Search results

C
SERIOUS PROBLEM WITH CLEAN INSTALL OF WINDOWS 2000 PRO

I have a second Rig with 3 partitions part 1 w98se part 2 win 2k pro part 3 wxp pro and in all of them, I've Partition Magic already installed, what if I hook up the 80 gb drive to this Rig and format part 1 with 30 gb and install w2k pro, and a 50 gb partition and in it install wxp pro...
- chack
- Post #3
- Feb 15, 2004
- Forum: Operating Systems
C
SERIOUS PROBLEM WITH CLEAN INSTALL OF WINDOWS 2000 PRO

I have two questions in this post. first I don't know how to install it with a fat 32 format, the second is my 80 GB drive show (when using w98 boot disk in fdisk) as a 10 GB maximum capacity drive........ I don't know what's wrong fdisk won't let me to increase the size of the primary...
- chack
- Thread
- Feb 15, 2004
- Replies: 2
- Forum: Operating Systems
C
how to copy game cd's with ECDC or Nero....

the other day I bought mech warrior game and it has 2 cd's , one for installing the game and the other for playing it. I wanted to make a copy of both cd's , with ECD creator 6 , and all went well with the cd 1 ( the install cd) I was able to burn it , but the cd 2 ( the playing cd) is a...
- chack
- Thread
- Oct 25, 2003
- Replies: 2
- Forum: Windows
C
A7N8X de luxe VOICE SET UP (HOW)

My USB harman\kardon sound speakers are connected, but I've " heard 4 rumors, #1 that this board have on board tiny special speaker just for boot on voice, #2 that voice won't work with USB speakers, #3 that I have to connect only a a non USB speaker to the analog sound jack for it to work, #4...
- chack
- Post #3
- Jun 27, 2003
- Forum: Motherboards
C
A7N8X de luxe VOICE SET UP (HOW)

How does one enable voice on boot for the A7N8X DE LUXE ( bios rev 1003), when the rig boot up, you know the computer tells the state of the boot via speech, it is enabled in BIOS but voice won't kick in at boot up still, what do I have to do to get this feature going .. AND !! yes the voice...
- chack
- Thread
- Jun 27, 2003
- Replies: 2
- Forum: Motherboards
C
NEED IDEAS FOR UPGRADE....

I have a good old ATX Matsonic MS7112s Pentium III 500 MHz, rig running like a tuned clock( a bit slow tho ) with a 256 MB ram, (I'll upgrade later) 250 PSU (later I'll apgrade it to a 350) a 60 GB wd 7200 hdd, +a 9 GB 5400 Maxtor, a 32 megs ATI graphic, (I'll upgrade to 64 mb later) Sony CD...
- chack
- Thread
- Jun 25, 2003
- Replies: 0
- Forum: Motherboards
C
SONY CRX 220-1\ 52 24 52\ NERO - ROXIO ECD CREATOR 5X PLATINUM

bacilus this is a off topic question , why? Why not, it's 'cause I like Roxio guy! Beside ECD platinum have a feature that Nero doesn't have, and that is: the Utility to" format " a CD-R to be used in a drag and drop mode, and CD-R cost almost 0\free, where CD-RW cost a lot, and that is what...
- chack
- Post #3
- Jun 16, 2003
- Forum: Peripherals & Components
C
SONY CRX 220-1\ 52 24 52\ NERO - ROXIO ECD CREATOR 5X PLATINUM

I bought the Sony 220e-1 52-24-52 writer from newegg.com and it came with the Nero software, now here is my problem\story: before buying this cd-rom I double checked with Roxio for supported drives for the Roxio ecd creator Platinum 5x, (which I own with all the already downloaded updates for...
- chack
- Thread
- Jun 15, 2003
- Replies: 2
- Forum: Peripherals & Components
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

Selfbuilt thanks for the info (your comments lowered my heart rate a bit), and rest assured that I won't OC this board until I'm informed on how to do it correctly, (and if possible !) this is a whole new field of knowing I've been surfing the web for hours on end , downloading\copying...
- chack
- Post #18
- May 27, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

just to let you know more about this MB The board cpu pins are set to 1-2 default, the mb version is 2.0, the bios is : revision 1003 dated 3\19\03 I have it reset the external frequency multiplier from (100mhz which was set to default) to 166mhz now, and At boot is showing at 166mhz, instead...
- chack
- Post #15
- May 26, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

Here are some BIOS issue that I'm not sure of what to do. I've "explored" the BIOS thoroughly and I've found this might need attention.... In Advanced Chipset Feature CPU external freq.(mhz) [100mhz] FSB Spread Sprctrum [0.50%] AGP. Spread spectrum [disabled] CPU VCore Setting[auto] Graphics...
- chack
- Post #14
- May 23, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

The hdd activity light connection cable issue, is not resolved still, I've tried reversing and re- reversing the cable polarity, but still the light doesn't came on, but beside this issue, there is the cd r-rw, and dvd rom, that started not reading my installations disks , (both were ok in the...
- chack
- Post #13
- May 20, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

URGENT help needed, I've got everything mounted and connected, but I'm a bit confuse, by the power panel ( the bottom left of the MB,) as you know the power panel connect the case front panel on and off switches and status lights, What I need to know, is the white or color\blue\orange\green...
- chack
- Post #11
- May 14, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

Beautiful, thanks squidman
- chack
- Post #10
- May 13, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

In this issue I need to know this : The MB came with a packet of screws intended for mounting the board, the packet contain 3 individual items, the brass fitting that screws into the case, then the screws that screw the MB to the case, and into the brass fittings, and plastic washers, the...
- chack
- Post #7
- May 13, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

I've got it , thank you all!..:sun: :)
- chack
- Post #6
- May 13, 2003
- Forum: Motherboards
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

Thank you Andy Hui . After I install the processor & heatsink and the ram on the board do I mount the board first, and then the UPS, or I do the UPS first and the board, the hdd, cd-rom etc.etc after, what I'm asking here, is the proper sequence of installing the hardware in the case. And...
- chack
- Post #3
- May 12, 2003
- Forum: Motherboards
C
CPU heatsink pre installation Question

I've bought a AMD processor with a heatsink included, in the package at the bottom side of the heatsink, there is a little plastic like pad, do I remove it, and use thermal paste only, or put the thermal paste on top of it, or none of the above and install the heatsink the way the manufacturer...
- chack
- Thread
- May 11, 2003
- Replies: 9
- Forum: CPUs and Overclocking
C
MY NEW RIG WITH A : A7N8X DELUXE WHAT DO I NEED TO KNOW

I bought the ASUS: A7N8X DELUXE MB The graphic card is: Sapphire ATI RADEON 9500 128MB DDR Specifications: Chipset: ATI RADEON 9500 Memory:128MB 128-bit DDR memory Supports the new AGP 8X standard (2.0 GB/sec) Unique VIDEOSHADER? engine uses programmable pixel shaders ATI's latest...
- chack
- Thread
- May 11, 2003
- Replies: 17
- Forum: Motherboards
C
BUILDING A NEW PC need help

Compudog your suggestions clear the air a lot , I've follow your leads, but I couldn't find the Barton at newegg.com or I just missed it, any LEADS on this? PS: already got the ram at corsair site, but I still need a quiet power supply of 420 w, thanks cheers !
- chack
- Post #6
- May 4, 2003
- Forum: Motherboards
C
BUILDING A NEW PC need help

I'm fine about the Corsair 2 sticks but what about the processor, what kind, athelon duron xp thoroughbred, and what spec, and approx what will it cost , thanks :D
- chack
- Post #4
- May 3, 2003
- Forum: Motherboards
C
*** Official ASUS A7N8X/Deluxe (nForce2) Thread ***

I'm new on this forum and I've just posted about this type of mobo the ASUS A7N8X deluxe, as a general question instead here! I'm surprised that a Anand Tech is mobo specific ! What a great idea. I'll "explore" this forums in more detail. Cheers... :)
- chack
- Post #373
- May 3, 2003
- Forum: Motherboards
C
BUILDING A NEW PC need help

Here is what I intend to buy:The Asus Motherboard for AMD Athlon/XP/Duron Processors, Model# A7N8X Deluxe: Socket A AMD Athlon/XP/Duron (support AMD XP3000 "Barton") Chipset: NVIDIA nForce2 SPP, nForce2 MCP-T FSB: 333/266MHz IDE: 2 x ATA133 RAM: 3x 184-pin DIMM Sockets (PC3200/PC2700/PC2100...
- chack
- Thread
- May 3, 2003
- Replies: 7
- Forum: Motherboards
C
w2k\pro--IE WILL NOT OPEN WEB PAGES

Here is what's happening:When I connect to the web with my dial up, and then I try to open IE\6 it won't open any web pages, not even the MS updates page, and this is what I usually do to open a webpage, just after I'm connected to the web, I've a folder with my frequently used short cuts\...
- chack
- Thread
- Apr 25, 2003
- Replies: 2
- Forum: Operating Systems
C
greetings

how that avatar got in there :D
- chack
- Post #3
- Jan 16, 2003
- Forum: Operating Systems
C
added second Hdd and now I can't boot\reboot to windows

I've a HP pavilion 8275 with win Me, 300mgz and the Hdd is a quantum bigfoot tx 9gb 5400.jumped as a master and it was running just fine , until I installed a second Hdd a WD caviar 5gb 5400 jumped as a slave. ( I've taken this drive from a pc that was too old but working with w98se) So after...
- chack
- Thread
- Jan 16, 2003
- Replies: 1
- Forum: Operating Systems
C
greetings

Hello I've never posted here but I like the set up and the answers to the posts
- chack
- Thread
- Jan 16, 2003
- Replies: 4
- Forum: Operating Systems

RESOURCES

Top Bottom