alpha is the most bang for the buck... and u dont need air going in circles in ur case. u just need it to come in from the front and out of the back. keep the air moving.....not, in circles.... maybe get round cables? they are always nicer looking than those flat wires....and it also helps...
thx... on my PSU idle voltage is 1.69 and when i go to heavy load it goes down to 1.616. im planning on buying a antec truepower 430 watt PSU.....hope i get good results. ur sig is wrong, fix 3 mhz to GHz.
he doesnt have his videocard to test it....y dont u rip out the video card from the PC u are using now and install it to ur new rig??? run wcpu and also see if it OCs good....
engineering samples have a s spec codes starting with a Q.....and wcpuid would tell if it is a C1 or BO. how do i kno this??? i have one.....it might identify it as a 2.5GHz cpu though....
hmmm u coulda had this info 5 days b4 u found it. http://forums.anandtech.com/messageview.cfm?catid=29&threadid=855849&highlight_key=y&keyword1=p4b533%2Dv
i dont think some of them are outright lies....its really about what the highest speed u can OC ur CPU. i dont believe they are running it at that speed 24/7. its just like finding the limit of ur CPU. i think the OCers on the database have to email in a SS of WCPU or whatever. ur right, it is...
hmmm u didnt list ur CPU temp....ur probably around 50's??? well my p4 1.8@ 2.4 is running at a cool 33 idle and 40C max load. and im talking about more than 6 hours of prime it will not go over 40C...i also have nice airflow through my case though....
the p4 HSF are decent, but i noticed a 10C degrees drop when i added my alpha pal 8942. the intel HSF will be fine if u dont OC. if u do OC, the intel HSF is fine for small OCing. If u plan do try and get the most OC from ur chip then u will need a better HSF. to get a newer stepping u would...
im not sure about the VM but i can confirm that there is a 3/4 divider in the 1004.014 beta bios for the p4b533-V. u can get 3:4 mem dividers on the VM with the hack right? the only board that couldnt do it was the V mobo.
it works, i already tested it. u will notice that the divider is replaced with the frequency of the DDR speed. this is what every p4b533-V owner has been waiting for!
its true!!! with a bios flash of the new 1004.014 beta bios u can get 3/4 mem dividers!!! u have to get it at the asus euro or taiwan ftp. usa ftp doesnt have it. this is great!!!
im curious to which current chipset will support the new hyperthreading p4's.....i heard that the 850E, and 845E might be able to support it with a BIOS update but the 845G and the 845GL will not support it. can someone confirm this?
i have my alpha on it. the problem is gone and there hasnt been any sign of it since. i think it was the seating of my alpha. someone else had this problem on another forum and also had a alpha. it mighta been that the HSF was touching something??? i really dunno, but after reseating the alpha...
123 FSB is stable and fast, i didnt have the problem until i went to 128 then i went back down to 123 and the problem was still there. .....when i changed it to 128 it was stable but the right clik got slow. i can get my cpu to 133 and run 3dmark but the right clik is slow. and the only way i...
hi, i noticed that when i OCed my CPU to the limit, it slows down the response time of a right clik to the desktop for the menu to come up. after i set it back to default speed and voltage, the right click on the desktop is still slow. i can right clik other stuff and the menu will come up...
hi, i noticed that when i OCed my CPU to the limit, it slows down the response time of a right clik to the desktop for the menu to come up. after i set it back to default speed and voltage, the right click on the desktop is still slow. i can right clik other stuff and the menu will come up...
well i jsut wanted to update u guys, after taking it out of my case and packing everything into the box, i decided to test it one last time with the intel HSF. i started it and there was no noise anymore!!! the stock HSF really sucks! i was getting temps of 41 idle and 47 on load. with my alpha...
im getting this high pitch noise when my comp is under heavy load or when i use my scroller to scroll up and down a webpage.....can anyone help me? when i run prime 95 it makes the high pitch noise and it is loud....very annoying.....plz help me....
hi, im new to the forums and was wondering if anyone found out how to get these dividers on this board. i wanna run my memory faster instead of keeping it at 132 with 3:4 or having it higher than 132 with 4:5.....it seems there isnt a way to get these dividers on the V mobo, but i thought i...
he has the E board with a 3:4 ratio from a hack...the V wont let u get the 3:4 above 132.....as far as i kno but i would be interested if someone did find a way to get it.
u kno me crazy...they say CaRTmAn owns joo.....i got a p4 1.8a malay. SL63X, L147B192-1591. its an old 1.8a i assume because i bought it on ebay used....pack date is 1/6/02....will let u kno about the OC possibilities when i get a mobo this thursday....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.