thanks beamer. Icould not decide between the 797 or the 3802 either. I just closed my eyes and picked one. This is my first home theater receiver so it was just a crap shoot for me. With this deal I will get the THX logo on the front of the machine for less than $700. But you could just as...
I just posted this over at the hometheaterspot.com enjoy.
This is a little complicated but I think worth the time. I just ordered a 797 for $999 from Crutchfield using the msn passport express wallet go here for details http://www.eshop.msn.com/softcontent/softcontent.aspx?scmId=907 you will...
I invited some friends over last night to watch basketball and after a few beers the talk got around to vibratory feeders. After a few more beers we decided to try tuning my aging vibratory feeder. After many calculations with the slide rules and trying many different stiffness of springs and...
After doing a little more research maybe I just didn't know how to tune my vibratory feeder correctly. I don't know why they don't give you instructions when you get them. After years of service I now know that the lowered vibration is caused by the spring not being stiff enough. For everyone...
I noticed yesterday that ecost had these on sale for another 22 hours and they were only going to sell 100 of them and that 100 was down to like 72. Well today on the timed countdown offers there is 23 hours and 57 min left to the sale and 100 left to sell. It just smells. I guess I will pass on...
yes I read that review, but that was when the monitor was close to 3 grand. I see now where the deal is only for 100 monitors and until tomorrow afternoon.
I found some places that sell and rent vibratory feeders on the net here are the specs copied from one page:
While Vibratory feeders are not a new concept they are often regarded as an "Art Form"
The Standard
11ga, Class 304 stainless
Part orienting tooling both...
well after last night i have been thinking. I do not need a new vibratory slide rule. I need a new vibratory feeder. I have three vibratory feeders at the house. 2 are 8 years old and unused, new in the box (and I plan on keeping it that way until they are at least 30) and there is a 40 year old...
After all this vibratory feeder talk, my vibratory slide rule was ready to do some heavy calculating last night. I woke up the little vibratory feeder only to hear something about a headache. Now what is a guy to do with a vibratory slide rule and nothing to calculate? The answer was right in...
Callgirl scared me, so I got to looking at reseller ratings and they are not good. I called and canceled the order. I don't know what to do. I really would like this deal but I just don't know about this pcmall ecost outfit. I must say the guy I just talked to on the phone was very pleasant...
I just ordered 2 of these from PCMall. It ended up cheaper than ecost because ebates gives 3% back at pcmall and only 1% at ecost and even though it was free shipping at ecost they were going to charge like $28 apiece for handling. Final cost 2029.11 - 3%= 1968.24 or 984.12 each. Seems like a...
Size matters? You mean all those vibratory feeders lied to me all these years? I am really depressed now. Does anyone know where to get one of those vibratory slide rule vacuum pumps? I have heard there was a doctor that could help vibratory slide rule deficient people like me. I will never look...
fdisk, first off BSE has never I repeat never been found in the USA. The ranch you spoke of in texas was sold some feed supplement that contained bone meal made from cows. It is important to understand that this is a compliance issue not a safety issue. The FDA prohibits the feeding of animal...
Telstar ROFL. You should be in movies. Mine is only half as big (when in use), I have vibratory slide rule envy. but every vibratory feeder I have encountered, my vibratory slide rule has got the job done. They tell me it's quality not quanity when it comes to vibratory slide rules.
this loooks to be a very hot deal. The best price I can find on this is about $1750. One is for sale on egay and the bid is at $1401. Is there something I don't know here?
My radeon seems to run fine but about 1 out of 5 times I boot up the monitor is unbearable to look at. I go to the on screen setup for the monitor and it says it is running at 60hz. Go to advanced display properties under adapter and there is nothing there to adjust as far as refresh rates. I...
wish I knew that 10 minutes ago David. I had to spend .88 on a box of rubberbands to get me over the $50 mark. So it goes. I guess I can always use more rubberbands though.
I think I will get a Memorex 48x cd-rom drive. 49.99 add something to get over $50 then take off the $20 coupon and there is a 30 rebate making total price free not counting shipping.
can anyone tell me what the difference is between the 50 and 87? They look the same other than a few more connections on the back of the 50. I have partially read the manuals of each and both seem the same. I am wondering if this would work with a regular 2 channel stereo
I just called it is the DPA-P87 model on sale. Shucks, I needed the DPA-S50. I have an old McIntosh integrated amp with McIntosh speakers and have been thinking about some way to get to digital while
still using my old stuff. This would be very cool. I will have to find a deal somewhere on the S50.
I had 1 stick of this I paid 139 for and it went bad about 2 weeks ago. I called them and a real live woman picked up the phone and told me they would have one to my house by 10 a.m. the next morning. I asked her the price and it was 89 so I ordered another
and both were here at 9:59 a.m. the...
For those that missed the 800.com deal Wards has the 32 inch Sony Wega for $999 - 10% = 899 then they take off another $75 in store discount. Makes the final total 824.99 before tax. Then apply for the Wards credit card and pay nothing down and no payments for 6 months. If you pay it off by June...
I just got my radeon and got it going then I decided to download dx8. Man, was that a mistake. It would not boot again. I reinstalled windows 98 got everything going again then tried reinstalling dx8 again. it will boot now but not with my ATI Tv wonder card
installed. I think I am going to have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.