I thought I'd update this post for the benefit of others ...
I found some .5m (roughtly 1.5ft) cables at cpustuff.com (here)
They were pretty cheap ($4.50) and were delivered quickly.
The cables are much much stiffer than I expected. Perhaps so much so that it may be a problem in the...
Thanks Markkleb.
I did see those. They have the SATA-II (read e-SATA) connector.
They have a version with the internal "L" connector, but they are a Meter Long! (that's a lot for inside a case!).
As for interference, my friends in the "Large" OEM market tell me that they have far more...
Well, the non-shielded Serial ATA cables make me nervous (that's 99% of all SATA cables out there).
I've found a few that are shielded with the SATA-I style connectors (not the e-SATA connectors), but they are all 1 M long! (ugh).
Still hunting for them though :)
Is there a difference between SATA 1.5Gbs and SATA 3.0Gbs cables?
I can't seem to find any references to any differences?
Also, I'm looking for Shielded Internal SATA cables. Anyone know a good
place to get some?
Thanks.
There's nothing obvious on the cd (extra software or anyting).
I'll have to try an earlier version of EAC then.
There's something odd going on because you can hear it on the CD when played in a computer, but not so much in a cd player
I bought the Harry Potter & the Half-Blood Prince Audio Book on CD and am trying to burn it to my Ipod so I can listen on the way to work, but there are errors on the last track of almost every CD! Is there some kind of strange copy protection on these things?
Anyone else try to do this and...
No. I still don't have my ram back yet. I am waiting patiently, 30 days and counting (ignoring shipping times and only counting the days they have had my ram in their hands). I'm wondering if they are having business trouble or if they are discontinuing the product or something. I can't...
I think the thread is important for those who are having trouble on deciding what to buy for 2x1gig configurations :)
I must say, I wish I had just kept the memory instead of RMA'ing it. The 2.5-3-2-5-2T timings that I did get stable are STILL better than those ADVERTISED by any other ram...
I can chime in on this.
I bought the PDC2G3200LLK Patriot 2 x 1Gig PC3200 Low latency memory from Monarch for my DFI-SLR motherboard with Athlon FX55 (Rev Cg). This memory would not run 2-3-2-5-1T as advertised. The best I could get that was stable (lots of testing here) was 2.5-3-2-5-2T...
Thanks for the quick response.
I was thinking more of the base IP of the device itself.
Meaning that the device has an ip of 192.168.0.1 by default.
The DHCP assigns ip's from 192.168.0.100 - 192.168.0.199
I have the option of changing the device ip to say 210.210.0.1
and thus causing the...
My new wireless router has a default IP that it uses (192.168.0.1).
Are there any compelling security reasons to change this to something else?
If so, will any address do?
Thanks.
Moulin Rouge was excellent.
It is like nothing that has ever been made before.
Totally new, totally different...
If you liked Romeo & Juliet (Claire Danes Version)
you should like this.... it's out there.
<< What was Tom Cruise thinking ditching her?!?!
He's a Scientologist, critical thinking is obviously not his strong suit. >>
Obviously....
And you guys aren't going to believe this, but Obi Wan can Sing!!!
He's pretty damn good too (if it was his real voice, which It sounded like)
Hey guys,
I just saw Moulin Rouge (sp?)!
It kicked ass.
It is the weirdest movie since the Rocky Horror Picture show.
It is the most original movie since Pulp Fiction.
It has the most intriguing filming method since Romeo & Juliet
It is the most musically cool since Into the Woods.
It...
When I try to use the 3c90x.0 file (with aliasing it in the modules.conf file) and using insmod 3c905
it gives me an error (can't work, device in use or something....then it says it might be an irq or port problem).
Is there a way to check what IRQ it expects it at? it's IRQ 3 in win,....
It's...
I have a 3com 3c905 ethernet card and I can't seem to figure out how to get it to work in RH7...
I tried downloading some drivers from 3com, but they won't even comipile!!!
Any help is appreciated.
I'm installing Linux for the 1st time on my Athlon kx133 system.....
How many partitions do you need for the install?
What size should the swap be?
Are there any issues with running it off a second ide channel?
Do you have Mcaffee Virus Scan installed?
It caused my modem to disconnect all the time under Win ME.
If so, try uninstalling Virus Scan and see if your modem still disconnects.
This problem has to do with IRQ conflicts.
I had my Hauppage WinTV PCI on the same IRQ as my network card and got crashes all the time when using the internet.
Once I switched the IRQs, everything was fine.
pm....
eat degrades silicon...
If your processor gets too hot, you will damage it...
It will break down.
Current also decays transistors... indefinitely is a LONG time...
High current parts are more likely to break down quicker...
Under normal operating conditions you should be ok.
"Burn...
There was a serious problem with people remarking processors in and around Australia I believe. If you buy a remarked processor, and put it in your machine and it crashes...who's responsible...
Most people would hold AMD responsible. That's the problem. It would be the equivalent of you...
There is sometimes a difference in rated temperature
between OEM and Retail parts. There can also be a difference
in rated voltage (Intel will make Dell a special voltage
part if they want one...)
Check the specs before you buy. Otherwise, the parts are
identical
There's really no such thing as a "900mhz core"
In reality, these are parts that, if they had passed all the tests, would have been marked 900. But instead, because they failed some tests, they were down binned (and retested) at a lower speed until they passed.
A "900...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.