Search results

  1. S

    Strategy for Measuring L1/L2 Cache Size

    I'm just curious how to measure the size of L1 and L2 cache with simple benchmarks (something that I can do in C would be best).
  2. S

    Recovery Data from a Protected NTFS Folder in a corrupt Windows install

    yes I think it was. How do I take ownership?
  3. S

    Recovery Data from a Protected NTFS Folder in a corrupt Windows install

    I have a hard drive that has Windows XP installed but cannot boot at all. I only need some files in the C:\documents and settings\user\desktop. I installed Windows on a second hard drive but that Windows will not let me access the folder I need (says access denied). Also, I tried to do a repair...
  4. S

    Rare(?) Problem with Power Supply and Motherboard

    I can't really touch the pin because of the big white plastic female connector its in.
  5. S

    Rare(?) Problem with Power Supply and Motherboard

    The Power Supply is about 1 year old, and the motherboard is about 6 months old. It seems that the pin on the ATX connector of the motherboard is quite secure. Do you think it would help if I "tin" the atx connector with a thin layer of solder?
  6. S

    IS7 + Enlight 420W Power Supply = Problem with 3.3V Rail?

    The pinout of the 20-pin connector indicates that the burnt pin was the 3.3v. (The bottom left pin, if you look at the IS7 horizontally with the ATX connector closest to you.) I can't RMA because the northbridge of the board fell off some time ago and I fixed a new northbridge heatsink on it...
  7. S

    IS7 + Enlight 420W Power Supply = Problem with 3.3V Rail?

    'm currently using an Abit IS7 motherboard with an Enlight 420W power supply. Recently, the 3.3V rail dropped significantly to ~3.10-3.20 (was 3.30-3.35 a couple of months ago) and I noticed that the 3.3V pin on the ATX connector of both the power supply and the motherboard seems to be burnt...
  8. S

    Quietest P4 Cooling heatsink/fan?

    Just run the Zalman at 5V, it is quiet and can still cool better than the stock heatsink.
  9. S

    Rare(?) Problem with Power Supply and Motherboard

    I'm currently using an Abit IS7 motherboard with an Enlight 420W power supply. Recently, the 3.3V rail dropped significantly to ~3.10-3.20 (was 3.30-3.35 a couple of months ago) and I noticed that the 3.3V pin on the ATX connector of both the power supply and the motherboard seems to be burnt...
  10. S

    BF1942 isnt recognizing my MX500 mousewheel?

    logitech mice work best without mouseware :)
  11. S

    Notebook with dual monitor support?

    Is there any way for a notebook to output to two LCDs (one LCD from the notebook, and one external)? Are there any notebooks with dual monitor support?
  12. S

    Abit IS7 doesn't like Corsair TwinX PC3200LL?

    Yeah, I just don't understand why the motherboard won't do high FSB with the Corsair TwinX. I mean the ram can do 200mhz (at FSB250, ratio 5:4), but it can't do 181 (at FSB272, ratio 3:2). I have tried single stick of Kingston ValueRam and single stick of OCZ PC3500, both sticks had no...
  13. S

    Abit IS7 doesn't like Corsair TwinX PC3200LL?

    Is there nothing else I could try?
  14. S

    Abit IS7 doesn't like Corsair TwinX PC3200LL?

    I tried up to 2.65. Do I really need to up the vdim that high? edit: 2.8 still doesn't work, when I go 260+ fsb with the corsair, the computer refuses to post. It just gives a long beep. (I tried 3:2 and 5:4. Tried lowering memory timings, GAT settings, everything :() I'm concerned that the...
  15. S

    Abit IS7 doesn't like Corsair TwinX PC3200LL?

    I have a 2.4C and an Abit IS7 board. With an OCZ PC3500 basic edition ram, I can do FSB 272, with memory ratio of 3:2. So the memory is at 181 mhz. However, with a single or double stick of Corsair TwinX 3200LL ram, I cannot run at that setting, even though the memory speed is still well below...
  16. S

    Help with overclocking 2.4C (won't even do 2.88 ghz)

    yes and yes :( I'm thinking its the power supply.
  17. S

    2500+ is better Value then the 2.4C.. do you agree?

    A 2.4C may cost twice as much as a 2500+, but a 2.4C complete system doesn't cost twice as much as a 2500+ system.
  18. S

    Help with overclocking 2.4C (won't even do 2.88 ghz)

    Hi, a friend of mine has the following setup: Abit IS7 Pentium IV 2.4C Geil PC3500 1GB (dual kit) Xaser III Case and Thermaltake 420W Power Supply Thermalright SLK900U and Panaflo 92mm Maxtor 160GB Hard Drive Western Digital 10GB Hard Drive LG CD-RW Samsung DVD He cannot reach 2.88 Ghz with...
  19. S

    Help! Disappointing results with 2.4C and IS7

    Another thing, what kind of readings are you guys getting on the 12V rail? The power supply used was a Sparkle 400W, and the mobo readings are around 11.56-11.62v.
  20. S

    Help! Disappointing results with 2.4C and IS7

    Well, I don't want to raise the voltage with the stock intel heatsink. So 2.9 ghz at default vcore (1.46-1.49 actual) is not abnormal? Is it realistic to expect 3.2+ghz with better cooling and slightly raised vcore?
  21. S

    Help! Disappointing results with 2.4C and IS7

    N/B strap is set to FSB800, FSB:MEM is set to 3:2
  22. S

    Help! Disappointing results with 2.4C and IS7

    Hi, I am having some trouble getting over the 3.0 Ghz mark with the 2.4C cpu and IS7. The current setup is: Abit IS7 Pentium 4 2.4C Mushkin 1GB DualDDR Ram Intel Stock Heatsink Right now, the top speed it runs at seems to be ~2.9 Ghz at default vcore. I haven't messed with the BIOS settings...
  23. S

    Arctic Silver 3 or Arctic Silver Ceramique

    From my experience, Ceramique's advantages (vs ASIII): 1) slightly easier to apply (its thicker). 2) pure electrical insulator (in case you accidentally get some of it on the mobo or something). 3) very cheap in 22 gram tube. 4) performance maybe a tab better. All in all, buy Ceramique if you...
  24. S

    2.4B vs 2.4C on a BH7

    If you have no plans of upgrading the mobo, then it'd be wiser to get the 2.4B since you would be able to overclock it. The BH7 can handle FSB of 200, but not much higher.
  25. S

    Anyone beat a 115% o/c :-)

    Find out here : http://www.vr-zone.com/guides/Intel/Northwood/
  26. S

    best bang for your buck: Water cooling kit, or buy parts?

    What case are you using? If you cannot use 120mm fan/radiators, then consider adding another black ice micro (which is the exact same as the swiftech radiator) to your system.
  27. S

    best bang for your buck: Water cooling kit, or buy parts?

    I can't really recommend the Swiftech Kit because of the radiator (it is only uses 80mm fans).
  28. S

    best bang for your buck: Water cooling kit, or buy parts?

    http://www.hardocp.com/article.html?art=MzU3 19 Waterblock comparison, the Swiftech performed a tiny bit (about 1 Celcius) better than the DD Maze.
  29. S

    best bang for your buck: Water cooling kit, or buy parts?

    I wouldn't underestimate the DangerDen watercooling kits. For example:   MAZE3 AMD   Aluminum 120mm (90cfm) Fan   10xWhite 1/2 inch Hose Clamps   Hydor L20   Black Ice Extreme   5 1/4 Bay   10ft ClearFlex 1/2-inch Total: $192 at voyeurmods.com You can get a Eheim pump, but it'd cost ya about...
  30. S

    best bang for your buck: Water cooling kit, or buy parts?

    www.voyeurmods.com www.dangerden.com www.xoxide.com www.cooltechnica.com You can customize the kits to a certain extent, the price range is from $150 to $200 for a decent setup.
  31. S

    Quick SLK800 question

    You can use SLK800 on all Socket A CPUs.
  32. S

    Tt 420w Power supply is good?

    Hrm, if the Tt 420W can't handle what you are running, then Enermax 350W will also be inadequate. With 350W of total output, you'd only have 100W left for video card (radeon 9700 pro uses 54 watts), ram (roughly 10w per 128mb), and motherboard (~20w).
  33. S

    Tt 420w Power supply is good?

    Hrm, I'm not sure the Enermax 350W would be enough. Would you post the details of your calculations?
  34. S

    **POLL**SLK800 users, please look

    I always lap my heatsinks, especially if they have been installed before.
  35. S

    Tt 420w Power supply is good?

    Go with the 420W Tt. I use an Enlight 420W (exactly same as Thermaltake 420W and HighPower 420W, they are all originally manufactured by HighPower), and they work very well. The Enermax 350W is rated at 26A on the 12V rail, but you wont realistically come close to that because the total O/P...
  36. S

    Antec Plus 660AMG or Plus 1080AMG

    Get the 1080AMG because it includes a 430W truepower vs 660AMG's 330W truepower.
  37. S

    8mb buffer hard drives, WD vs. Maxtor

    I have a Maxtor 80GB (8mb) and a Western Digital 100GB (2mb version). I prefer my Maxtor because 1) SpeedFan and Dtemp can read temperature from the Maxtor, 2) Can choose between maximum performance/minimal acoustical output/balanced modes. If my WD drive had those two features, then I...
  38. S

    A7V8X and JIUHB Overclocking

    The problem is that its not me who is buying the CPU, its my friend. I personally wouldn't hesitate to experiment, but I don't want to give him bad advice.
  39. S

    A7V8X and JIUHB Overclocking

    A friend of mine wants to hold on to his A7V8X, but upgrade his CPU. Is the A7V8X a decent motherboard for overclocking a JIUHB? Is the multiplier unlocked by default- no need to connect the bridges? How high can the FSB go on the A7V8X? Any input is appreciated.
  40. S

    Will 3/8-inch tubing fit over 1/2-inch barbs?

    Right now, all of my water cooled components use 1/2-inch barbs and 1/2-inch tubing. I'm thinking of switching to 3/8-inch tubing and have a few questions about it: 1. Will 3/8-inch tubing fit? 2. Is 3/8-tubing generally more flexible than the ClearFlex 1/2-inch that I'm using? (the reason why...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |