The 2200+ is a horrible Overclocker. I owned a Revision A processor (do they make a rev B?) and it ran at 55C idle. This is with a Lian Li case, and an AX-7 w/ 5000rpm fan.
SAME exact case, SAME exact HSF.
I bought a 2100+ Rev B AIUHB 0302 and it runs @ 41C underheavy LOAD
(This is @ 2200mhz)...
I read on AMDMB.com (Here) That the Capacitators on the A7N8X are really close, and that an AX-7 is nearly impossible to install on it. Any comments from AX-7 / A7N8X users?
Ok here is a little update to the situation:
I can successfully boot into Windows if the 80gb OS drive is on a chain with the CDRW, and the 120GB drive is with the DVD (split up the HDDs on seperate IDE channels)
BUT- still only works with "fail-safe" method, which disables USB and some other...
Epox 8k3a (no RAID)
WD 1200JB + WD 800JB HDDs
I think my problem lies in my motherboard, but I am asking a few outside opinions.
The Epox motherboard has always given me a few small problems, like one of my USB plugs does not work on it, and the I/O panel does not light the front lights on the...
I run an Athlon XP 2200+ on an Epox 8k3a Mobo.
I have a Thermalright AX-7 HS w/ a 4200RPM Mechatronics fan
( http://www.coolerguys.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=001&Product_Code=F-MT80&Category_Code=F-80 )
All of this is wrapped up in this case: (Blizzard 360 from...
Since you would be running through different providers and different IP classes, you would have to have some sort of server. (easiest)
I wouldnt want to manage and run all that software on my personal desktop.
Setup a DHCP NAT machine that acts as a gateway- then you have an itnernal IP
What should the FSB / External Clock be set to to run stock?
Its on a Kt333 board (epox 8k3a)
No overclocking, just default for optimal performance (using DDR ram)
I have been running SETI@Home for a couple of days now before I joined the group. Is there anything I have to to to make sure my CPU credit is going in for team time?
Also, how do I make myself "active" on the SETI Statistics comparison chart?
I have both the 800JB And the 1200JB
BOTH are excellent drives. Fast As hell- jsut put them on a RAID array :)
I'd recommend spending the little extra on the drives. If you don't mind buying OEM, check out
monarchcomputer.com (107$) or newegg.com (107$)
I run a 2200+ on an Epox 8k3a+
The Epox board > *
I <3 it. The only decision was Between that and the Asus A7V333
Throw in some Corsair XMS PC 3200 DDR (512MB)
And you've got a killer system.
BTW- the Tbred chips heat up my dorm room. If I get hot I shut down and hte A/C takes over.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.