Search results

  1. C

    Linksys router w/ multiple WAN IPs

    Thanks for your reply. That's fair, JackMDS, and a good analogy; although I'm not opposed to spending the money if it will work well. :) The SMC product sounds like it can do exactly what we need; I will look into it. Thanks again!
  2. C

    Linksys router w/ multiple WAN IPs

    Thanks for your replies. First of all, yes, the five IPs are DHCP-obtained. Next, am I correct in assuming that I'll need a crossover cable to plug into one of the LAN ports? As for security, yeah, I know it's definitely going to be wide open... we have ZoneAlarm and I was also planning on...
  3. C

    Linksys router w/ multiple WAN IPs

    I had a quick question about my router and was hoping someone here would be able to help me. First, a little background info. Currently, we're running a network behind a Linksys BEFSR81 8-port router, which is being used to share a cable internet connection. However, we do a lot of internet...
  4. C

    Only one PCI slot working; southbridge is shot? GA-7VRX

    Yeah... so true. (I'm just really happy this isn't MY comp.)
  5. C

    Only one PCI slot working; southbridge is shot? GA-7VRX

    Well, flashing the BIOS had no effect, unfortunately. One strange thing I neglected to make clear about the on-board audio is that once it is enabled in the BIOS, Windows will detect it, and drivers can be installed for it, but no sound can be heard at all, and we've tried a couple speaker...
  6. C

    Only one PCI slot working; southbridge is shot? GA-7VRX

    Hmm, interesting. Thanks for replying. Perhaps I will try to flash the BIOS, and see if it does anything.
  7. C

    Only one PCI slot working; southbridge is shot? GA-7VRX

    Hi, I was wondering if anyone can give me a little advice here. Yesterday, my roommate came home to find out that his PCI cards (Audigy, NIC) were not being detected in WinXP. Rebooting did nothing, so we reinserted the cards into various different slots, but to no avail. The cards work in...
  8. C

    The name(s) of your PC(s) ?

    Balthasar. (I just used Balthasar II in my sig to differentiate it from my old comp... ) The name of one of the Three Wise Men, and also used in Evangelion and Chrono Trigger. :)
  9. C

    Can it really be this easy??

    That's awesome! :D Now.. hehe... not that I doubt you but I'm just curious -- is the memory in the BIOS set to 800 or 1066? If it's set at 1066 then that's some great RAM! :Q
  10. C

    Norton Ghost 2003 on RAID-0??

    Ah, that's good to hear! Thanks for replying. :)
  11. C

    Applying AS3 to a P4 Cpu.

    Yep, cover the whole heatspreader. Other than that it's exactly the same procedure. :)
  12. C

    Norton Ghost 2003 on RAID-0??

    Hi, A quick question about Ghost 2003 that I hope someone can help me out with. :) Basically what I'm wondering is can Ghost 2003 be used with a RAID array? I've heard that it CAN, it's just not supported by Symantec. I'm using the onboard Promise Lite RAID controller on my GA-8IHXP, and I...
  13. C

    Which i850E Board? Which memory?

    I just wanted to add that you can also overclock pretty well with the 8IHXP... in my experience, at least. I would recommend it highly; but do note that some people are having troubles with it. The P4T533-C is also a great choice and seems to be very stable. And definitely, Kingston PC1066...
  14. C

    GA-8IHXP problems?

    I'm sorry to hear that. I have this board and it runs like a dream. 2.53@2.85, etc. That's great to hear your friend is happy with his Asus (P4T533-C?), but unfortunately even Asus has had their problems at times (P4T533 anyone? :disgust: )
  15. C

    Is this the weakest CPU review known to man?

    People sure love trashing the Inquirer, and yeah, I pity anyone who goes to there to read those PC Advisor "reviews" of hardware. However, though, I still think you can find some interesting articles about the actual industry there... :confused: (But I should add; don't get me wrong -- that...
  16. C

    P4 2.8***Motherboard Suggestions?++Ok,where to get Rambus?

    Right on. :) Post some benchies and stuff when you get the chance, if you want. ;)
  17. C

    Best 850E motherboard?

    I have to toss another vote of support in for the GA-8IHXP. :) Great board with a ton of features. I've had no issues with it whatsoever running my 2.53@2.85 with 2x256 Kingston PC1066. A note about the onboard RAID of the 8IHXP; you can use it as IDE channels, and you can even disable it...
  18. C

    1066Mhz RDRAM & Asus P4T533-C

    No problem; happy to help. Anyways, good luck with your new system and have fun! :)
  19. C

    1066Mhz RDRAM & Asus P4T533-C

    Well, even though I don't have this board I will try and answer a few of your questions. ;) AFAIK, to run at PC1200 speeds, you will have to use a FSB speed of 150 MHz. I don't think this board (or any RAMBUS mobo) has memory multipliers like you would expect to find with a DDR system...
  20. C

    Anyone care to talk me out of buying a ASUS P4T533?

    They're still having troubles on Hardforms as far as I can tell, but best of luck! I hope it works out for you, and if so, then that's awesome!
  21. C

    Gigabye GA-8IHXP - Setup problems

    Oh, I was wondering, what exactly do you mean by "slower than you expected" and "crappy performance"? Like, the system is sluggish? Or, are we talking 3Dmark? Some other benchmark? Or... :confused:
  22. C

    Gigabye GA-8IHXP - Setup problems

    Err, sorry, it's included in the Gigabyte utilities that you get with the mobo. Anyways, if you prefer not to use it, here is a direct link. http://ftp.gigabyte.com.tw/support/temp/8ihxp_f6.zip Hope that helps.
  23. C

    Gigabye GA-8IHXP - Setup problems

    What kind of RAM are you using? Also, you can use the @BIOS writer to get F6. :)
  24. C

    Anyone notice that the Gigabyte GA-8IHXP is now GA-8IHXP2!

    Hmm... that's strange. I just looked at my GA-8IHXP, and it was never listed as the 8IHXP2, but it's Rev 2.1, printed right on the board. And I got this probably six weeks ago. :Q
  25. C

    Need help setting up new GA-8IHXP!!

    Nice rig. :) And yeah, there is a setting in the BIOS that you will have to disable in order to show the POST screen. I can't remember what it is exactly, or where to find it (I'd check but I'm not at home).. but you should be able to find it. It's something about Show Logo at Boot or...
  26. C

    Need help setting up new GA-8IHXP!!

    Hamburgerpimp is right on the money. And yeah, since you can't unlock P4s you will probably never get to use that setting... unless you're lucky enough to get an unlocked Engineering Sample or something. :P Anyways, this board doesn't have an AGP/PCI lock, so if (when ;)) you overclock it...
  27. C

    P4 2.8***Motherboard Suggestions?++Ok,where to get Rambus?

    Sweet rig, Bellyofthebeast!!! :Q But definitely, don't settle for o/c'd PC800... you won't be disappointed with this Kingston PC1066 and the 8IHXP! When you do get it up, FSB150 is a nice and attainable target. ;)
  28. C

    Recommendations for a good, consumer-level RAID card?

    Thanks for the advice. :D
  29. C

    512MB vs 1GB RAM in P4 system

    As I recall, I didn't have to pay any duties or customs on it! :) Just the GST of course...
  30. C

    Recommendations for a good, consumer-level RAID card?

    Well, the on-board Promise Lite chip is alright, but I'm looking for something a bit better perhaps. Any suggestions for a good controller card to set up my two WD 80GB SE's? IDE RAID-0 is all I need. ;) What about something like this? Well, I'd appreciate any and all insight that anyone...
  31. C

    512MB vs 1GB RAM in P4 system

    FWIW, Googlegear does ship to Canada these days. ;) From their shipping options page: I was pretty happy when I learned this myself; got a great deal on my 2.53. :)
  32. C

    P4 2.8***Motherboard Suggestions?++Ok,where to get Rambus?

    Nice choice on the board IMO. ;) Now... as for that RAM. From what I've seen, Samsung doesn't make 256MB sticks of PC1066 -- or at least, they're not easily obtainable. They do make 256MB of RIMM-4200s, but that's an entirely different beast. Anyways, I'd recommend Kingston RAM; I haven't...
  33. C

    Gigabyte 7VRXP bios update (@Bios)

    Yep, my roommate has that board (ver. 2.0) and the @BIOS writer works fine under WinXP. I also use the one for my GA-8IHXP, no problems in any case. :)
  34. C

    svchost.exe in WinXP utilizing CPU

    Okay... I may have solved the problem. I checked tasklist /svc to see what was running under the svchost.exe with the PID matching LOCAL SERVICE. Four things were there: LmHosts, RemoteRegistry, SSDPSRV, WebClient Then, I checked services.msc. I couldn't find LmHosts, so I left that...
  35. C

    svchost.exe in WinXP utilizing CPU

    Thanks for your replies. :) Unfortunately, I'm not really sure. :o As I mentioned earlier, when I ran "tasklist /svc", there were only three services listed under the svchost.exe that matched the PID of the one that was hogging the CPU. I wish I could remember what the names of those three...
  36. C

    Monitor interference or is it dying?

    Ahh, I'm sorry to hear that, culex... I have a similar issue. :( The lower left corner of the monitor flickers, whether it's refreshing at 100 Hz or 60 Hz. Not only that, but there are some relatively faint vertical lines of discoloration running down the left side of the screen. They are...
  37. C

    svchost.exe in WinXP utilizing CPU

    Bump again... :o If nobody has any advice, I'd still be quite interested to hear how much of the CPU, on average, the LOCAL SERVICE svchost.exe is utilizing on other people's computers. My roommate (running XP Home) seems to have the same issue with his computer, so I'm wondering if this is...
  38. C

    How do I find out what's causing 50% CPU usage?

    You're probably right... :o :D
  39. C

    How do I find out what's causing 50% CPU usage?

    Well, the only reason I said that was because I just reinstalled XP Pro on a comp here, and I had to add that column in... :Q
  40. C

    How do I find out what's causing 50% CPU usage?

    Good point. :) I don't think that column is visible by default, so if you want to see it go to View >> Select Columns... and check the CPU Time box. ;)
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |