Search results

  1. L

    Help! Upgrading laptop hard drive

    I have an older IBM PII 366 and I upgraded to a 20gb hdd. I had no issues.....I would go for it....if you have problems you may have to flash the bios to the latest version, but I wouldn't do that unless you have to.
  2. L

    Dell Service Tag Question

    The service tag is the same as the serial number for dell. I wouldn't worry about the electronic service tag on the systems. If your company has put electronic asset tags, that may be a different story. The asset.com program should work for any dell system (you can do a search under the...
  3. L

    Bootable USB keys

    Here is a couple of links to create bootable usb keys........ Create a bootable USB flash drive Dell forums Don't know if there are other manufacturers who have this option.....I'm gonna try it.
  4. L

    Bootable USB keys

    I know for a fact the newer dell desktops have "usb device" listed in the boot order.........
  5. L

    *** Official ABIT NF7/S (nForce2) Thread ***

    I was worried about the bios thing when I got mine, but I haven't had any problems. I have the latest bios and have not had any problems with the multiplier thing either(as you can see below, I'm running at 10.5 multiplier). I would just make sure if you are overclocking to take very small steps...
  6. L

    Can't lower the clock multipler on XP 1700+

    Does that board lock the pci and agp busses? I had a KK266-r mobo and it used the same chipset and the pci and agp busses weren't locked, so when you overclock you are overclocking the pci bus and agp bus as well. The hard drive is on the pci bus, so that could fry the hard drive if the bus goes...
  7. L

    Abit IS7 doesn't like Corsair TwinX PC3200LL?

    I don't have the same board, but you might want to make sure that the mobo doesn't require the ram to be in certain slots. I have an NF7-S 2.0 and after some problems, I read the mobo manual again and it stated that with pc3200 memory it can only run in slots 2 and 3.......like I said, I don't...
  8. L

    *** Official ABIT NF7/S (nForce2) Thread ***

    Ok, so I don't read so good......took a look at the mobo manual and it said that if you are running pc3200 memory.....it MUST be in slot 2 and 3.....sure enough, I changed to those slots and loaded XP and no problems.....prime95 for 22hrs w/ no errors........ :o
  9. L

    Dual Channel Memory Mode

    Look in your motherboard manual. It should tell you which slots the memory has to be in for it to run dual channel. If it is like mine, there is no setting to change in the bios. You have to make sure the memory is the same size and speed (pc2700 etc.) and make sure and put it in the slot it...
  10. L

    PLEASE help: nero doesnt recoginze burner

    This is a problem I've dealt with a few times....I had a problem with having a cdrw and a dvd drive on the same ide channel, 1 can be dma and 1 has to be pio. I had a problem with the DVD not playing right if it wasn't master w/ dma enabled and cdrw had to have DMA or it was real slow and cpu...
  11. L

    A7N8X Deluxe 2.0 or NF7-S 2.0?

    I'm assuming that that board is going into the green case? Good looking case, btw.....
  12. L

    A7N8X Deluxe 2.0 or NF7-S 2.0?

    I have the NF7-S 2.0 and I really like it. The atx power connector is not really that big a deal with that case, because you can actually run the cable inside that support bar that runs across the case (right above the latch in the picture). That is what I did on mine and it works well. The...
  13. L

    DDR400 reading as DDR333 on IC7-G MaxII

    KANEDA!
  14. L

    Has anyone upgraded their motherboard with Windows XP and not done a fresh install of Windows???

    Nothing beats a fresh install......if it is an option...
  15. L

    *** Official ABIT NF7/S (nForce2) Thread ***

    Try screenhunter....if you go to www.download.com and do a search for screenhunter it is a free program. It works well..
  16. L

    *** Official ABIT NF7/S (nForce2) Thread ***

    oops.....I was a little to quick on the enter button.....I just updated to the NF7D18 bios a couple of days ago and everything is fine for me....so far.
  17. L

    *** Official ABIT NF7/S (nForce2) Thread ***

  18. L

    NF7-s vs A7N8X Deluxe

    The layout is better on the Asus (my opinion).......but at the time I purchased; the Asus was $30 more. The problem with the layout of the Abit to me is that the atx pwr connector is in between the cpu and the back of the case, which could interfere with the cooling. I got around that by running...
  19. L

    Help with Gigabyte board and 333 fsb 2500+

    That mobo should work well with that processor. You should be able to go into the bios and set the cpu settings to auto or something and reboot and it should detect it properly. Just remember to do a "save settings and exit" when you are done.
  20. L

    Help on booting

    Try booting to the hard drive that works, copy NTLDR from c: to a floppy and copy it to the other hard drive, reboot....
  21. L

    PLEASE help: nero doesnt recoginze burner

    Make sure the burner is set as master, dma is enabled. Are the dvdrw and cdrw on same ide channel?
  22. L

    Buying my first router - recommendations?

    I've had a BEFSR11 (1port) for 1.75 yrs and it's been great. I ran that incoming leaktest thing and it passed 100%. I got the 1 port because I already had an 8port 10/100 switch (also Linksys), so I just connected the router to the switch. From the feedback received, Linksys sounds like one of...
  23. L

    *** Official ABIT NF7/S (nForce2) Thread ***

    Still where I was a couple of months ago, running stable w/ win2k. Prime95 no errors for 20hrs+, memtest no errors for 20hrs. WinXP is a different story.....with the same specs cpu 1.8v, mem 1.8, chipset 1.7v, prime95 ran 20hrs no errors one day and the next, failed after a few hours, then...
  24. L

    Lost windows xp administrator and all user passwords

    Cool.....:)
  25. L

    How to recover WinXP password?

    Ok here it is.... NT Password reset
  26. L

    Lost windows xp administrator and all user passwords

    oops....sorry..... http://home.eunet.no/~pnordahl/ntpasswd/
  27. L

    Lost windows xp administrator and all user passwords

    You don't want to delete the sam file.....just follow the instructions and use the password blanking thing....that works the best....
  28. L

    How to recover WinXP password?

    I just used a program to reset mine......I gotta figure out where I got it.....give me a little time and I'll see if I can find it for you...it works! It works with nt4.0/2000/xp.....
  29. L

    Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

    AIDA Memory bench Read: 3077, write: 1169 this is at 7-3-3-2 the post at the top of the page is with mem settings at: 10-5-5-2.5 When I went to 6-3-3-2 it went to: 3069/1169 I think the below specs are where I'm stayin'. If I go up to 11 multi it locks on its way into win2k, I went to 210 x...
  30. L

    Aida32 vs Sandra?

    AIDA32 read: 3077, write:1169 with 210x9.5 I hit 3201 and 1210 but prime95 took a dump in about 1min.....:(
  31. L

    Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

    ooops......:o I forgot to type....wow it's amazing how much room temp can affect cpu/case temp.....mine went down by 4 degrees after opening the windows and having the fan blow into the room....I'm still at 2100 200 x 10.5 @1.75v 47c, 26c case fans (down from 51c, 30c). Gonna try more aggressive...
  32. L

    Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

  33. L

    Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

    btw.....do you guys sleep????:)
  34. L

    Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

    I'm not complaining at all......believe me, I'm thrilled with the 700+ boost I'm getting. :) For $49 this is a great deal.....+ at the 200fsb x 10.5 it is faster than an XP2600+. Trust me when I had the celeron 300A overclocked to 450mhz I was happy with that too. It looks like Shim has this...
  35. L

    Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

    Not if I can help it...... 0311 XPMW at 2100@1.75v, chipset@1.7v Load temp 50c, idle 43c, i'm getting a mem read of 2886MB/s and write of 1065MB/s.....when I go above 180 x 12 it won't boot into win2k w/o 1.75v. 180 x 12 boots to windows but prime95 failed immediately, but 180 x 11.5 and 200 x...
  36. L

    Any AT'ers with the XP 1700+/1800+ T-Bred B's yet?

    I finally got my NF7-S V2.0 and OCZ PC3200EL mem last nite.....so of course I had to stay up late to put the machine together. :) I'm running my JIUHB0311 XPMW 1838mhz (11 x 166), no tweaks to anything else....yet and it is at 47degrees at full load (prime95 running). I'm still short one case...
  37. L

    Dell i8200 Continuous Start-Up Problems

    btw....just because dell diag doesn't find any problems, doesn't mean there aren't any....as you have probably surmised.....
  38. L

    Dell i8200 Continuous Start-Up Problems

    The lockup could be caused by a number of things and if it is not even making it past the logo screen sometimes, then that would suggest hardware.....the tightening of the screws used to help the older latitude cpi and cp because there is a power board right where the center keyboard screw goes...
  39. L

    DDR ram speed issues and questions. Please help

    i don't have that mobo, but it probably means it is running at 200mhz which is actually 400mhz or pc3200......DDR Double Data Rate transfers allows for data to be fetched on both the rising and falling edges of the clock thus doubling the effective transfer rate of the clock. For example a...
  40. L

    Cable internet question

    oops, I didn't mention that I pay $41.95 for cable internet....
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |