Search results

  1. G

    What PS?

    I told him that his PSU is adequate for running his setup. It might save him $200; that contributes something. It's not my fault that your icon is a clown, and you didn't read the reviews.
  2. G

    What PS?

    Yes. Jag87 is probably a power supply vendor. Sure looks like (and acts) like a clown.
  3. G

    Needs opinions on an LCD screen.

    Now that the HP is sold out I would probably go with one of the 22" panels. It should look good for a couple of years plus it costs much less than the Samsung.
  4. G

    Needs opinions on an LCD screen.

    I have the HP f2105, which uses the same panel and the 21" wide Samsung. Only complaint so far is that the DVI flickers in games (VGA does not), and the screen is blank on DVI when booting windows. Might be a video card issue. Otherwise, the panel is S-PVA, bright, has vibrant colors, and has...
  5. G

    What do you think would be faster?

    The K6-II 450 will almost certainly be faster than both of the others. The processor will first check L1 cache for the data. If the data is not in L1 it will look in L2. I don't know about this specific application, but if you are only running one program the required data will probably fit in...
  6. G

    22" LCD Recommendations

    Well, I just bought an HP f2105. It's a year-old model that's 21" and uses a true 8-bit Samsung S-PVA panel. The viewing angle, color quality, blacks, and text sharpness are all fine. The panel supposedly has an 8ms gray to gray response time but THG measured ~22ms using their method. Other...
  7. G

    So...do you think that I should...

    ...send back my hard drive. Yesterday I noticed my computer got really really slow (I was using IE), so I shut it down normally. Hit the power...hard drive spins up and goes "click click." Uh oh. Weird thing is it actually loads windows XP - but it took 10 minutes to load (literally). Windows...
  8. G

    Pentium 3 board

    I had the large electrolytic caps fail on an AOpen MX3S-T board. It doesn't look like AOpen makes the MX3S-T anymore nor any other Pentium 3 board. Does anyone still make a Pentium 3 board (i.e. a recent one that doesn't have bad caps), like for embedded applications? This application...
  9. G

    Performance hit?

    Let me put it this way - unless you bench the two machines you probably won't notice much difference, and both will become obsloete at the same time. However, flight sims are usually CPU bound, and it's only $50 or $60 for the extra cache, so why not. Benches
  10. G

    HD Question

    Update and questions: Bought a new SCA adapter that is LDV compliant and now I can boot from the Ultra2 controller on the adapter. Now I have a weird problem with the termination. The drive boots without the terminator (weird). That's probably making it run much slower that it should right...
  11. G

    68 pin versus 80 pin scsi ??

    Just to update: The U160, LVD compliant SCA adapter made a difference. Now I can use the Ultra2 SCSI controller on my adapter.
  12. G

    68 pin versus 80 pin scsi ??

    I'm actually facing this problem right now. I bought an SCA adapter that's terminated, but it's not LVD compliant. I can't run the drive in Ultra2 SCSI LVD mode, but I'm not sure if it's the adapter or my SCSI card. I ordered an LVD compliant SCA adapter to see if it makes a difference, and...
  13. G

    What do you think of this power supply?

    Your current PS is probably fine anyway, but one thing that (it seems) everyone overlooked about the first PS is that it can put out over 18A on the +12V line. Notice that it has two +12 rails. The manufacturer claims they are "independent," but that it not entirely true. Together, they put out...
  14. G

    HD Question

    Thanks - I was so obsessed with getting an adapter with a terminator that I overlooked the whole compatability issue. Also, I'm new to this and I didn't realize that it actually makes a difference!
  15. G

    HD Question

    Oh and I'm not crazy about this, right? Even a vintage 1999 4.5GB 10,000 rpm drive SHOULD blow away my 40GB 5400rpm drive if it's configured properly...
  16. G

    HD Question

    Yeah that could be it because I notice no difference between the modes. Is there any program/utility that will tell you how the adapter has the drive set up (i.e. Sync/Async, Wide, etc)? I googled but no luck so far.
  17. G

    HD Question

    You were right about the terminating twice - but still nothing on the Ultra2
  18. G

    HD Question

    Hey I'm trying to get the following working together: Seagate ST34502LC Cheetah SCA HD Link SCA to 68 pin SCSI adapter with active terminator Adaptec AHA-2940U2 Ultra2 SCSI adapter Link 68 pin cable with LVD/SE Terminator I hooked one end of the cable into the Adaptec ----> second end (with...
  19. G

    $10,000 UBER SYSTEM BUILD

    You can't be serious but I'd either buy a really nice monitor (but you'd probably have to squint at it), or I'd charge a few thousand for a "setup fee."
  20. G

    Local cable isp (Adelphia) vs Verizon DSL

    I had Roadrunner (Time Warner), but I live in a large apartment building and the speed just tanked after coming back to school from winter break. It was so bad that AIM couldn't connect sometimes. So I switched to Verizon because it just became available in my area. I have 1.8Mb/s down 160Kb/s...
  21. G

    Wireless antenna accessories. (The longer antennas you see at Radioshack)...

    You can also see my post about using aluminum foil, which is on the second page.
  22. G

    Will a P4 800fsb work in a 533fsb motherboard?

    I think the 2.8 has a multiplier of 14 (2800/200) so 14*133 = 1866 on a 533fsb.
  23. G

    Extending wireless range

    Basically you put the foil about 5cm behind the adapter. foil ---- 5cm ---- adapter ------------------------- wireless link ----------------------- access point
  24. G

    Extending wireless range

    Just in case anyone is trying to squeak a little extra range out of their wireless card... Aluminum foil. My signal was marginal so I placed a half-cylinder of aluminum foil around the back of the USB adapter at about 5cm from the antenna (5cm is about half the 2.4 GhZ wavelength). The result...
  25. G

    Connecting two routers

    I think it was th eautosensing ports that was screwing things up. A regular cable makes everything work great!
  26. G

    Connecting two routers

    By the way, I found this useful link with a picture. tworouters
  27. G

    Connecting two routers

    Thanks for the help - I will try this tomorrow. So basically I don't have to do anything - just disable DHCP on the Netgear, connect LAN to LAN via cable until the lights come on, and then the Dlink should just assign IPs to the computers conecting via the wireless access point? The only thing...
  28. G

    Connecting two routers

    I'm trying to share my internet connection and LAN using two routers. Router1: D-link (not wireless) - primary router Router2: Netgear MR814 (wireless) - secondary router Goal: Connect cable modem to the D-link and use its LAN for the wired computers. Then, use the Netgear for wireless and to...
  29. G

    IE6 CPU Use

    Oh yeah - I ran a virus check and it came up negative...
  30. G

    IE6 CPU Use

    I'm running IE 6 with service pack 1 and all the latest updates applied. One day I noticed everything became really slow, and according to task manager IE takes up 100% of the CPU - no matter what it's doing. I disabled active scripting and scripting of java applets and it behaves normally...
  31. G

    Is a tnt2 3.3V agp card or 1.5V?

    I used a Dell TNT2 M64 in my P4T533 for awhile without incident. I think all the Dell M64s are AGP 2.0 compliant. Older TNT2s will probably have issues.
  32. G

    radeon 8500LE vs. 9000 vs. 9000 Pro

    I think that the 9000s are DX8 parts not DX9, despite the naming convention. I'd get the 8500, but any of those cards should last awhile for light gaming and general use.
  33. G

    Need help building divx machine

    It's just an asthetic thing. I can't notice too much difference whether it on or off - especially on a TV. If I had the choice I wouldn't buy new stuff just to crank it up, but that's just because it doesn't do much for me.
  34. G

    A Refresh Rate Question

    Before the computer starts booting windows hammer F8 to bring up the start options screen (like safe mode, ect). Try enable VGA mode. It should boot at 640x480 at 60 Hz and then you should be able to adjust it.
  35. G

    Abit SI7

    Yeah I know - RDRAM's had it's day in the sun for now. Mabye SIS will continue making chipsets. Microsoft designed Windows XP to run ok on 128, and things run well on 256. I think there are 2 reasons I don't need more than 256 now: 1.) I don't use any of the extremely limited number of...
  36. G

    Need help building divx machine

    I do agree with jiffylube on this one - if you try it and it skips a cheap solution like he proposed is better than buying a decoder card.
  37. G

    Need help building divx machine

    If you don't slide the post processing bar to the higher quality settings your CPU and mobo should be able to handle it. You could always add a DIVX decoder board if it's a problem. You should really buy a bigger (mabye a cheap 20GB) hard drive. A Radeon 7500 is a good and cheap card. The video...
  38. G

    RAMBUS + 8x AGP..?

    This board has AGP 8x and is supposed to be in production. However, you can't buy it yet, and it probably uses the new(er) 32 bit RDRAM. AbitSI7 If you want to use your current RDRAM, which is probably 16 bit, then you should look at something like the P4T533-C or Gigabyte 8IHXP. I know Iwill...
  39. G

    Best video card for MS Flight Sim?

    blcjr, With the 9500 you should easily get a 25% increase by switching CPUs. I got about a 30% increase overclocking to 2133 on my system. This defiately shows that sims are CPU dependent with resonably modern video cards.
  40. G

    Best video card for MS Flight Sim?

    The video card does matter (somewhat - FS is really CPU dependent), but it depends on how old it is. The game was somewhat playable on my old Celeron 400 with a V2 SLI at 800x600 with a medium level of detail. Then, I upgraded to a P4 1.6a. I ran the same V2s in there for a while and saw a...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |