Search results

H
HOW DO I UNLOCK THE MULTIPLIER?

thanks a lot Jay Bee... 7 bucks is very affordable... i have some epoxy at home though that 5 min expoxy kind... the one with 2 tubes attached to each other that you mix to activate... i read somewhere that that works too... (for the nonconductive stuff to fill in the gap) do you know if it'll...
- h0tai
- Post #4
- Jul 22, 2002
- Forum: CPUs and Overclocking
H
HOW DO I UNLOCK THE MULTIPLIER?

for those of you who unlocked the multiplier in the XP, where can i find a cheap silver conductive paste that the guides say i need? i saw one site that had it for 22 bucks.. thats a lot of money... anyone got any suggestions as to where i can find this silver laquer???? THANKS.
- h0tai
- Thread
- Jul 21, 2002
- Replies: 4
- Forum: CPUs and Overclocking
H
The best GeForce 4 Ti 4200 128Mb

To those who think that the Chaintech GT21 special edition is the best..... is there any difference between the GT21, and the chaintech GT20 (with 128 megs of ram) other than the VIVO function?
- h0tai
- Post #18
- Jul 13, 2002
- Forum: Graphics Cards
H
where do i get cheap panflos?

everyones talking about the 80mm panflos.. where do i get them for CHEAP?
- h0tai
- Thread
- Jul 11, 2002
- Replies: 3
- Forum: Cases & Cooling
H
HSF blowing in or out?

haha, i would try it both ways, but the alpha+delta combo is just so much of a pain to mount and unmount, but thanks for the advice.
- h0tai
- Post #6
- Jul 10, 2002
- Forum: Cases & Cooling
H
HSF blowing in or out?

thanks for the advice, my fan blows extremely loud btw, i am planning on adding a switch to the fan so that i can apply either 12V or 5V, cos i can't imagine what it would be like to have my computer in my apt room next year.. (when school starts again).
- h0tai
- Post #3
- Jul 10, 2002
- Forum: Cases & Cooling
H
HSF blowing in or out?

i have an alpha pal 8045 and a 68CFM Delta, and i was wondering if it would be better to towards the heat sink or away? i have it currently blowing into the heat sink, cos i think it makes more sense that way... but i could use some advice...
- h0tai
- Thread
- Jul 10, 2002
- Replies: 7
- Forum: Cases & Cooling
H
2x256megs or 1x512megs of RAM?

does having 2x256 megs of PC2700 ram have any benifit over 1 stick of 512 PC2700??...
- h0tai
- Post #3
- Jul 9, 2002
- Forum: Motherboards
H
2x256megs or 1x512megs of RAM?

i got a question, why does everyone have 2 sticks of 256 megs of ram as opposed to just one stick of 512 megs of ram? does it lead to better performance or what? i am planning on getting PC2700 ram and i want 512 megs.. what should i dO?
- h0tai
- Thread
- Jul 9, 2002
- Replies: 6
- Forum: Motherboards
H
Chaintech TI 4200

i am thinkin of buying a chaintech ti4200 128mb GeF4. anyone have any problems with it? hurry, so i can stop taking this in and out of my shopping cart at newegg.com!
- h0tai
- Thread
- Jul 7, 2002
- Replies: 5
- Forum: Graphics Cards
H
kt333 mobo poll

what exactly are the problems with the ga7vrxp boards? i have one in my comp... i've been having minor blips here and there.. i've been wondering if its motherboard related or what?
- h0tai
- Post #13
- Jul 6, 2002
- Forum: Motherboards
H
Strange problem powering down my A7V333... Need Help.

Does your power supply have a switch where you can manually turn off? if not, check in the bios under power management or what not... and change the soft-off to Memory.. if its available. i had the same problem with the gigabyte 7vrxp...
- h0tai
- Post #2
- Jul 6, 2002
- Forum: CPUs and Overclocking
H
whats the normal xp2000 idle temperature?

i have a an xp 2000+ gigabyte ga7vrxp, i have everything set to the default settings, and the temperature reading for the chip (in bios) is 47 degrees idle. i have an alpha pal 8045 installed with a 68 cfm fan, and i used ASII, with the side pannel open. i've heard about the asus motherboards...
- h0tai
- Thread
- Jul 5, 2002
- Replies: 1
- Forum: Cases & Cooling
H
my ram won't go 333mhz on my kt333 board.

I have a gigabyte ga-7vrxp motherboard and one stick of 512meg ddr2700 ram, and even when i set it to go 333mhz in the bios, the ram always stays in sync with the FSB, i've tried varying bios settings, latency speeds, updating the bios, but its always in sync with the FSB, even when i set the...
- h0tai
- Thread
- Jun 19, 2002
- Replies: 2
- Forum: Computer Building

RESOURCES

Top Bottom