Search results

  1. A

    What are temperatures like for a 2.4bghz with stock heatsink?

    O, i see, I used it with a thermaltake SmartCase fan2 on high and it let me OC my 1.6a to 2.3something stable and up 2.5something good for word processing. 2.4 was do-able altho I could only play a game like BF1942 for an hour.
  2. A

    What are temperatures like for a 2.4bghz with stock heatsink?

    By the way, are you using the Alpha PAL 8942 on that?
  3. A

    What are temperatures like for a 2.4bghz with stock heatsink?

    thanks, i have a BH7 as well
  4. A

    What are temperatures like for a 2.4bghz with stock heatsink?

    I know what u mean. The odd thing is, this never happened with Artic Silver. Artic Silver was stubborn, but I was able to use a screwdriver and seperate the sink and the processor while this stuff (antec version) was like Superglue. Anyhow, what are your temps like, just out of curiosity?
  5. A

    What are temperatures like for a 2.4bghz with stock heatsink?

    how about if it boots up at around 37 degrees Celsius and after two hours of BF1942, it is at 46 degrees celsius? By the way, this processor got ripped out of its socket a couple times. This was courtesy of some really crappy (Antec Silver Goop) thermal paste thatt superglued the processor to...
  6. A

    What are temperatures like for a 2.4bghz with stock heatsink?

    What are temperatures like for an intel P4 2.4b ghz processor with a stock heatsink attached?
  7. A

    Abit BH7 and P4 2.4b troubles?

    never mind guys. I re-assembled my heatsink/fan unit, plugged in the 3-pin plug from my TruePower PSU, and it works. I just installed WinXP Home and drivers and junk
  8. A

    Abit BH7 and P4 2.4b troubles?

    I tried my powersupply's 3-pin plug for monitoring, and it didn't work at all. My RAM and vid. card all work, so i think the only thing it could be is either the mobo or the processor. I am going to rule out the processor because i handled it for a second or so. I took it out of its packaging...
  9. A

    Abit BH7 and P4 2.4b troubles?

    Well, same old problems. I'm getting that long beep, no POST, and nothing at all appearing on the screen. I tried the 9700pro in a differnet system yesterday at a LAN party and it worked out great. THe DDR was used by my friend the other day and that worked out good. So i don't know. Do u think...
  10. A

    Abit BH7 and P4 2.4b troubles?

    Thanks Max, will do. Once i do, i'll let u guys know. That sounds like it to me.
  11. A

    Abit BH7 and P4 2.4b troubles?

    Yeah, it does have a 3-pin with all three wires. when i get home, i'll give it a shot.
  12. A

    Abit BH7 and P4 2.4b troubles?

    You know what guys, i might have goofed. I Technonot, your right, i probly don't have it set the right way. Well, i'll have to play around with it to see how it should properly be plugged in. Also, I have a nearby (in the case) Coolermaster BlueLED fan that has a 3-pin connector, i believe for...
  13. A

    Abit BH7 and P4 2.4b troubles?

    yeah, but i already have an RPM monitored fan connected to it, my thermaltake SmartCaseFan 2
  14. A

    Abit BH7 and P4 2.4b troubles?

    My manual has ABSOLUTELY NO definitions of these beep codes. Also, the memory is great so it can't be that. Also, try the link i posted (it doesn't work, copy and paste it) becaues that guy had the same problem me and another member were having. He had to RMA it. What does everyone think? I...
  15. A

    Abit BH7 and P4 2.4b troubles?

  16. A

    Abit BH7 and P4 2.4b troubles?

    At the Abit.com forums, (http://forum.abit-usa.com/showthread.php?s=&postid=55561#post55561), someone has a problem exactly like mine under "BH7 woes"
  17. A

    Abit BH7 and P4 2.4b troubles?

    i'm back a little early because something happened. I unplugged all the IDE cables, floppy cable, and USB header cables. I booted it up with the case off and it started making long beeping noises. I have no idea what this beep-code means. Does anyone know?
  18. A

    Abit BH7 and P4 2.4b troubles?

    u know what, i will be back in like 30 minutes or so (i have some other work to do) so if you think of any thing, please leave me a message on this thred. Thanks for all your help. and thanks for the help from everyone else too.
  19. A

    Abit BH7 and P4 2.4b troubles?

    k, thanks, i will. Also, i have a stick of Samsung true DDR2700 from newegg.com with heatspreaders. If the proc. is smoked, then i'll just have to get a new one i guess. Well, hopefully it isnt
  20. A

    Abit BH7 and P4 2.4b troubles?

    I can try a different stick of RAM. Also, i'm very sure the mobo is fine, otherwise those lights wouldn't be on at all. What do u think about the processor being dead?
  21. A

    Abit BH7 and P4 2.4b troubles?

    I did it exactly as you said, but things are exactly the same
  22. A

    Abit BH7 and P4 2.4b troubles?

    alright, thanks, i'm going to do it right now, BRB
  23. A

    Abit BH7 and P4 2.4b troubles?

    Alright, i just looked at my manual and it has a diagram of what jumpers to change, which is easy. To i just change the jumper to the "clear CMOS" position, then after 3 seconds or so, with the power completely off just put the jumpers back the way they were by default? Or do i have to turn it...
  24. A

    Abit BH7 and P4 2.4b troubles?

    I'm back, i just checked something and i wanted to see what you all thought before i cleared the CMOS. The mobo has two indicator lights, one for the powersupply being turned on, the other for the system itself being turned on. THe power supply one works fine and is green when the power supply...
  25. A

    Abit BH7 and P4 2.4b troubles?

    One thing, sorry if this sounds like i don't know a lot, but couldn't i try to hold the "insert" key while it boots first before i start playing with the CMOS? Also, my mobo booklet should have specific instructions on how to reset the CMOS, right?
  26. A

    Abit BH7 and P4 2.4b troubles?

    i'll try that, but does anyone know what the signs are of a dead CPU that was either shoccked or damaged. I hardly even touched my CPU and was always grounded, but still. Just wondering.
  27. A

    Abit BH7 and P4 2.4b troubles?

    yeah, the CPUs fan is plugged into their right now.
  28. A

    Abit BH7 and P4 2.4b troubles?

    I just got my Abit BH7 and my intel Pentium 4 2.4ghz B version processor in the mail (mentioned it in the thread regarding the Abit mobos and in another thread regarding my overclocking setup). I used to have a 1.6a overclocking setup before, and except for a new Antec 430 watt TruePower...
  29. A

    Gigabyte GA-8SQ800 results?

    Thanks a million.
  30. A

    Gigabyte GA-8SQ800 results?

    I was just wondering if anyone knows of any reviews for this exact mobo. (not the Gigabyte GA-8SQ800 Ultra2 that was reviewed here at anandtech) Also, does anyone know if its a good OCing board or where I could find a good Sis655 based OCing board for less than $200. Thanks.
  31. A

    Epox Nforce2 and Epox 8K9A2+ KT 400 review!

    THanks, i'll check this out.
  32. A

    Does anyone know if and when the Shuttle XPC with nForce2 will be out?

    I hope so too. Do you know of any specific dates for this?
  33. A

    Does anyone know if and when the Shuttle XPC with nForce2 will be out?

    I was wondering when the Shuttle mini-pc using the nForce 2 chipset will be out or if it will be out at all. I am interested because I want to build an AMD Small Form Factor system that is portable and tiny and has PCI/AGP locking features for OC'ing, courtesy of nFOrce2. I'd then probly pair it...
  34. A

    *Update* 6-way nForce2 Roundup Online

    Hello. I would like to the see the following things if possible all though I really appreciate the simple fact that you guys are doing this 5-way roundup for all of us. Here are the things: -A look at FSB overclocking with the PCI/AGP locking features now available because I prefer FSB...
  35. A

    What is the best complete watercooling kit for an AMD XP 2200+ t-BRED

    I've got an AMD XP 2200+ with authentic Samsung DDR2700 RAM that can do 166mhz with fastest timings easily. My processor has a factory unlocked multiplier and i am using a thermaltake Volcano 7+ for it right now. Boot temps are between 38 and 42 degrees C. It is at stock voltage and speed right...
  36. A

    Questions about 1.6A Overclocking setup

    I ordered a 1.6A back in the beginning of July from newegg.com when i heard that they were being discontinued, so now, I've finally finished my original 1.8 thoroughbred AMD system, so I am looking for a motherboard, HS-Fan for the P4, and DDR RAM that will OC good (already have HD, FDD, DVD...
  37. A

    Anybody heard of GeIL memory?

    Yeah, same here, I am never getting Geil DDR again. I got some in a kit from Ocsystem.com (it was a pre-overclocked kit that was burned in and tested for me) that I was using to build a relative a fast computer cause they were on a tight budget and I soon found after taking off the heatspreaders...
  38. A

    O'Cing 1.6A, need help with mobo and watercooling choice.

    Hello, i am Oc'ing my 1.6A and plan on getting a watercooling setup from www.infinipro.com with their deluxe kit, small radiator with a better fan that i install, and their number 5waterblock with a better fan. I was wondering what everyone thinks of this and whether its a good idea cause...
  39. A

    XP 2200 how far have you Overclocked?

    thanks for your suggestion. does anyone else have ideas, cause i'm keeping an open mind about this and also, with my mobo (Asus A7V333), the RAM works fine (512mb Samsung DDR333) but i have heard of other people having problems. Does anyone know how to unlock the thoroughbred? Cause if i can't...
  40. A

    XP 2200 how far have you Overclocked?

    I just got a 2200+ and am wondering what to get for a cooling setup. I mean by a cooling setup, a heatsink/fan unit (say heatsink A with fan B for example). I have an Asus A7V333 motherboard and Samsung DDR333 (real Samsung) with a thermaltake aluminum heatspreader and my case is the...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |