channel mode. I recently figured out that the NB doesn't make full contact with heatsink. Its passive cooled. I ran prime95 for 45 minutes, and the nb heatsink was just warm to touch. Right now the system is running at 9x213mhz. I want to try...
  12. G

    Program to figure out wth SBLive drivers are doing?

    The registry has some settings for the sound card, and the only files it refers to are in the 'creative' directory under program files. But that just adds up to 33mb. I still wanna know where the other 67mb is.
  13. G

    Program to figure out wth SBLive drivers are doing?

    If I install my SBLive drivers (just drivers, nothing else in XP system and 2k), a 100mb increase can be seen in the C partition. Sure enough, uninstall and its gone. I want to know what files are put into windows, and how an install program thats 30mb can create 100mb of stuff. Anybody know a...
  14. G

    Just got new SBLive XGamer card. Now what?

    Here's the 'cleaned up' version of the mod. (This is what I did): http://www.tech-pc.co.uk/audigy-1.php Here's a LONG discussion by people who tried it, and various ways to do it, and errors people get and everything else including the kitchen sink...
  15. G

    Just got new SBLive XGamer card. Now what?

    Yep, onboard sound has been disabled. Plus I did some searching, and found a page that talked about modding the Audigy 2 drivers and installing it on Audigy1 and SBLive cards. I did it, and it works like a charm. Plus, the sound quality compared to regular SBLive drivers is a lot better...
  16. G

    Just got new SBLive XGamer card. Now what?

    I recently got my hands on a used SBLive XGamer card. Since I was using onboard sound, I put the SBLive in my system. Downloaded Creative's latest driver, and checked device manager and it says "Live Value". I know the card is an XGamer, it has CT4760 written on it in 2 places, and has the gold...
  17. G

    what are you allergic to?

    shrimp. of all things. shrimp. i could eat as much as i wanted. then one day i ate some and i had an allergic reaction. stupid red lobster. since then i can't eat shrimp. =(
  18. G

    I have really had it with this.

    Problem has been solved. The issue was with the bios. I flashed the board with an older bios, and now I can change multipliers. The wire mod is still there. I'm running at 9.5x200 now. The bios I had (latest one) probably had issues with multipliers below 11. The older one runs perfectly. I...
  19. G

    I have really had it with this.

    For 8 months I ran my Athlon XP 1800+ (tbredb) on a SiS motherboard at stock speed because the bios didn't allow for overclocking. Then three weeks back I bought an nForce2 board because everyone has nothing but good things to say about it. I spent 70$ on the Shuttle AN35N-Ultra and 100$ on...
  20. G

    Does nForce2 have known issues with USB ?

    Ever since I upgraded to my nForce2 mb (from my SiS735), the usb mouse has become very laggy. The motion is no longer smooth, it 'hops' around when moved. I did a search on google, and a ton of german websites come up for "nforce2 usb problem", and they all talk about ehci and ohci usb...
  21. G

    Enlight EN 7250 Case front USB pin assignments?

    Well, this makes it even more confusing. This is what the wires from the case look like: 1 pin connector - BLACK, labeled 'ground' 1 pin connector, also BLACK, labeled 'ground' (the above are the ground for 1 usb slot each. no problem there) 3 pin connector - GREEN,WHITE,BROWN (in that order...
  22. G

    Enlight EN 7250 Case front USB pin assignments?

    I'm sorry if I didnt explain correctly. The headers on the motherboard are marked clearly, thats not the problem. The problem is that the cable that is attached to the case's usb slot isn't labeled. So even though I know which pin on the motherboard is VCC, D+ and D-, I don't know which color...
  23. G

    Enlight EN 7250 Case front USB pin assignments?

    Hey guys, I just got my new Enlight 7250 case, and it has 2x front usb slots. It has a cable coming from there that should be plugged into the motherboard headers. But the pins arn't labeled. There's a 3pin and a 1pin per usb slot, and the 1pin is labeled as "ground". But the 3pin isn't...
  24. G

    new NF2 mb recommendations

    MCP-T will give you Dolby sound. MCP just gives your 'ordinary' 6 channel sound. As for the motherboard, I say go with Asus or DFI. I have a Shuttle AN35N Ultra (also nF2 400 Ultra), but it has no fancy features. But I dont need them anyway. Love my mb.
  25. G

    This good enough for Ti 4200 cooling? (PIC)

    Thanks for the suggestion. I'll do just that.
  26. G

    This good enough for Ti 4200 cooling? (PIC)

    The fan on my PNY Geforce4 Ti4200 is dying. It's rattling so badly that I can hardly stand it. I looked around for a replacement fan, and the cheapest is the Vantec Iceberq (size 40mmx40mm)for 15$ + shipping from svc. But I also found this chipset heatsink thats about the same size (37mmx37mm)...
  27. G

    ##POLL## Gamers Sound Cards.

    Had a Gamesurround Fortissimo II (little brother of the Turtlebeach Santa Cruz). Thought it was very nice. Until I got a Live 5.1 X-Gamer. Holy crap. The high quality sound in the games I play (UT2k3, Q3) actually work now! EAX is nice and dandy. Not saying TBSC or its brethren are bad, but when...
  28. G

    nForce2 upgrade woes

    Its not just online play. Even single player does that. And there's no weird hard drive or any other activity. The only USB device I have attached is my mouse. But poppyq has a very good point. When I had it set to 175fps max, the problem did mostly go away. It's playable again, but I'd still...
  29. G

    nForce2 upgrade woes

    Thanks for the ideas. Will try older nForce2 drivers. Quake 3 is patched to the latest version (same as it was on my old system). I tried with and without nForce2 drivers as well. Maybe an older version of nForce2 will work. I'll let you know how it goes. By the way, what kind of packaging...
  30. G

    nForce2 upgrade woes

    Previous system: Athlon XP 1800+ TbredB @stock ECS K7S5A Pro 512MB PC133 SDRAM @stock Upgraded to: Athlon XP 1800+ TbredB @ 1925mhz (11x175) (same chip) Shuttle AN35N Ultra (nF2 400 Ultra) 512MB HyperX PC3200 2-3-3-7 (haven't tried 2-3-2-6 yet) Items carried over: Enlight 360W PS SB Live 5.1...
  31. G

    nForce2 unlocks tbred cpu without hardware mod?

    Which leaves me here: Currently I'm running 11x175 = 1925mhz (@1.65v). Ram is still not being used fully, since its pc3200 c2. I would really like 9.5x200 = 1900mhz, or say a little higher, perhaps 9.5x205 = 1948. But I guess my only recourse is to get a conductive pen and unlock the cpu by...
  32. G

    nForce2 unlocks tbred cpu without hardware mod?

    Well, now I'm really confused. The cpu works correctly if I set the multiplier to 11. But anything other than that (9.x, 10.x, etc) is just ignored. I tried 9.5, 10, and 10.5. None of those work. If I set it to 11, it works. If I set it to AUTO, it still works (as 11.5). If I put anything else...
  33. G

    nForce2 unlocks tbred cpu without hardware mod?

    Its not the physically locked type (like the newer bartons). Its an old tbred-b. Anyway, I got the latest bios for the mb, and it seemed to change the multiplier from 11.5 to 11 earlier. I haven't tried experimenting further. But since it did change it, I guess I can set it to 10 and continue on...
  34. G

    nForce2 unlocks tbred cpu without hardware mod?

    I just bought a Shuttle AN35N-Ultra (nForce2 400 Ultra chipset), and want to run my 1800+ tbred-b at a 200mhz fsb. But changing the multiplier in the BIOS doesn't seem to affect the cpu, it always shows 11.5 (original multiplier). I've heard that nForce2 motherboards are capable of unlocking...
  35. G

    [DEAD] Dell SB - Dimension 4600 2.4/256/40/48xCD for $139+tax AR ($100 rebate)

    deck the halls with hyper threading..... got me one with a 9800 =) , can't wait to get it and chuck my stupid ti4200 away...
  36. G

    Any such thing as a Dual P4 motherboard?

    Maybe I can talk him into a dual amd...
  37. G

    Any such thing as a Dual P4 motherboard?

    thanks
  38. G

    Any such thing as a Dual P4 motherboard?

    A friend of mine wants to up grade to a dual p4 motherboard. I dont ever remember hearing of any such thing? Is there a dual p4 mobo? And where can I get it?
  39. G

    roommates roommate RENT issues

    Agree with you. Unless those two live in JUST her room, and not interfere with you and not use your equipment and the bathroom (I'm guessing they'll be sharing the bathroom with you). Tell them that if they use any electricity/heat/water then they will have to chip in 1/3 of the amount. Same...
  40. G

    HyperThreading, how can I install Windows 2000 and use it?

    I dont think w2k supports hyperthreading. Hell, my w2k sp4 cd wont even support 48bit lba, which microsoft *says* it does.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |