Search results

  1. I

    AMD Raven Ridge 'Zen APU' Thread

    That's great news if RR gets full android support. Since Intel stopped supporting its a great opportunity for amd
  2. I

    Software to change brightness/color on monitor?

    Can anyone recommend software that I can use to change the hardware color (RGB) and brightness on my LCD monitor? Hopefully one that has a taskbar icon so its easy to change between different profiles. Right now I need to manually go through the monitor settings to change them every morning...
  3. I

    Non-Gmail email for everyday use

    Why not just use the email account that your ISP provides you?
  4. I

    Win7 automatically deletes pictures off thumb drive?!?!

    I have windows set up so when I attach my camera it automatically downloads the files and deletes them on my camera. This is good. -BUT- now when I plug in my usb drive windows must think it is a camera because it downloads the pictures and deletes them from my usb drive. Extremely...
  5. I

    nvidia portrait mode: tearing while scrolling?

    I have a nvdia 9600gt and while it works fine in landscape, it has an annoying problem with tearing in portrait mode when scrolling. I made a video to demonstrate the difference: http://www.youtube.com/watch?v=xihLOVhUI1M This problem is present in both win xp and windows 7. I am using...
  6. I

    IDE Channel died on mobo: What should I do?

    Why not just buy a pci IDE card or something like that? They couldn't be very expensive
  7. I

    Intel Burn Test + Prime95 = Error?

    So what you guys are teasing me about (but never saying explicitly) is that my computer SHOULD fail if I run both prime95 and intelBurnTest simultaneously?
  8. I

    Intel Burn Test + Prime95 = Error?

    Either my motherboard or RAM is bad. My store warranty is almost out. If I don't RMA either soon I will have to ship them back to the manufacturer which is a major hassle.... If I can get the RAM stable at lower settings I will be pretty sure the RAM is the problem (yes I've tried memtest!)...
  9. I

    Intel Burn Test + Prime95 = Error?

    Yep stock settings. I have also tried running things lower than stock... MadScientist, I'm not sure how your post is related to the original question...? It would be awesome if somebody with a stable system could run prime95 and intelburntest simultaneously and tell me if it works for them :)
  10. I

    Intel Burn Test + Prime95 = Error?

    I'm troubleshooting my system. I seem to have got it so it can run Prime95 without errors and IntelBurnTest without errors when I run them separately, but when I run them simultaneously IntelBurnTest always fails on the second pass (regardless of any bios settings I make). Can anybody run...
  11. I

    i7 920 Random BSODs

    I got a new i7 920 system about a month ago. Here are the specs: intel i7 920 D0 gigabyte ex58-ud3r 6gb ocz obsidian ram 1600MHz 9-9-9-9-24 (off the top of my head) Corsair TX750W 60gb OCZ vertex Windows 7 Professional I overclocked my i7 to 3.8GHz. the voltages were nothing...
  12. I

    X58 vs P55 Showdown

    i have been waiting for these for forever to decide whether i should get a x58 or p55 system. i have given up on waiting and will buy my x58 system tomorrow. Therefore, according to murphy's law, the p55 mb reviews should be out first thing monday morning :P
  13. I

    MSI P55-CD53 Motherboard Review

    http://www.hitechlegion.com/re...i-p55-cd53-motherboard Wow, looks really impressive. Too impressive actually @ 4.4Ghz overclock... Hmm... guess i still need to wait for more reviews to see that this one isn't just an outlier :(
  14. I

    *The Official 22? Chi Mei 6-bit TN Panel Thread*

    When I received this monitor I noticed the colors words as good as my viesonic pf775, but I wouldn't call it terrible. I never noticed the blockiness or banding. I don't suppose there could be some way we could compare?
  15. I

    I'm a bit behind on CPU information.

    Actually, the 4000+ runs at 2400Mhz which makes everything work out okay.
  16. I

    Athlon 64 pin mod for changing mulipliers

    Hi, I have an Opteron 165 that over clocks to 2600. Unfortunately, at that speed, my memory only runs at 370ddr... I would like to be able to play with the multipliers as well to improve my memory speed. I was wondering if there are any pin mods to change the multiplier on A64 cores like...
  17. I

    From Zalman 7700Cu to Scythe Ninja Plus

    Looks good :-) but there was really no need to put that fan in the front. You already have the rear exhaust and the ninja fan pulling air from that opening. If the front fan is noisy at all, feel free to remove it. Your temperatures shouldn't even increase by a degree. But again, good work...
  18. I

    Fan controller knobs, will it fit in a doored case?

    Thanks for the advice everyone, I ended up buying the sunbeam. It works very well. I can finally say I have a fully overclocked and quiet computer :-)
  19. I

    Fan controller knobs, will it fit in a doored case?

    Thanks are the reply Elc :) sorry about not having private messages turned on. Putting my optical drives my case was also hard, I remember having to send down the edge of the rails so that I could reasonably get the drive to fit. Galvanized Yankee: I wish I could get the prices you are...
  20. I

    Fan controller knobs, will it fit in a doored case?

    Thanks for the replies. I measured and it looks like I have about .8-.9cm clearance. Probably a little closer to .9cm hmm.. Are there any other comments, perhaps maybe about controller may be better? Thanks Ian
  21. I

    Fan controller knobs, will it fit in a doored case?

    Hi, I have a antec slk3000B case, which has a door, as can be seen here: http://images.google.ca/images?q=slk3000B&hl=en&btnG=Search+Images What I am looking for is a fan controller, but I'm afraid that I probably won't be able to close the door if I install it. Do you think it will be...
  22. I

    From Zalman 7700Cu to Scythe Ninja Plus

    Try removing one of the drive bay covers on the front of your case in front of the ninja fan. Then cover the opening with a screen or something like that. This will ensure that your heatsink gets fresh air from the outside. It should drop your temperatures quite a bit. I have both 120 mm...
  23. I

    21-Way CPU heatsink roundup

    This round up sucks. No offense, but why o why are you still using single cores for testing in this day and age? it is just silly.
  24. I

    Opteron 165

    I think that there are maybe sure more weeks in China than we have in the West
  25. I

    AMD heatpipe HSF Vs. Scythe Ninja

    I have an opteron 165 and replaced the stock heatsink with the ninja. For me, I think it is only two to 4° cooler at load. It is not a big difference, although it is quieter. I was pretty disappointed actually. Has anyone had the same experience?
  26. I

    Opt 165, Asrocks939 OC help

    All questions for that board are on this forum http://www.ocworkbench.com/ocwb/ultimatebb.php?/forum/30.html look in the look in the faq
  27. I

    memory bandwidth comparison single core opty vs. dual core opty

    I think it's probably because you screwed around with the memory timings
  28. I

    Stock hsf for opteron 144 939

    This doesn't answer your main question, but when I got my opteron 165 ship through the mail, the green foamy thing on it was cracked also. In itself, I don't think that is a big deal. It is pretty brittle, so I don't necessarily think that means it was preopened...
  29. I

    Poor results with Scythe Ninja ??

    Have you tried tightening the four screws up on the bottom of the heatsink? the screws I am talking about are the ones that attach the copperplate to the aluminum part of the heatsink. I was able to tighten each screw about half a turn on my ninja. I am not sure if it will make much of the...
  30. I

    scythe ninja mounting question

    lol, again thanks for your help, but everyone seems to be answering questions other than the one I asked ;) Anyways, scythe finally got back to me with an answer. There is no problem. Here's what they said: _________________________ Dear Mr. Mills, Greetings from Scythe. Hope this...
  31. I

    Need 2Gb memory kit to run at 229MHz

    There was another AWESOME post comparing different Memory speed and timings for A64 processors. It was much more in depth than just comparing 1t vs 2t. It also compared setting in different megahertz and other timings. It had benchmarks for at least 15 different programs (including many...
  32. I

    scythe ninja mounting question

    Sorry if I wasn't clear, but I am not talking about the backplate. I am talking about the retention bracket. Look here http://www.scythe-eu.com/products/cpu/n...CNJ1000accessory.jpg&titel=Accessories It is the black thing in the top left-hand corner, the thing that the heatsink attaches...
  33. I

    scythe ninja mounting question

    I recently bought and mounted the ninja on my Asrock 939 dual sata2 motherboard. I removed the original CPU retention bracket and replaced it with the one included with the heatsink. What I noticed though, was that the 4 feet on the ninja retention bracket don't pass through the four holes...
  34. I

    I think my OCed AMD 64 is no more :(

    If it is your motherboard that died, chances are that some of the capacitors will be blown. Take a close look, if it is your first time finding a blown capacitor, it can be a little difficult, but once you know to look for, it is easy to find. The tops of the capacitors are often popped out...
  35. I

    Arctic Silver 5 Guide

    What if your heatsink isn't very flat on the bottom? do you still not apply as5 to the base at the heatsink? I have a ninja scythe and you can literally use the bottom to sand dowm your nails. (nails - the things on the end of your fingers). I used a ton of TIM to fill in all the grooves on...
  36. I

    Need opinions on heatsink

    Did your processor come with the stock cooler? if It is one with the 4 heat pipes, aftermarket coolers won't lower your temperatures more than a couple of degrees. Read here: http://forums.anandtech.com/messageview...atid=37&threadid=1783325&enterthread=y There's a good chance you'll be...
  37. I

    Dual Opteron stock cooling the best?!

    Okay, I'm exaggerating a little bit, but not much. Take a look at this review: http://www.neoseeker.com/resourcelink.html?rid=101285 (read the whole article for little more in-depth) The zalman CNPS9500 LED is only 1°(!) cooler than stock to opteron cooler. 1°!!!!!!!! and if you remember...
  38. I

    radeon 9500 pro replacement fan

    lol guys thanks for your help, but I'm not looking for a heatsink. I'm just looking for a replacement fan. Any ideas?
  39. I

    Big typhoon vs scythe ninja

    Thanks for your advice everyone. I ended up getting the scythe ninja. Unfortunately though, temperature doesn't really seem to be any better than with the stock opteron 165 heatsink. Piece of crap(!) I'm still experimenting, but there does not seem to be much of a difference. There is...
  40. I

    radeon 9500 pro replacement fan

    Hi, the fan on my radeon 9500pro has been buzzing really loudly. I opened it up and put a little mineral oil (the only oil I had ;) in it. It seems to be making less noise and I think it should be okay for now. But what I am wondering about though, is where can I buy a replacement fan for the...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |